Instruction/ maintenance manual of the product JFM-5 Jet Tools
Go to page of 3
JET JFM-5 Hollow Chisel Mortiser Cutting accurate mortises can be a challenging task. The JET JFM-5 Hollow Chisel Mortiser is designed to produce extremely accurate mortises in a wide range of woods an d project designs, plus make this an easy task for the woodworker.
Power and Construction The JET JFM-5 Hollow Chisel Mortiser is equip ped with a 1HP, TEFC (totally enclosed fan cooled) motor th at delivers smooth, consistent power. The motor comes wired for 110V (11 am p) operation but can be converted to use 230V (5.
Versatile Work Table The JET JFM-5 Hollow Chisel Mortiser features a large 20”- wide by 7”-deep cast iron worktabl e with a 3 ½”-tall fence at the rear. A pre-cut and drilled MDF table surface board is included that protects your bits when drilling through m ortises.
An important point after buying a device Jet Tools JFM-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jet Tools JFM-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jet Tools JFM-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jet Tools JFM-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Jet Tools JFM-5 will certainly help you make a decision on the purchase.
If you already are a holder of Jet Tools JFM-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jet Tools JFM-5.
However, one of the most important roles played by the user manual is to help in solving problems with Jet Tools JFM-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jet Tools JFM-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
