Instruction/ maintenance manual of the product JJP-12 Jet Tools
Go to page of 4
JET JJP-12 Jointer-Planer A frustrating choice woodworkers often face is whether to get a jointer or a planer first. That choice is made more difficult because these machines compliment each other to dimension, square and smooth the wood.
Capacities To make the JET JJP-12 Jointer-Planer as capa ble as it is versat ile, the jo inting and planing width capacity is a full 12”. That capac ity allows you to work with wider boards without having to rip them down to fit common jointer widths in the 6 to 8” range.
The dust collection shroud with its 4”-diameter outlet port is also hing ed for use in both the jointing and planing modes. The shroud ha s an internal, gravity-operated baffle plate that helps direct the collection vacuum for m a ximum effectiveness.
the operator from pushing down directly ove r the cutter, something you shouldn’t be doing anyway. For edge jointing operations, the gua rd is adjusted to allow the m aterial to pass between its end and the fence. Here again, the unused cutter remains covered throughout the operation.
An important point after buying a device Jet Tools JJP-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jet Tools JJP-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jet Tools JJP-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jet Tools JJP-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Jet Tools JJP-12 will certainly help you make a decision on the purchase.
If you already are a holder of Jet Tools JJP-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jet Tools JJP-12.
However, one of the most important roles played by the user manual is to help in solving problems with Jet Tools JJP-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jet Tools JJP-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
