Instruction/ maintenance manual of the product JML-1014 Jet
Go to page of 12
OWNER’S MANUAL JML-1014 Mini Lathe JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 253-351-6000 A WMH Company Auburn, WA 98071-1349 Fax 800-274-6840 www.
Important Information 2-YEAR JET offers a two-year limited LIMITED WARRANTY warranty on this product REPLACEMENT PARTS Replacement parts for this tool are avail able directly form JET Equipment & Tools. To place an order, call 1-800-274-6848. Pleas e have the following information ready: 1.
WARNING For your own safety, read this instruction manual before operating the lathe. Wear eye protection. Do not w ear gloves, necktie, or loose clothing. Tighten all locks before operating. Rotate the w orkpiece by hand before apply ing pow er. Rough out the w orkpiece before installing on the faceplate.
• ALWAYS USE SAFETY GLASSES. Also use face or dust masks if the cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses. • SECURE WORK. Use clamps or a vise to hold the work when it’s practical.
Electrical Requirements In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. Th is tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.
Specifications: JML-1014 Stock Nu mber ................................................................................................................... ..... 708351 Swing Over Bed (In.) ..............................................................
Uncrating 1. Remove contents from the shipping box. 2. Inspect contents for shipping damage and report damage, if any, to your distributor. 3. Be sure to keep the box and packing material should you need to pack the lathe for moving. 4. Do not clean the lathe with anything other than a damp cloth or a mild solvent.
Nomenclature and Use Spur Center (A, Fig. 2) - locks into headstock and holds the workpiece during spindle turning. Face Plate (A, Fig. 3) - attaches to headstock and is used in face plate turning operations. Drift Rod (A, Fig. 4) - slides into the headstock to tap the spur center free.
Changing Spindle Speeds 1. Disconnect the machine from the power source (unplug). 2. Open the access doors at the left side of the base (A, Fig. 6), and at the back side of the headstock (A, Fig. 7). 3. Loosen the motor plate lock handle (A, Fig. 8). Lift up on the motor plate handle (B, Fig.
7. Insert the spindle into the spindle pulley aligning the key. 8. Thread the handwheel onto the spindle leaving a little space between the handwheel and headstock. Tighten set screws. 9. Center the spindle pulley and tighten set screw. 10. Wrap the belt around the motor pulley (lower).
Parts List for the JML-1014 Mini Lathe Index Part No. No. Description Size Qty. 1 .......... JML-1 ................................. Headsto ck ........................................................ ............. .................... 1 ............ JML-1W .
40 ........ JML-40 ............................... Stud .................................................................. .......... ....................... 1 41 ........ JML-41 ............................... Tool Rest Body..........................
An important point after buying a device Jet JML-1014 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jet JML-1014 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jet JML-1014 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jet JML-1014 you will learn all the available features of the product, as well as information on its operation. The information that you get Jet JML-1014 will certainly help you make a decision on the purchase.
If you already are a holder of Jet JML-1014, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jet JML-1014.
However, one of the most important roles played by the user manual is to help in solving problems with Jet JML-1014. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jet JML-1014 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
