Instruction/ maintenance manual of the product 2.4G JBL
Go to page of 12
CONTROL ® 2.4G JBL ® ON AIR OWNER’S GUIDE ®.
2 Declaration of Conformity We, Harman Consumer Group International 2, route de T ours 72500 Ch â teau du Loir France declare in own responsibility that the product described in this owner ’ s manu.
READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
4 THANK YOU FOR CHOOSING JBL ® For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
5 NOTES: For the sake of simplicity, throughout this manual we have used the term “source” when describing connections and operation. This would apply to any device such as an A/V receiver , audio component, computer or portable music player . The JBL On Air Control 2.
6 Some computer sound cards feature preamp outputs in addition to or instead of speaker outputs. If your computer does feature preamp outputs, we recommend that they be used instead of speaker outputs. If you would like to connect the computer to the JBL On Air Control 2.
7 When connected properly , the top LED on the front of the active speaker should be green. When first plugged in, it will sometimes take several seconds for the Control 2.4G active speaker to initialize and “wake up.” Until then, the top LED will be in red.
8 Adjusting the V olume Application 1 Adding surround speakers to a home theater system: In this application, the output level of your Control 2.4G active speakers will not only be dependent on the vo.
9 Adjustable wall brackets are included for the two speakers and transmitter module. The included brackets are for wall-mounting only . It is not to be used for ceiling mounting. Ceiling mounting of the Control 2.4G transmitter and/or speakers is not recommended, regardless of bracket used.
10 Wall-Mounting the Speaker s Using Third-P arty Wall Brackets Each JBL On Air Control 2.4G wireless speaker contains a 1/4"-20 threaded insert on the back to facilitate the use of third-party wall brackets. Please consult your JBL dealer or distributor for recommendations.
S PECIFICA TIONS F requency Range (±3dB): 5 0Hz – 20kHz Amplifier Output: 15 Watts per channel Low-Frequency Driver: 4" (100mm) Magnetically shielded High-Frequency Driver: 1/2" (12mm) T itanium-laminate, magnetically shielded Operating Range: Up to 70' (21m) depending upon conditions RF Operating Frequency: 2.
JBL and Control Series are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Pro Sound Comes Home is a trademark of Harman International Industries, Incorporated. ® PRO SOUND COMES HOM E ™ Harman Consumer Group, Inc.
An important point after buying a device JBL 2.4G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL 2.4G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL 2.4G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL 2.4G you will learn all the available features of the product, as well as information on its operation. The information that you get JBL 2.4G will certainly help you make a decision on the purchase.
If you already are a holder of JBL 2.4G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL 2.4G.
However, one of the most important roles played by the user manual is to help in solving problems with JBL 2.4G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL 2.4G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
