Instruction/ maintenance manual of the product JCR-300 Jensen
Go to page of 14
MODEL JCR-300 AM/FM TALKING DUAL ALARM CLOCK RADIO WITH TALK ’N SET ® USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNINGS WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION : Use of controls or adjustments or performanc e of procedures other than those specified may result in hazardous radiation exposure.
11) Only use attachments/accessories specified by the manufacturer. 12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus co mbination to avoid injury from tip-over.
DEAR JENSEN CUSTOM E R Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can ma ximize the fun and excitement your equipment offers.
LOCATION OF CONTRO LS Controls and Functions of Unit 1. Volume Control 12. On/Off Button 2. ALARM 1 (AL1) On/Off Button 13. LCD Panel 3. Trigger On/Off Switch 14. Rating Label 4. < (Down) Button 15. Reset Button 5. Set Button 16. Battery Compartment Cover 6.
IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating applian ces such as electric heater s. • Humid, moist or dusty places. • Places subject to constant vibration.
E-6 WHAT IS TALK’N SET? Talk ’N Set is an innovative clock operating system using the latest voice recognition technology. It’s the HANDS-FREE way to set your alarm clock. No more fumbling with instructions or pressing multiple buttons to set the time and alarm.
E-7 Time To check the current time. * Factory preset time is 12:00AM. Set Time To set the current time in AM or PM. Alarm To check the alarm time and status of AL1 & AL2. If the alarm is currently off, you have the option to turn it on or vice versa.
E-8 7. When the alarm source is succes sfully understood, the unit will reply, “Please say the time you would like the alarm to sound, including AM or PM” while the current alarm time is displayed. 8. Say the time you wish Alarm One to sound in a clear, normal voic e without any pause between wo rds.
E-9 1. Start by saying the trigger word “Hello Clock Radio” or pr ess the SN OOZE BAR (#11). 2. The unit will reply “Yes” and will wait for your next command. 3. Say “Alarm” and the unit will announce the Alarm One time, play a brief sample of the alarm sound and also ask if you want to turn the alar m off if on.
E-10 2. If you do not wish the alarm to sound again, you c an disable it by pressing either the AL1 ON/OFF BUTTON (#2) or AL2 ON/OFF BUTTO N (#8). The corresponding alarm in dicators on the display (#25 & #26) will go off. 3. To enable the alarms again, press either the A L1 ON/OFF BUTTO N (#2) or AL2 ON/OFF BUTTON (#8).
E-11 - When sleep sou nd is playing, its volume ca n be adjust ed from lo w to high (level 1-4) by p ressing the > (UP) (#6) or < (DOW N) (#4 ) BUTTONS.
Note: In very rare case (such as an electrostatic discharge on a dry cold winter day), if the unit still fails to reset af ter pr ess in g th e RESET Button, you should unpl ug it from the AC power and then remove the backup batteries from the battery compartment at the bottom of the unit for at least 10 minutes.
E-13 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTE RNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of ori ginal customer purcha se and provided the product is utilized within the U.
An important point after buying a device Jensen JCR-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JCR-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JCR-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JCR-300 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JCR-300 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JCR-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JCR-300.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JCR-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JCR-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
