Instruction/ maintenance manual of the product JiMS-211i Jensen
Go to page of 9
OWNER'S MANUAL JiMS-21 1i (iPod/iPhone Not Included) PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE DOCKING DIGIT AL MUSIC SY.
TABLE OF CONTENTS 2 3 3 4 4 5 6 8 9 10 10 11 11 12 13 13 14 15 16 DEAR JENSEN CUSTOMER IMPORTANT SAFETY INSTRUCTIONS IMPORTANT NOTES COMPLIANCE WITH FCC REGULATIONS PRODUCT FEA TURES INSTALLA TION LOC.
3 When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However , improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
INSTALLA TION Clock setting battery back-up The battery back-up compartment is located at rear of the unit. (1) Remove the battery compartment door. (2) Follow the polarity diagram shown inside the compartment and install 2 x AAA batteries (not included).
7 1. Infra-red Transmitter 2. POWER button --- Turns the unit ON/Standby . 3. PRESE T / button ---- Save radio preset station ; iPod/iPhone play-pause. 4. iPod REP button ---- iPod / iPhone repeat playback. 5. iPod RAN button ---- iPod / iPhone random playback.
9 iPod/iPhone DOCKING If the docking port will not be used for an extended period of time, it is recommended to cover the docking port by using the “Dock Cover” insert (included). 1. Use the iPod adaptor included in your iPod and insert it into the docking area.
11 ALARM OPERATIONS Setting the Alarm time When the unit is at the standby mode : 1. Press the MODE button once , the alarm hour digits blink. 2. To set hour, turn the VOLUME wheel to obtain a desired value. 3. Press the MODE button again , the alarm minute digits blink.
13 TROUBLESHOOTING GUIDE Symptom Possible Problem Solution The unit does not respond (no power) AC Adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit.
SPECTRA MERCHANDISING INTERNA TIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
An important point after buying a device Jensen JiMS-211i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JiMS-211i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JiMS-211i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JiMS-211i you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JiMS-211i will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JiMS-211i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JiMS-211i.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JiMS-211i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JiMS-211i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
