Instruction/ maintenance manual of the product JTA230 Jensen
Go to page of 8
3-SPEED STEREO TURNT ABLE WITH BUIL T -IN SPEAKERS AND SPEED ADJUSTMENT USER MANUAL JT A-230 PLEASE READ THIS USER MAN UAL COMPLETEL Y BEFORE OPERA TING THIS UNIT AND RET AIN THIS BOOKLET FOR FUTURE REFERENCE.
2 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE E XPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
4 IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Places subject to constant vibration. • Dusty, humid or moist places.
6 STEREO PHONOGRAPH OPERATION Please Note - Before Use - Remove the stylus protector . - Make sure that the t one arm is unlocked and free to move from the tone arm rest prior to operating. Lock the tone arm in place again when not in use. 1. Slide the Power On/Of f switch to the On position 2.
8 More information as well as open source code can be found on the provided CD or on the website at: http://audacity .sourceforge.net/ INST AL L THE USB DRIVE 1.
10 For additional help with recording and editing music by using the Audacity software, please visit http://audacity . sourceforge.net/ 1. Run the Audacity from the Windows start menu or double click the Audacity icon on your computer desktop. 2. The Audacity main screen appears.
12 6. Use the Audacity control panel to record or listen the music you have recorded - Click button to start recording. - Click the button to skip to start; - Click the button to skip to end; - Click the button to play; - Click the button to pause; - Click the button to stop.
14 TROUBLESHOOTING GUIDE SHOULD YOU EXPERIENCE DIFFICUL TIES IN THE USE OF THIS PLA YER PLEASE REFER TO THE FOLLOWING CHAR T OR CALL 1-800-777-5331 FOR CUSTOMER SERVICE. PROBLEM POSSIBLE CAUSE SOLUTION AC power cord is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit.
An important point after buying a device Jensen JTA230 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JTA230 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JTA230 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JTA230 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JTA230 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JTA230, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JTA230.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JTA230. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JTA230 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
