Instruction/ maintenance manual of the product P-Kit JBL
Go to page of 8
Au to mo tiv e L ou dsp ea ker s P - 4 3 2 , P - 5 3 2 , P - 6 3 2 , P - 9 6 3 2 , P - 9 6 3 3 , P - 3 3 2 , P - 6 4 3 2 , P - 7 5 3 2 , P - 2 3 t & P - K i t O w n e r ’ s M a n u a l G EN UIN .
02 Thank you for purchasing JBL's Power Series™ automotive loudspeakers. In order that we may better serve you should you require warranty service on your new speakers, please retain your original purchase receipt and return the enclosed warranty registration card.
03 Figure 3. Installation of the P-332, P-6432 and P-7532, as shown in Figure 1. Figure 1. Installation of the P-432, P-532, P-9632 and P-9633, as shown in Figures 2 and 3. Figure 2. Note: The P-332, P-6432 and P-7532 are designed as direct replacements for original-equipment speakers mounted behind factory grilles.
Using Intermount III™ in American and Japanese cars with openings for 6-1/2" speakers. Important: When using the steel mounting rings, you must make sure that the rings are mounted to a completely fl at surface. Using Intermount III™ in European and American 165mm openings or custom-mounting the speaker.
Remove the orange wire cover by inserting a small screwdriver into the notch between the two terminals and prying upwards. Disconnect the tweeter wires from the terminal.
06 Figure 6a. Figure 6b. Remove the top of the passive crossover by squeezing the sides and lifting off the top. Mount the crossover with screws or wire ties through the mounting holes. Connect the wires between the crossover, and between the woofer and tweeter as shown.
07 P-432 P-532 P-632 P-9632 P-9633 4" 2-Way or 5-1/4" 2-Way or 6-1/2" 2-Way or 6" x 9" 2-Way 6" x 9" 3-Way Component System Component System Component System Compone.
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 800-336-4JBL (4525) www.jbl.com Part No. POWSPKRSOM Made in China Declaration of Conformity We, JBL Europe A/S Kongevejen 194B DK-34.
An important point after buying a device JBL P-Kit (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL P-Kit yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL P-Kit - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL P-Kit you will learn all the available features of the product, as well as information on its operation. The information that you get JBL P-Kit will certainly help you make a decision on the purchase.
If you already are a holder of JBL P-Kit, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL P-Kit.
However, one of the most important roles played by the user manual is to help in solving problems with JBL P-Kit. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL P-Kit along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
