Instruction/ maintenance manual of the product PS120 JBL
Go to page of 12
PS PS SERIES POWERED SUBWOOFERS OWNER’S MANUAL PS 1 00 PS 1 20 PS60 PS manual[P].qXp2 7/27/98 3:24 PM Page 2.
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE AMPLIFIER BACK. NO USER SERVICABLE PARTS INSIDE.
3 INTRODUCTION Congratulations on choosing JBL loudspeakers. Their highly accurate, uncolored and balanced sound character will greatly increase your enjoyment of recorded music. We build JBL speakers with careful attention to detail, using only the highest quality materials.
"Speaker Level Input (from amplifier)" - Use these inputs when connecting to the speaker out (speaker mains) of your receiver/T.V./source amplifier. Run speaker wires from the speaker output terminals (usually coded red and black) on the rear of your receiver/T.
5 Speaker Level Output (to external speakers) + R + R L + L + L R Crossover Frequency Level Min Max 50 200 (Hz) Polarity Reverse Normal Speaker Level Input (from amplifier) Line Input PS Subwoofer L R + - + - Receiver, TV, or Amplifie L R FIG. 1: Line Level Input Connectio RCA Phono Cables PS manual[P].
6 Speaker Level Output (to external speakers) + R + R L + L + L R Crossover Frequency Level Min Max 50 200 (Hz) Polarity Reverse Normal Speaker Level Input (from amplifier) Line Input PS Subwoofer L R + - + - Receiver, TV, or Amplifie L R FIG. 2: Speaker Level Input Connecti Speaker Wire PS manual[P].
your receiver/T.V. / source amplifier to produce the low bass while passing the unaltered signal source to the external speakers. "Speaker Level Output (to external speakers)" - Hook up the external speakers using two- conductor insulated wire following the same procedure described under Speaker Level Input.
Speaker Level Output (to external speakers) + R + R L + L + L R Crossover Frequency Level Min Max 50 200 (Hz) Polarity Reverse Normal Speaker Level Input (from amplifier) Line Input PS Subwoofer L R - + + - Receiver, TV, or Amplifie L R FIG. 3: Speaker Level Output Connecti External Speakers + - - + Speaker Wire 8 PS manual[P].
9 begins to play. The LED turns green. After approximately 3 minutes of non-use (no signal being received), your PS subwoofer goes into the auto shut- off mode. The LED turns RED to signify this stand-by condition. AMBER - The LED turns amber briefly when the amplifier is in the protection mode.
Use the POLARITY switch to maintain proper acoustic summation with the main speakers. Listen to your PS subwoofer and main speakers with the switch on "Normal" then listen to the same material with the switch on "Reverse" . Decide which way sounds better and leave the switch in this position.
Specifications PS60 PS100 PS120 Amplifier Power (RMS)* 50 Watts 50 Watts 100 Watts Low Frequency 6-1/2" 10" 12" Voice Coil Diameter 1" 2" 2" Cone Material Polypropylene H.
P PO PS60 JBL Consumer Products, Inc. 240 Crossways Park West Woodbury, NY 11797 8500 Balboa Blvd. Northridge, CA 91329 800 645 7484 A Harman International Company Part No.
An important point after buying a device JBL PS120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL PS120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL PS120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL PS120 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL PS120 will certainly help you make a decision on the purchase.
If you already are a holder of JBL PS120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL PS120.
However, one of the most important roles played by the user manual is to help in solving problems with JBL PS120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL PS120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
