Instruction/ maintenance manual of the product SP5II JBL
Go to page of 8
SP5II, SP6II, SP6CII, SP6CSII, SP8II, SP8CII SOUNDPOINT ® SERIES OWNER’S GUIDE ® Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 3.
2 INCLUDED T emplate/paint shield. Remove paint shield (inner rectangle) at perforation. One pair of speakers with grilles. T emplate/paint shield. Remove paint shield (inner circle) at perforation. One pair of speakers with grilles (SP6CII and SP8CII).
3 WALL W ALL 5 – 6 ft. WALL W ALL MODELS SP5II, SP6II, SP8II AS REAR SPEAKERS IN-CEILING MODELS SP6CII, SP6CSII, SP8CII Proper placement of the speakers is an important step in obtaining the most re al is ti c soundstage possible. These recommendations are for the optimum placement of the loud- speakers.
4 Phillips #2 screwdriver Measuring tape Utility knife Pencil Carpenter’ s level Awl TOOLS NEEDED The SoundPoint ® Series in-wall speakers were designed to be easily installed. However , if you are unsure of your ability to prop - erly install these loudspeakers, please contact your dealer or a qualified installer .
5 SP5II, SP6II, SP8II EXISTING CONSTRUCTION Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
6 SP6CII, SP6CSII, SP8CII EXISTING CONSTRUCTION Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
NEW CONSTRUCTION P AINTING THE SPEAKER FRAME AND GRILLE SoundPoint Series loud- speakers can be painted to match any décor . If you wish to change their color , the satin finish on the grille and frame will function as a primer coat.
2 Declaration of Conformity W e, Harman Consumer Group International 2, route de T ours 72500 Ch â teau du Loir France declare in own responsibility that the products described in this owner’ s man.
An important point after buying a device JBL SP5II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL SP5II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL SP5II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL SP5II you will learn all the available features of the product, as well as information on its operation. The information that you get JBL SP5II will certainly help you make a decision on the purchase.
If you already are a holder of JBL SP5II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL SP5II.
However, one of the most important roles played by the user manual is to help in solving problems with JBL SP5II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL SP5II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
