Instruction/ maintenance manual of the product A600HLX Jensen
Go to page of 15
® 40Hz 40Hz 0dB 0dB 12dB 12dB 40Hz 40Hz 400Hz 400Hz 400Hz 400Hz 8V 8V .3V .3V REAR LPF FULL HPF BASS FULL HPF LPF FRONT BASS LEVEL LEVEL R-CHX L-CHX R-CHX L-CHX 2CH 4CH 3CH POWER PROTECT channel bridgeable 400 MOSFET Power Supply 4 3 5 60 125 60 125 2 4 3 5 60 125 60 125 2 4 MODE Amplifier Installation and Operation Installation Assistance 1.
2 A400HLX, A600HLX ® Contents Features ......................................... 3 Installation ..................................... 3 Before Y ou Begin ......................................... 3 Disconnect Battery .................................
® A400HLX, A600HLX 3 Installation Disconnect Battery Before you begin, always disconnect the battery negative terminal. Befor e Y ou Begin Before you begin, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start.
4 A400HLX, A600HLX ® Routing Wires Location and Mounting Th e A400HLX/A600HLX amplifier ’ s compact design allows greater flexibility in mounting. It can be mounted under a seat or in the trunk. When selecting a location, remember that amplifiers generate heat.
® A400HLX, A600HLX 5 Wiring Power Remote T erminal (REM) P ower T erminal (+12V) Connect directly to the vehicle battery+ terminal with 8 gauge wire (minimum). Gr ound T erminal (GND) Connect to a good chassis ground. The ground connection should be to clean, unpainted metal to provide a good electrical connection.
6 A400HLX, A600HLX ® Inputs, RCA Output, Remote Level Contr ol Input Wiring Low Level Input (RCA Input) Low level (RCA) input is preferred for best performance. Most trunk/hatchback installations will require a 15-20 foot RCA cable. While pick- up trucks and under-seat mounting will require a 6-12 foot RCA cable.
® A400HLX, A600HLX 7 Remote Level Contr ol – Rear Amplifier (A600HLX) Remote level control allows the input level to be adjusted for the rear speakers from an alternate location.
8 A400HLX, A600HLX ® 2 Subwoofers/Bridged Mono (A400HLX) 4 Speakers Speaker Wiring Options 2 Speakers + Bridged Subwoofer 2 Ω minimum 2 Ω minimum RF RF LF LF –– ++ BRIDGE BRIDGE RR RR LR LR R.
® A400HLX, A600HLX 9 T ri-mode (A400HLX) Important When running a subwoof er and two full-range speak ers together (T ri- mode operation), high and lo w pass filters must be used. F ailure to install these filters ma y damage your amp and/or speakers .
10 A400HLX, A600HLX ® Adjust the crossover to accommodate your chosen installation method. • LPF – (low pass filter) Select this filter when the amplifier will be driving woofers or subwoofers. • FULL – Crossover is not active, amplifier is in “ full range ” mode.
® A400HLX, A600HLX 11 4 Channel 2CH / 3CH / 4CH The A400HLX/A600HLX can be configured for three different input modes: 4 channel, 3 channel or 2 channel.
12 A400HLX, A600HLX ® T est P ower Wiring 1. T urn on the receiver but do not turn up the volume. The amplifier power light should come on. If not, check the REM and +12V wires. 2. T urn up the receiver volume slightly . All speakers should operate. If not, check wiring connections at amplifier and speakers.
® A400HLX, A600HLX 13 T r oubleshooting Problem Possible Cause Corrective Action Amplifier does not operate (power LED not on) when vehicle and radio are on Radio volume needs to be turned up too hig.
14 A400HLX, A600HLX ® Specifications A400HLX/A600HLX 4-Channel Amplifiers Frequency Response ....................................................................................... 20 Hz-20 kHz ± 0.5 dB Signal to Noise Ratio @ Rated Power ..........
Recoton Mobile Electronics, Inc. 1090 Emma Oaks T rail Lake Mary , Florida 32746 ©2002 Recoton ® Limited One Y ear W arranty– USA and Canada Length of Warranty . This warranty from Recoton Mobile Electronics, Inc. shall be in effect for a period of one year from the date of the first consumer purchase.
An important point after buying a device Jensen A600HLX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen A600HLX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen A600HLX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen A600HLX you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen A600HLX will certainly help you make a decision on the purchase.
If you already are a holder of Jensen A600HLX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen A600HLX.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen A600HLX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen A600HLX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
