Instruction/ maintenance manual of the product JXT8042ADS Jenn-Air
Go to page of 24
RANGE HOOD INST ALLA TION GUIDE T ABLE OF C ONTENTS Safety Instructions.................................................... 1 List of Materials....................................................... 2 Mounting Heights..................................
INST ALLA TION GUIDE Read all Instructions before Installing and operating this appliance MODELS: JXT8030ADS JXT8036ADS JXT8042ADS Installation The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background.
LIST OF MA TERIALS 2 1 - Hood Body 1 - Duct Cover Assembly (2 pieces) 1 - Parts Bag: 1 - Duct Cover Mounting Bracket 2 - Mounting Brackets Packet of Mounting Screws 2 - Metallic Filters 1 - Metallic B.
INST ALLA TION 3 MOUNTING HEIGHTS & CLEARANCE DUCTING 28.94"-46.65" 5.31" 36" Min 24"-Max 32" *Min 88.94" *Max 114.65" Minimum mounting height between range top to hood bottom should be no less than 24".
INST ALLA TION 4 DUCTING NEVER exhaust air or terminate duct work into spaces between walls, cra wl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside. Use Metal ductwork only . Fasten all connections with sheet metal screws and tape all joints w/ certified Silver T a pe or DuctT a pe.
INST ALLA TION 5 SPECIFICA TIONS ELECTRICAL All Electrical work must by performed by qualified electrician or person with similar technical know how and background. For personal safety , remove house fuse or open circuit breaker before beginning installation.
INST ALLA TION 6 MOUNTING THE RANGEHOOD 1. Screw mounting brackets onto left and right side of blower unit. 2. Attach blower to canopy , fasten with screws from below . 3. Determine hood height, center , mark, level and hang hood to wall through mounting keyholes on back.
6" straight pipe wall pipe strap 6" T connector or 90 elbow INST ALLA TION 7 DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood.
HO T TE DE CUISINIÈRE INST ALLA TION GUIDE T ABLE DES MA TIÈRES Consignes de sécurité......................................................1 Liste des matériaux..........................................................2 Hauteurs de montage.......
MODELES: JXT8030ADS JXT8036ADS JXT8042ADS Installation Les procédures d’installation décrites dans ce guide s’adressent à des installateurs qualifiés, à des techniciens de service ou à des personnes possédant des compétences similaires. NE ten- tez P AS d’installer cet appareil vous-même.
LISTE DES MA TÉRIAUX 2 1 - Hotte 1 - Caches de conduits (2) 1 - Sachet de pièces: 1 - Languettes de montages des caches de conduits 2 - Languettes de montages Paquet de vis de montage 2 - Filtres M.
INST ALLA TION 3 HAUTEURS DE MONT AGE ET DÉGAGEMENT CANALISA TION 28.94"-46.65" 5.31" 36" Min 24"-Max 32" *Min 88.94" *Max 114.
INST ALLA TION 4 CANALISA TION L ’air ne doit JAMAIS être évacué et le système de conduits ne doit JAMAIS se terminer dans des espaces entre les murs, des vides sanitaires, des plafonds, des greniers ou des garages. T outes les sorties de ven- tilation doivent être canalisées vers l’extérieur .
INST ALLA TION 5 CARACTÉRISTIQUES TECHNIQUES ÉLECTRICITÉ A VERTISSEMENT T ous les travaux électriques doivent être effectués par un électricien qualifié ou une personne pos- sédant des connaissances techniques et de l’expérience similaires.
INST ALLA TION 6 MONT AGE DE LA HO TTE DE CUISINIÈRE 1. Vissez les crochets de montage de chaque cotés de la soufflante. 2. Fixez la soufflante au déflecteur , puis fixez à l’aide des vis, à partir du dessous. 3. Déterminez la hauteur de pose de la hotte puis centrez-la.
6" straight pipe wall pipe strap 6" T connector or 90 elbow INST ALLA TION 7 TRANSFORMA TION EN SYSTÈME DE RECYCLAGE La transformation de cette unité en système de recyc lage est recommandée pour des a pplications où il est impossible d’installer un système de conduits d’évacuation.
CAMP ANA DE C OCINA INST ALA CION GUIA C ONTENIDOS Instrucciones de Seguridad..............................................1 Lista de Materiales......................................................... 2 Altura de Montado..............................
GUIA DE INST ALACION Lea todas las instrucciones antes de instalar y usar este electrodoméstico MODELOS: JXT8030ADS JXT8036ADS JXT8042ADS Instalación La instalación descrita en este manual ha sido preparada para instaladores calificados, técnicos de servicio o personas con un entrenamiento similar y calificado.
LIST A DE MA TERIALES 2 1 - Cuerpo de la campana 1 - Ensamblado de la cubierta del conducto (2 partes) 1 - Bolsa de partes: 1 - Sujetador de montaje para la cubierta del conducto 2 - Sujetadores de mo.
INST ALACION 3 AL TURA DE MONT ADO Y ESP ACIO LIBRE TUBERIA DE EXTRACCION 28.94"-46.65" 5.31" 36" Min 24"-Max 32" *Min 88.94" *Max 114.65" La altura mínima de montado entre la parte inferi- or de la campana y la parte superior de la cocina no debe ser inferior a 24”.
INST ALACION 4 TUBERIA DE EXTRACCION NUNCA haga escapar el aire o termine las tuberías entre espacios de la pared, sofitos, techos, áticos o garajes. T odos los escapes de aire deben ser dirigidos hacia el exterior . Use tuberías metálicas solamente.
INST ALACION 5 ESPECIFICACIONES INST ALACION ELECTRICA T oda instalación eléctrica debe ser realizada por un electricista calificado o por una persona con conocimientos técnicos similares y con experiencia equivalentes. Para su seguridad personal, retire los fusibles del hogar o el interruptor abierto antes de comenzar la instalación.
INST ALACION 6 MONT ANDO LA CAMP ANA DE COCINA 1. Atornille los sujetadores de montaje a la derecha e izquierda de la unidad de extracción. 2. 2. F ije el extractor a la campana, afírmelo poniendo tornillos en la parte inferior .
6" straight pipe wall pipe strap 6" T connector or 90 elbow INST ALACION 7 CONVERSION SIN TUBERIA DE EXTRACCION La conversión sin tubería de extracción está hecha para situaciones en las cuales no es posible instalar una tubería de extracción de aire.
An important point after buying a device Jenn-Air JXT8042ADS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jenn-Air JXT8042ADS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jenn-Air JXT8042ADS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jenn-Air JXT8042ADS you will learn all the available features of the product, as well as information on its operation. The information that you get Jenn-Air JXT8042ADS will certainly help you make a decision on the purchase.
If you already are a holder of Jenn-Air JXT8042ADS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jenn-Air JXT8042ADS.
However, one of the most important roles played by the user manual is to help in solving problems with Jenn-Air JXT8042ADS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jenn-Air JXT8042ADS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
