Instruction/ maintenance manual of the product SCS160 JBL
Go to page of 12
SCS1 60 SURROUND CINEMA SPEAKERS OWNER’S GUIDE.
2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation open- ings.
3 INCLUDED THANK Y OU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS 5 – 6 ft FRONT SPEAKERS 0-2 ft The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listeners’ ears will be, or they may be angled toward the listeners.
5 MOUNTING OPTIONS On shelves. W ALL-MOUNTING On the wall. W all brackets are included. Slide speaker onto support. On optional stands (FS400). Place speaker and support on wall plate. Attach plate to wall. The brackets should be placed, if possible, so that the screws will fasten into a wooden wall stud.
6 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. Speakers and electronics terminals have corresponding (+) and (–) terminals. Most manufac- turers of speakers and elec- tronics, including JBL, use red to denote the (+) terminal and black for the (–) terminal.
7 DOLBY* PRO LOGIC* (NON-DIGIT AL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS ® or other digital processing), where the receiver/process.
8 DOLBY PRO LOGIC (NON-DIGIT AL) – LINE LEVEL Use this installation method for Dolby Pro Logic appli- cations (not Dolby Digital, DTS or other digital process- ing), where the receiver/ processor is.
9 OPERA TION MIN MAX Sub woofer Level MIN MAX Sub woofer Level Move the Master Power switch (marked “Power” ¡ ) to the “•” (On) position to use the subwoofer . The SCS160 subwoofer will auto- matic ally turn on or go into standby (sleep) mode when left in the auto mode (“Auto/ On” switch ™ in the “Auto” position).
10 If there is no sound from any of the speakers: • Check that receiver/ampli- fier is on and a source is playing. • Check that the powered subwoofer is plugged in, and its Power switch ¡ is switched on (“ • ” position). • Check all wires and con- nections between receiver/ amplifier and speakers.
11 If there is no sound from the surround speakers: • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other .
12 SCS1 60 System Frequency Response 30Hz – 20kHz (–6dB) Satellites Recommended Power 10 – 100 W atts Impedance 8 Ohms nominal Sensitivity 88dB @ 1 W att/1 meter Tw eeter One 1/2" (13mm) ti.
An important point after buying a device JBL SCS160 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL SCS160 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL SCS160 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL SCS160 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL SCS160 will certainly help you make a decision on the purchase.
If you already are a holder of JBL SCS160, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL SCS160.
However, one of the most important roles played by the user manual is to help in solving problems with JBL SCS160. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL SCS160 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
