Instruction/ maintenance manual of the product SCS200.5BK JBL
Go to page of 12
SCS200.5 SURROUND CINEMA SPEAKERS OWNER’S GUIDE ® SCS200.5 OM 5/18/06 10:24 AM Page 1.
2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation open- ings.
3 INCLUDED THANK Y OU FOR CHOOSING JBL For more than 60 years, JBL h as been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS 5 –6 ft (1.5–1.8m) FRONT SPEAKERS 0–2 ft (0–0.6m) The front speakers should be placed the same distance from each other as they are from the listening position.
5 Prepare the speaker wire as described on page 7. Thread the two conductors through the two holes in the stand bracket. Make sure to pre- serve the proper polarity (+ and – connections) by threading the positive con- ductor through the hole on the left, and the negative conductor through the hole on the right, looking at the front of the stand.
Important Safety Note: The customer is solely responsi- ble for proper selection of mounting hardware not included with the speakers, and for proper assembly and installation of the wall brackets, including but not limited to the selection of appropriate weight-bearing supports and proper use of the bracket.
7 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire, as shown. The wires sup- plied with the system may already be stripped and tinned for easy insertion into the speaker terminals. Y ou may need to separate the two conductors further in order to thread them through the shelf stand or floor stand adapter .
8 DOLBY PRO LOGIC ® (NON-DIGIT AL) – LINE LEVEL Use this installation method for Dolby Pro Logic ® applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/proces- s.
9 DOLBY PRO LOGIC (NON-DIGIT AL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor do.
10 OPERA TION Move the Master Power switch (marked “Power” å ) t o the “•” (On) position to use the SUB200 subwoofer . If you will be away from home for an extended period of time, or if the subwoofer will not be used, switch the Master Power switch å to the Off position.
If there is no sound from any of the speakers: • Check that receiver/ampli- fier is on and a source is playing. • Check that the powered subwoofer is plugged in, and its Power switch å is switched on (“ • ” position). • Check all wires and con- nections between receiver/ amplifier and speakers.
12 SCS200.5 F requency Response 35Hz – 20kHz (–6dB) SA TELLITES Maximum Recommended Amplifier Power 100 W atts Power Handling (Continuous/Peak) 50W/160W Nominal Impedance 8 Ohms Sensitivity 86dB @.
An important point after buying a device JBL SCS200.5BK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL SCS200.5BK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL SCS200.5BK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL SCS200.5BK you will learn all the available features of the product, as well as information on its operation. The information that you get JBL SCS200.5BK will certainly help you make a decision on the purchase.
If you already are a holder of JBL SCS200.5BK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL SCS200.5BK.
However, one of the most important roles played by the user manual is to help in solving problems with JBL SCS200.5BK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL SCS200.5BK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
