Instruction/ maintenance manual of the product ATX20 JBL
Go to page of 10
X + 0 + Y 2 0M HZ OWNER’S GUIDE PRODUCT LINE: A TX20/30/40/60/10C/100S (230V) A TX Series DESIGN GOAL: Bring the thrill of live performance and movie sound to the home environment by calling on JBL ’s professional engineering leadership.
2 For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
3 near these heat-dissipation systems may possibly affect the long term reliability of both your amplifier and the objects placed above it. Do not place CDs, record jackets, owner’ s manuals or other paper on top of or beneath the unit or in between products containing amplifiers in a stack.
4 1.52 – 1.83m (5 – 6 ft.) 0 – 0.61m (0 – 2 ft.) Subwoofer Surround Speakers Front Speakers Center Channel Speaker SPEAKER PLACEMENT Placement A TX Series loudspeakers are designed to give very good per- formance in a wide variety of placements.
5 SUBWOOFER PLACEMENT & OPERA TION Subwoofer Start with the subwoofer as close to one of the front corners as possible to take advantage of solid-angle gains. If you get too much bass, adjust the ”VOLUME” towards ”MIN”. The result will be lower distor- tion and higher reliability .
6 OPERA TION With LFE Connection If you are using the LFE input, the subwoofer's CROSSOVER control is NOT active, because this function is controlled by your surround processor .
7 SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. Speakers and amplifiers/ receivers have corresponding (+) and (–) terminals.
8 LINE LEVEL If your receiver has a pair of stereo subwoofer outputs, con- nect interconnect cable from the receiver's left and right subwoofer outputs to the corre- sponding inputs marked LINE LEVEL IN L and R on the subwoofer .
9 Subwoofer Crossover Subwoofer Level V olume Subwoofer playback level can be adjusted using the rear panel V olume control. For detailed information on fine-tuning V olume and Crossover Frequency , see page 6. Crossover Frequency The crossover frequency knob determines the highest frequency your subwoofer will reproduce.
JBL Consumer Products 250 Crossways Park Drive, Woodbury , NY 11797 Europe: 2. Route de T ours, 72500 Château du Loir, France www.jbl.com ©2002 JBL, Incorporated.
An important point after buying a device JBL ATX20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL ATX20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL ATX20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL ATX20 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL ATX20 will certainly help you make a decision on the purchase.
If you already are a holder of JBL ATX20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL ATX20.
However, one of the most important roles played by the user manual is to help in solving problems with JBL ATX20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL ATX20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
