Instruction/ maintenance manual of the product JTA-475 Jensen
Go to page of 18
3-SPEED STEREO TURNT ABLE WITH CD AND CASSETTE MU SIC SYSTEM USER MANUAL JT A-475 DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
2 • Start your volume control at a low setting. • Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound l evel: Set the dial and leave it there. Taking a minute to do this now will help to prevent heari ng damage or loss in the future.
3 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before the appliance is operated 2. Keep these ins tructions - The safety and operating instructions should be kept for future reference.
4 17. Outdoor Antenna Grounding - If an outs ide antenna is connected to the receiver, be sure the antenna system is grounded so as to prov ide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No.
5 CAUTION Note: This product complies with DHHS Rule 21 Subchapter J at date of manufact u re. Follow the advice below for safe and appropriate operation. ON PROTEC TION AGAINST LA SER ENERGY EXP OSURE o As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing.
6 Should any trouble occur , remove the power source and refer servicing to qualified personnel. PRECAUTION FORE USE • UNP ACK ALL P ARTS AND REMOVE PROTECTIVE MA TERIAL. • DO NOT CON NECT THE UNIT T O THE MAINS BE FORE CHE CKING THE MAI NS VOL T AGE AND ALL OTHER CONNECTIONS HA VE BEEN MAD E.
7 (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Rules.
8 right speaker terminal 2. Connect the left speaker to the left spe ak e r terminals with the red wir e to L+ and the black w i r e to L -. 3. Connect the right speaker to the right speaker termi nals with the red wire to R+ and the black wire to R -.
9 Remote Control (For CD Operation Only) 16.) DUST COVER 17.) RE PEA T BUTTON 18.) RANDOM BUTTON 19.) POWER ON/OFF BUTTO N 20.) POWER ON LED INDICA T OR 21 .) AM /FM/F M S TER EO BA ND SWITC H 22.) FUNCTION SWITCH 23.) 3.5MM STER EO HEADPHONE JACK 24.
10 1) PROGRAM BUTTON 2) REPEA T/RANDOM BUTTON 3) SKIP/SEARCH FORW ARD BUTTON SKIP/SEARCH BACKW ARD BUTTON 4) CD TRA Y OPEN.CLOSE BUTTON 5) PLA Y/P AUSE BUTTON 6) STOP BUTTON 7) VOLUME + / - BUTTON (For CD, T ape, Phono and T uner) BATTERY INSTAL LATION 1.
11 LISTENING TO THE RADIO 1.) Press down the POWER button to turn the system "On ", power LED indicator ligh ts. 2.) Slide the FUNCTION selector t o the TUNER (Radio) position. 3.) Slide the BAND selector to the desired band, AM, FM or FM STEREO.
12 from entering the CD me chanism. Never place more than one CD in the CD tra y. If two discs a re loaded at the same time, the CD mechanism may jam and / or the discs the mselves may be damaged. TO BEGIN CD PLAYBACK After you have loaded the CD in the player: 1.
13 7.) Press the STOP button to stop programmed tracks playback. Press the PLAY/PAUSE button will resume normal playback. NOTE : If you press or SKIP/SEARCH buttons during programmed playback, the player will skip forward or backward to the next track that was programmed, and not to the next track in sequence on the disc that is being played.
14 6.) Set the Speed selector to 33, 45 or 78 rpm according to the record you a re pl aying. 7.) Lift the tone arm from the rest and slowly move it over the record. The platter will being to turn. 8.) Move the tone arm to the beginning of the record, or to t he start of a parti cul ar tr ack.
15 To avoid damaging the tape, it is recommended to take the cassette tape out of the deck after listening. BASS BOOST Press down the “BASS BOOST” button on the main unit if you want to enhance the bass when listening to the system. Press the button again to turn off bass boost effect.
16 Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch the t ape surfaces. COMP ACT DI S C CARE Handle the disc only by its edges. Never allow your fingers to come in contact wi th the shiny , unprinted side of the disc.
17 Symptom Possible Proble m Solution AC cord is not plugged into a w all outlet Plug the AC co rd into a wall ou tlet. The u ni t do es no t respond (no power). Wall outlet is n ot functioning. Plug another device into the same outlet to confirm the outlet is wo rking.
18 V ALID IN THE U.S.A ONL Y SPECTRA MERCHANDI SING INTERNA TIONAL, INC. warrants this un it to be free from defective materials or factory workmanship for a p eriod of 90 days fro m the date of original customer purchase and provided the product is utilized within the U.
An important point after buying a device Jensen JTA-475 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JTA-475 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JTA-475 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JTA-475 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JTA-475 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JTA-475, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JTA-475.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JTA-475. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JTA-475 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
