Instruction/ maintenance manual of the product JLBIDW 1201 John Lewis
Go to page of 32
JLBIDW 1201 Dishwasher Instruction manual.
Important safety information It is most importa nt that this inst ruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner,.
For electrical and water connecti on carefully follow the instru ctions given in the specific paragraphs. Child safety • This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appl iance.
Ecological hints To save water and energy and help protect the environment, we recommend that you follow these hints: • Ensure that the water softener is correctly adjusted. • Do not prewash under running water. • Select the washing progra mme to suit the nature and degree of the soil on the dishes.
Contents For the user Important safety information 2 Description of the appliance 6 Control panel 7 Start/Cancel button 7 Washing programmes 9 When the appliance is first installed 10 The water soften.
Description of the appliance 1. Upper basket 2. Water hard ness dial 3. Salt container 4. Detergent dispenser 5. Rinse aid dispen ser 6. Rating plate 7.
Control panel The controls are on th e top on the control panel. To operate with the controls, keep the appliance door ajar. 1. On/off button 2. Programme indicators 3. Indicators 4. Start/Cancel button 5. Half load button On/off button Press this button to switch on or off the appliance.
Half load button This function is useful and economical when baskets are not fully loaded. It decreases the duration of the programme and reduces the consumption of water and energy. Remember to load both baskets. When using the Half load fun ction we recommend that you reduce the dose of detergent that is normally used for a complete load.
Activating the acoustic signals 1. To activate the acoustic sig nals again, do steps (1) through (4). The pr ogramme indicator ( A ) goes off and the End indicator is off. The progra mme indicator ( B ) continues to flash. 2. Press the Start/Cancel button aga in.
Programme Programme time (minute) Energy (kWh) Water (litre ) 50° Economy 130 - 140 1.0 - 1.2 14 - 16 Rinse hold 12 0.1 5 The consumption values are intended as a guide. They depend on the pressure and the temperatu re of the water, on the variations of the power supply and on the quantity of the dishes.
Water hardness Adjustment of the water softener Use of salt Clarke °TH mmol/l man ually electronically 64 - 88 91 - 125 9.1 - 12.5 2 level 10 yes 53 - 63 76 - 90 7.6 - 8.9 2 level 9 yes 46 - 52 65 - 75 6.5 - 7.5 2 level 8 yes 36 - 45 51 - 64 5.1 - 6.
6. Switch off the appliance to confirm the opera tion. Filling with salt Caution! Only use salt specifically designed for dishwasher use. All other types of salt, especially ta ble salt, will damage the wa ter softener. Only fill with salt just before starting one of the complete washing programmes.
3. Clean up any rinse aid spilt during fillin g with an absorbent clo th to avoid excess foaming during the next washing programme. 4. Close the rinse aid dispenser. Press th e lid until it locks into position. Fill the rinse aid dispenser when the indicator ( 4 ) becomes clear.
For washing in the di shwasher the following cutle ry and dishes are not suitab le: are of limite d suitability: • Cutlery with wooden, horn, china or mother- of-pearls handles. • Plastic items that are not heat resistant. • Older cutlery with glued parts that are not temperature resistant.
The cutlery basket Warning! Knives with long blades, stored in an upright posi tion, are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
Caution! Ensure that the spray arms can rotate free ly before you close the appliance door. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the hi gher position.
Fill with detergent 30 20 1. Press the release button ( 3 ) to open the lid ( 4 ) of the detergent dispenser. 2. Put the detergent in compartment ( 2 ). 3. If the washing programme has a prewash phase, put a small quantity of detergent in compartment ( 1 ).
Select and start a washing programme Starting the washing programme 1. Switch on the appliance. Make sure that the appliance is in setting mode. 2. Select a washing prog ramme. Refer to 'Washing programmes'. • The related programme indicator comes on.
Unloading the appliance • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing fro m the appliance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
1 2 4. Remove the micro-filter ( B ) out of the flat fil ter ( C ). 5. Take hold of the coarse filter ( A ) by the handle with the hole and remove from the micro-filter ( B ). 6. Thoroughly clean bo th filters under running water. 7. Remove the flat fi lter ( C ) from the ba se of the washing compartment.
or solvents, since th ese can damage the surfaces and plastic parts of the appliance. Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dis pensers are cleaned regularly w ith a damp cloth. We recommend every 3 months you run the washing programme for heavy soile d dishes using deterg ent but without dishes.
Malfunction Possible cause Possible solution The appliance does not fill with water. The water tap is blocked or there is limescale on it. Clean the water tap. The water pressure is too low. Contact your local Water Authority. The water tap is closed.
The washing and dry ing re sults are not satisfactory You did not put the i tems correctly in the baskets, water did not touch all surfaces. Put the items correctly in the baskets. The spray arms could not turn freely. Incorrect position of the items in the baskets.
Technical data Dimensions Width 596 mm Height 818 - 878 mm Depth 555 mm Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Electrical connection Information on the el ectrical co nnection (voltage, overall power and fuse) is given on th e rating plate on the inner edge of th e appliance door.
During all operations that in volve accessibility to interna l components the appliance must be unplugge d. Be sure that once the appliance has been installed, it is ea sily accessible for the service engineer in the eve nt that a repair is required. Fixing to the adjacent units The appliance must be secu red against tilting.
max 85 cm min 40 cm max 400 cm The drain hose can face eithe r to the right or left of the app liance. Ensure the drain h ose is not bent or squashed a s this could prevent or slow down the discharge of water. The sink plug must no t be in place when the appliance is draining as this could cause the water to syphon back into the appliance.
Electrical connection The manufacturer accepts no liability for failure to observe the following safety precautions. Warning! Sa fety standards require the appliance to be earthed.
Repairs - after sales service Your appliance comes with a three year warranty. If it is not working correctly refer to "Something not working".
29.
30.
31.
John Lewis Partners hip 171 Victoria Street London SW1E 5NN www.johnlewis.com 156954030-A-022011 (Subject to change without notice).
An important point after buying a device John Lewis JLBIDW 1201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JLBIDW 1201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JLBIDW 1201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JLBIDW 1201 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JLBIDW 1201 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JLBIDW 1201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JLBIDW 1201.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JLBIDW 1201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JLBIDW 1201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
