Instruction/ maintenance manual of the product SCS 140 JBL
Go to page of 10
X + 0 + Y 2 0M HZ OWNER’S GUIDE PRODUCT LINE: SCS 140, SCS 146, DSC 1000 (230V) DESIGN GOAL: Bring the thrill of live performance and movie sound to the home environment by calling on JBL ’ s professional engineering leadership.
INCLUDED Four satellites for left/right front and surrounds. Wall- mount brackets. SCS 146 contains an additional satellite to be used as surround back.
3 1.52 – 1.83m (5 – 6 ft.) 0 – 0.61m (0 – 2 ft.) Subwoofer Front Speakers Center Channel Speaker SPEAKER PLACEMENT Surround Speakers (SCS 146) 1.52 – 1.83m (5 – 6 ft.) Surround Speakers (SCS 140) The front speakers should be placed the same distance from each other as they are from the listening position.
4 MOUNTING OPTIONS Satellites and Surrounds On shelves. Wall-Mounting Attach plate to wall. The brackets should be placed, if possible, so that the screws will fasten into a wooden wall stud. If that is not possible, use properly selected wall anchors.
5 Separate and strip the ends of the speaker wire as shown. Speakers and electronics terminals have corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, including JBL, use red to denote the (+) terminal and black for the (–) terminal.
6 Dolby* Pro Logic* (Non-Digital) – Speaker Level (SCS 140 and SCS 146) Use this installation method for Dolby Pro Logic applications (not Dolby Digital, DTS ® or other digital processing), where t.
7 Dolby Pro Logic (Non-Digital) – Line Level (SCS 140 and SCS 146) Use this installation method for Dolby Pro Logic applications (not Dolby Digital, DTS ® or other digital processing), where the re.
8 OPERA TION MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Power switch (marked “Power” ¡ ) to the “ • ” (On) position to use the subwoofer . The SCS 140 subwoofer will automatically turn itself on or go into standby (sleep) mode when left in the standby mode (“Auto/On” switch ™ in the “Auto” position).
9 If there is no sound from any of the speakers: • Check that receiver/amplifier is on and a source is playing. • Check that the powered subwoofer is plugged in, its Power switch ¡ is switched on to the “ON•” position. • Check all wires and connections between receiver/ amplifier and speakers.
JBL Consumer Products 250 Crossways Park Drive, Woodbury , NY 11 797 Europe: 2. Route de T ours, 72500 Château du Loir , France www.jbl.com ©2003 JBL, Incorporated.
An important point after buying a device JBL SCS 140 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL SCS 140 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL SCS 140 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL SCS 140 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL SCS 140 will certainly help you make a decision on the purchase.
If you already are a holder of JBL SCS 140, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL SCS 140.
However, one of the most important roles played by the user manual is to help in solving problems with JBL SCS 140. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL SCS 140 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
