Instruction/ maintenance manual of the product HD5212 Jensen
Go to page of 34
HD5212 Installation and Operation Manual DO[ {j8 t!lm -- Radio·.
HD5212 ~ TABLE OF CONTENTS Introduction 1 Preparation 2 Wiring 3 Installation 4 Front Panel Release 7 Operation 8 Tuner Operation 11 Satellite Radio Operation 13 CD Player Operation 15 MP3/WMA Operati.
HD5212 ~ &, Introduction Congratulations on your purchase of the Jensen HD5212 Mobile Receiver. It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen HD5212 installed by a reputable installation shop.
~ HD5212 Preparation Tools and Supplies The following tools and supplies are needed to install the radio. Torx type, flathead and Philips screwdrivers Wire cutters and strippers Tools to remove existi.
HD5212 ~ Wiring ~I SIRIUS XM XML XMR t-L-------------- ._._ .. --_ ..... -----------=l 1SA t Antenna Connector Memory/Battery (YELLOW) Connect to battery or 12 volt power source that is always live. The radio will not work if this wire is not connected.
~ HD5212 Installation This unit is designed for installation in cars, trucks and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio into the dashboard. These kits are available at electronics supply stores and car stereo specialty shops.
HD5212 ~ 9. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the tapping screw and washer provided.
~ HD5212 REMOVAL KEYS y~~.:.~ ,,: ..... _.-:.y,~. o Removing the Radio To remove the radio after installation, remove the trim ring by pulling outward on one side and then the other. Insert the removal keys straight back, with the notches facing up, until they lock.
HD5212 ~ Front Panel Release The'" (open) button (9) releases the mechanism that holds the front panel to the chassis. Detaching the Front Panel To detach the front panel: 1. Press and hold the power button (1) to turn the unit off. 2. Press the open button (9) and allow the front panel to fold down.
~ HD5212 Operation Power Press the (!) (power) button (1) or any other button on the front of the radio (except release) to turn the unit on. Press and hold the power button to turn the unit off.
HD5212 ~ Menu Operation Press and hold the rotary encoder (4) to access the system menu. Repeatedly press the rotary encoder button to access menu options in the following order: BEEP ON/OFF: The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed on the face of the radio.
~ HD5212 Reset Button The RESET button is located behind the front panel and should be activated for the following reasons: initial installation of the unit when all wiring is completed function buttons do not operate error symbol on the display Use a ball point pen or thin metal object to press the RESET button.
HD5212 ~ Tuner Operation Press the SRC button (2) to switch to HD RADIO mode. About HD Radio™ Technology HD Radio technology allows CD-quality digital broadcasting of your local AM and FM radio stations. HD Radio broadcasts can include multiple channels on the same frequency, which is called multicasting.
~ HD5212 NOTE: HD Radio multicast channels can be stored as preset stations. Recall a Station Select a band (if needed). Press a preset button (13-18) to select the corresponding stored station. Preset Scan Scans stations stored in all FM or AM bands.
HD5212 ~ Satellite Radio Operation Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com. or by calling (800) 967-2346. Customers should have their Radio ID ready (see "Displaying the Identification (ID) Code"). Customers can receive a limited number of free-to-air channels without activation.
~ HD5212 6. Press the BAND/ENTER button to enter the second number and move to the third position. NOTE: Use the TUNEICH» or TUNElCH« button (10 and 11) to move between the first and third positions. 7. Turn the rotary encoder again to select the third digit of the channel you want to tune to (0 - 9).
HD5212 ~ 60 19 CD Player Operation cop mode can only be accessed when a disc is inserted. If a disc is already in place, press the SRC button (2) to access COP mode and begin playback automatically. Insert CD Press the open button (9) and allow the front panel to fold down to display the disc slot.
~ HD5212 ejecting and reloading the disc into the player. While the disc is out of the unit, make sure it is clean and undamaged, and then load it correctly. If this does not solve the problem, pressing the reset button may help, but will erase the time and preset memory.
HD5212 ~ MP3/WMA Operation MP3 and WMA (Windows Media Audio) music files are digital audio files that are compressed to allow more files on a single CD. This unit can play MP3/WMA directly from files contained on a CD-R/RW, SO card or USB device using the buttons on the receiver (or optional remote control) as described below.
~ HD5212 File Playing Order When selected for play, files and folders (Folder Search, File Search or Folder Select) are accessed in the order they were written by the CO writer. As a result, the order in which they are expected to be played may not match the order in which they are actually played.
HD5212 ~ Pause Press the 1/>/11 button (13) to suspend disc play. Press the play/pause button again to resume play. Track Select Press the TUNE/CH » (10) or TUNE/CH « (11) button for less than one second to advance to the next track on the disc, or press and hold to fast forward or fast reverse through the disc.
~ HD5212 2. Turn the rotary encoder (4) to browse all available folder or files in the root directory. 3. Press the rotary encoder button to select a folder or file. If a folder is selected, two apostrophes (' ') appear on the LCD, indicating that the selection is a folder.
HD5212 ~ NOTE: The HD5212 will not select video files regardless of whether or not a video file was the last file playing when the iPod was plugged into the radio.
~ HD5212 Shuffle (SHF) Press the SHF button (16) to randomly play the files in all folders Press SHF again to stop the shuffle function and resume normal playback. Press and hold the SHF button to randomly play the files in the current album (folder).
HD5212 ~ Re .... ote Control The remote control will allow you to control the basic functions of the HD5212. The remote control sensor is at the top left below the SELECT button (5).
~ HD5212 Care and Maintenance CD Player The following guidelines will help you extend the life of your CD player: 1. When cleaning the vehicle interior, do not get water or cleaning fluids on the unit. 2. The CD player will not operate properly in extreme hot/cold or under damp conditions.
HD5212 ~ Troubleshooting Problem Cause Corrective Action Does not operate No power to yellow wire; Check connection with test light; (display does not no power to red wire check vehicle fuse with test.
~ HD5212 Specifications General Power Supply 11 to 16VDC, negative ground Power Antenna (Blue) 500mA max, current limited protection Operating Temperature -20C - 65C Fuse 15-amp, ATO type DIN chassis dimensions 7" X 7" X 2" (178mm x 178mm x 50mm) Specifications subject to change without notice.
Limited Warranty CD or Multimedia Radios/Headunits Audiovox Electronics Corporation ("the Company") is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800- 323-4815 with any questions.
If It', too LOUD - ~'retoo OLD! Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2007 Audiovox Ver.
HD5212 Receiver Quick Start Guide r;:==lillJ~~~"'~ [[J[S]EJIlJ~O IID=======~=====~========51:;::;;;g IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician.
v;£'·torJ'Techllolo v ;es ~ 0 'i.,,:~ INSTALLATION excellence 'I~~,~$i~1~*~;~~~= __ ~~~t~~~~~~ Three easy steps! 1. Visit www.jensen.com. 2. Click on the Victory Technology Installation Excellence Logo as shown above. 3. Enter your product serial number (example: xxxx_xxxxxxx_xx).
PRODUCT REGISTRATION Thank you for purchasing a JENSEN product. We pride ourselves on the quality and reliability of all our electronic products but if you ever need service or have a question, our customer service staff stands ready to help.Contact us at www.
Register Online at: WWW.AUDIOVOX.COM Click on Product Registration and Fill Out the Brief Questionnaire.
An important point after buying a device Jensen HD5212 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen HD5212 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen HD5212 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen HD5212 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen HD5212 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen HD5212, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen HD5212.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen HD5212. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen HD5212 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
