Instruction/ maintenance manual of the product HTPS-400 JBL
Go to page of 8
X + 0 + Y 2 0 M HZ X + 0 + Y 2 0M HZ ” X + 0 + Y 2 THANK YOU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
2 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
3 UNP ACKING Feet Y our HTPS-400 subwoofer is equipped with 2 sets of feet for use depending on the type of surface the subwoofer will be placed on. Enclosed with this manual is a set of rubber self-adhesive feet for use on hard surfaces, such as wood or tile floors, and a set of spiked feet for use on carpeted surfaces.
4 HOOKUP Line-Level Inputs Subwoofer Out THX®-Certified Receiver/Pr ocessor OFF AUT O ON OUT IN 0 ° THX 180 ° NORMAL MIN. MAX. 50Hz 150Hz GREEN–ON RED–ST ANDBY LINE PHASE GAIN CROSSO VER EQ THX.
5 Normal Mode: Use this hookup for all non- THX processors, including Dolby* Digital, DTS ® , Dolby Pro Logic* or stereo. Note: If using Dolby Digital or DTS, set the crossover frequency knob fully clockwise to the maximum position. Make sure the THX/Normal switch is in the Normal position.
6 OPERA TION The HTPS-400 contains a signal-sensing auto turn-on/ turn-off circuit. This feature will automatically turn the subwoofer on when you turn your system on with the power switch in the “Auto” position and begin playing any program material.
TROUBLESHOOTING The Phase switch is used to adjust the relative polarity of the subwoofer to the other speakers. When the speakers are out of phase, the low- frequency sound waves will cancel each other out, reducing bass response.
JBL Consumer Products 250 Crossways Park Drive, Woodbury , NY 11797 85 00 Balboa Boulevard, Northridge, CA 913 29 800-336-4JBL (4525) (USA only) www.jbl.com © 2003 Harman International Industries, Incorporated. JBL is a registered trademark of Harman International Industries, Incorporated.
An important point after buying a device JBL HTPS-400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL HTPS-400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL HTPS-400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL HTPS-400 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL HTPS-400 will certainly help you make a decision on the purchase.
If you already are a holder of JBL HTPS-400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL HTPS-400.
However, one of the most important roles played by the user manual is to help in solving problems with JBL HTPS-400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL HTPS-400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
