Instruction/ maintenance manual of the product IS8 JBL
Go to page of 8
IS5, IS6, IS8, IS6C, IS8C, IS6DT PERFORMANCE ™ INTEGRA T OR OWNER’S GUIDE ® Proformance Integrator OM 10/6/05 2:48 PM Page 3.
2 INCLUDED T emplate/paint shield. Remove paint shield (inner rectan- gle) at perfora- tion. One pair of speakers with grilles. T emplate/paint shield. Remove paint shield (inner circle) at perforation. One pair of speakers with grilles (IS6C and IS8C).
3 4 0 0 – 60 0 W ALL WALL W ALL 5 – 6 ft. WALL W ALL FRONT SPEAKERS MODELS IS5, IS6, IS8 AS REAR SPEAKERS MODEL IS6DT IN-CEILING The IS6DT has the capability of playing two channels through one speaker , thanks to its dual- tweeter/dual-voice-coil con - struction.
4 Phillips #2 screwdriver Measuring tape Utility knife Pencil Carpenter’ s level Aw l TOOLS NEEDED Performance Integrator in-wall loudspeakers are designed to be easily installed. However , if you are unsure of your ability to properly install these speakers, please contact your dealer or a qualified installer .
5 IS5, IS6, IS8 EXISTING CONSTRUCTION Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
6 IS6C , IS6DT , IS8C EXISTING CONSTRUCTION Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
NEW CONSTRUCTION P AINTING THE SPEAKER FRAME AND GRILLE Performance Integrator loud- speakers can be painted to match any décor . If you wish to change their color , the satin finish on the grille and frame will function as a primer coat.
2 Declaration of Conformity W e, Harman Consumer Group International 2, route de T ours 72500 Chateau du Loir France declare in own responsibility that the products described in this owner’ s manual.
An important point after buying a device JBL IS8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL IS8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL IS8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL IS8 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL IS8 will certainly help you make a decision on the purchase.
If you already are a holder of JBL IS8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL IS8.
However, one of the most important roles played by the user manual is to help in solving problems with JBL IS8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL IS8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
