Instruction/ maintenance manual of the product SS8C JBL
Go to page of 8
SS6, SS6C, SS8, SS8C, SSLCR, SS6DT PERFORMANCE ™ SPECIALIST OWNER’S GUIDE ® Performance Specialist OM 3/3/06 4:54 PM Page 1.
INCLUDED T emplate/paint shield (punch out at perforation). One pair of speakers with grilles. T emplate/paint shield (punch out at perforation). One pair of speakers with grilles. Model SS6DT includes one loudspeaker , since it is capable of reproducing two channels of audio.
3 40 0 – 60 0 WALL W ALL 5 – 6 ft. WALL W ALL FRONT SPEAKERS (SS6, SS8, SSLCR) MODELS SS6, SS8 AND SSLCR AS REAR SPEAKERS MODEL SS6DT IN-CEILING SPEAKER PLACEMENT Model SS6DT has the capability of playing two channels through one loudspeaker , thanks to its dual-tweeter/dual-voice-coil construction.
Phillips #2 screwdriver Measuring tape Utility knife Pencil Carpenter’ s level A wl T OOLS NEEDED Performance Specialist in-wall speakers are designed to be easily installed. However , if you are unsure of your ability to properly install these loud- speakers, please contact your dealer or a qualified installer .
5 SS6, SS8, SSLCR EXISTING CONSTRUCTION Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
SS6C , SS6DT , SS8C EXISTING CONSTRUCTION Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
7 NEW CONSTRUCTION P AINTING THE SPEAKER FRAME AND GRILLE Performance Specialist loud- speakers can be painted to match any décor . If you wish to change their color , the satin finish on the grille and frame will function as a primer coat. Before painting, install the paint shield (in the assembly kit) securely into the recess in the baffle.
S S6 Frequency Response 3 8Hz – 20kHz (–10dB) R ecommended Maximum Amplifier Power † 100 watts Impedance 8 ohms nominal Sensitivity 88dB (2.83V/1m) Crossover Frequency 2 ,800Hz Woofer 6-1/2".
An important point after buying a device JBL SS8C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL SS8C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL SS8C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL SS8C you will learn all the available features of the product, as well as information on its operation. The information that you get JBL SS8C will certainly help you make a decision on the purchase.
If you already are a holder of JBL SS8C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL SS8C.
However, one of the most important roles played by the user manual is to help in solving problems with JBL SS8C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL SS8C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
