Instruction/ maintenance manual of the product JCR-255 Jensen
Go to page of 14
Please read and follow this instruction manual carefully before using the unit and retain it for future reference MODEL JCR-255 AM/FM DUAL ALARM AUTO TIME SET CLOCK RADIO INSTRUCTION MANUAL.
1 DEAR JENSEN ® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
2 W ARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED T O PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally , or has been dropped.
IMPORT ANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. Dusty places. Places subject to constant vibration. Humid or moist places. COMPLIANCE WITH FCC REGULA TIONS This device complies with Part 15 of the FCC Rules.
5 POWER SOURCE This unit is designed to operate on 120V/60Hz AC house current. Operating this unit from any other power source may cause damage to the unit, and such damage is not covered by your warranty . The radio is also pre-loaded with 2 x “AA” batteries for the battery back-up and for the Auto T ime Set clock system.
1. POWER ON/OFF BUTTON 2. VOLUME CONTROL 3. CLOCK SETTING UP BUTTON 4. CLOCK SETTING DOWN BUTTON 5. ALARM1 BUTTON 6. ALARM2 BUTTON 7. SNOOZE BUTTON 8. (AM/FM)BAND / CLOCK SET BUTTON 9. TUNNING CONTROL 10. TIME ZONE SELECTOR 1 1. DA YLIGHT SA VING TIME SWITCH 12.
7 1. ALARM 1 INDICA TOR 2. ALARM 2 INDICA TOR 3. MUL TI FUNCTION DISPLA Y 4. AM CLOCK INDICA TOR 5. PM CLOCK INDICA TIOR 6. SPEAKER 2 1 3 4 5 6.
AUTO TIME SET This unit features an Automatic Time Set system powered by 2 X “AA” batteries (3V DC) (Included), so you do not need to set the clock time when first plugged in. After the unit is plugged in, the LED display will show the current time automatically after you set the time zone and daylight saving time for desired area.
SETTING THE CLOCK In case the back-up batteries are accidentally removed. Y ou will need to set the clock manually . If the LED display is blinking 1. In standby mode, press the UP button to increase or press the DOWN button to decrease the minutes setting.
6. When you have finished listening, press the ON/OFF button once to turn off the unit. TIPS FOR BEST RADIO RECEPTION AM - The AM antenna is built inside the radio. If AM reception is weak, change the position of the unit until the internal antenna picks up the strongest signal.
5. T o stop the alarm immediately , press the ON/OFF button once. The radio will stop but the alarm remains set and will turn the unit on again at the same time on the following day . 6. T o turn off the alarm completely , press the ALARM button repeatedly until ALARM indicator turns off.
BACKLIGHT BRIGHTNESS OPERA TION Y ou can change the LED brightn ess by switching the HI / LO dimmer switch located on the side of the cabinet. AUXILIAR Y INPUT This unit features an AUX line-in jack for connecting your iPod, MP3 player or other digital music players.
SE R VIC E Please refer to the instructions on the enclosed warranty card for returnin g your unit for service. When returning the unit, please remove the battery t o prevent damage to the unit in transit and/or from possible battery leakage . W e are not responsible for battery returned with the product or for the cos t of replacement .
An important point after buying a device Jensen JCR-255 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JCR-255 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JCR-255 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JCR-255 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JCR-255 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JCR-255, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JCR-255.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JCR-255. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JCR-255 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
