Instruction/ maintenance manual of the product JTA-450 Jensen
Go to page of 16
JTA-450 3-SPEED STEREO TURNTABLE WI TH MP3 ENCODING AND AM/FM STEREO RADIO INSTRUCTION MANUAL PLEASE READ THIS OPERATING MANUAL COMP LETELY BEFORE OPERATI NG THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE.
1 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF F IRE OR ELECTRIC S HOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGE ROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CA BINET REFER SERVICING TO QUALIF IED PERSONNEL ONLY.
2 7. Do not block any of the ventilation openings. I nstall in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, s toves, or other apparatus (including amplifiers) that produce heat.
3 FCC NOTICE: This equipment has been tested and found to com ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 LOCATION OF CON TROLS MAIN UNIT 1. Turntable 16. Play / Pau se Button 2. 45 RPM Adaptor 17. Record Button 3. Cue-lever (use this lever to lift th e tone arm). 18. Skip + Button 4. Tone Arm 19. Skip - Button 5. Speed Selector 20. SD/MMC Card Slot 6. Tone Arm Holder 21.
5 REMOTE CONTROL UNIT 1. PLAY/PAUSE BUTTON 2. RECORD BUTTON 3. STOP/CD/USB/SD BUTTON 4. SKIP- BUTTON 5. SK IP+ BU TTON 6. DISPLAY BUTTON 7. PROG BUTTON 8.
6 BATTERY CARE i. If the unit is not to be used for an ex tended period of time, remove the battery. An old or leaking batt ery can cau se damage to the Remote Co ntrol.
7 TIPS FOR BEST RECEPTION AM – The AM antenna is located inside the cabinet of the main unit. If AM reception is weak, change the position of cabinet until t he internal antenna picks up t he strongest AM signal. FM – During FM reception, always keep t he FM Wire Antenna fully extended.
8 IMPORTANT : Moving or jarring the Turntable without securing the Tone Arm Clamp (6) could res ult in damage to the Tone Arm (3). ENCODING RECORDS TO MP3 You can convert you favorite re cords into MP3 f iles and s tore then on a USB Flash Drive or SD/MMC Memory Card via th e US B port (22) or S D/MMC slot (2 0) located on the fron t panel.
9 USB / CARD OPE RATION The following tasks can be accomplished by ei t her using the controls on the REMOTE Control or those which have similar function markings on the JTA-450 m ain unit. This icon indicates that a task can only be performed using the controls on JTA-450.
10 2. The trac k will be re peated and s top unti l the STOP Button ( 3) is pressed. 3. To repeat a Folder, press the MODE button twice. " FOLDER " will light up. 4. The selected Folder will be repeated and stop until t he STOP Button is pressed.
11 PROGRAMMED PLAY Programmed play can only be achieved in Stop mode. 1. In stop mode, briefly press the MODE button (14) on the unit. Program Channel No. ‘ P1 ’ will brief ly appear. ‘ P ’ will then disappear leaving the Program Indicator,‘ PROG ’ and ‘ 1 ’ flash in the Displa y to prompt for input.
12 4. To star t recording briefly press the RECORD Button once. Copying USB Files to Card Copying Card Files to USB 5. To stop copying, briefly press the STOP Button once. DELE TING FI LES 1. With the U SB or Card in t he pla yback stop mode, press or Buttons to select the track to delete, for example tr ack 5 is selected.
13 4. Sound will then come out from t he system’s built-in speakers and the external Amplifier’s speakers simultaneously. 5. Set the VOLUME CONTROL (23) to “MIN” and adjust the sound level using the VOLUME CONTROL on the external Amplifier as desired.
14 STYLU S REPL ACEMENT PLEASE REFER TO THE DIAGRAM BELOW TO REPLACE THE STYLUS. NO ADDITIONAL STYLUS IS SUPPLIED WITH THE SYSTEM. CARE AND MAINTE NANCE 1. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used. 2. Avoid leaving your unit in direct s unlight or in hot, humid or dusty places.
15 TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the followin g chart or call 1-800-777-5331 for Customer Service. PROBLEM POSSIBLE CAUSE REMEDY • The unit is disc onnected from the AC outlet • Connect to an outlet.
An important point after buying a device Jensen JTA-450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JTA-450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JTA-450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JTA-450 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JTA-450 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JTA-450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JTA-450.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JTA-450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JTA-450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
