Instruction/ maintenance manual of the product RM24993 Jasco
Go to page of 16
Universal Remote Instruction Manual RM24993 SA T D VD AUX CBL VCR TV ENTER INPUT.
2 Congratulations on your purchase of the RM24993 Universal Remote Control. The RM24993 is one of the most easy to use remote controls available today .
3 Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Y our remote automatically turns off if the buttons are depressed more than 30 seconds.
4 VOLUME UP/DOWN Changes the volume level of the product, normally the TV . MUTE T urns off the TV sound while the picture remains. OK Selects menu items for the device you are controlling. RECORD, PLA Y , STOP , REW , FF , P AUSE VCR control buttons operate your VCR even when the remote is set to operate the TV .
5 NUMBERS Enter numbers for direct channel selection. Some products require ENTER to be pressed after chan- nel selection. ON-OFF T urns device On or Off. CHANNEL Up/Down Changes the channels. Button F unctions, cont. Note: The REC button must be pressed TWICE to record from your VCR.
6 CHAN+ and CHAN- buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems. INFO button brings up Satellite Display screen for current Channel and system information. MENU brings up the Satellite Menu screen - use with the UP , DOWN , LEFT & RIGHT navigation buttons.
7 Direct Code Entry Write your codes down here for easy reference later . 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired mode button ( TV , VCR , etc.). The red indicator blinks, then stays lit.
8 Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the devic e ( TV , VCR , etc.) to be controlled.
9 Code Identication The Code Identication Feature allows you to identify the 4 digit library code stored under your device key . For example, if you want to nd out what 4 digit code is stored under your TV device key , follow the six steps below: 1.
10 Using Y our Remote SHIFT Press SHIFT (Setup) prior to the shifted key func- tion e.g., for , MENU - press and release SHIFT (Setup) then MENU (Info). UP - press and release SHIFT then UP (Chan+). DOWN - press and release SHIFT then DOWN (Chan-). LEFT - press and release SHIFT then LEFT (V ol-).
1 1 V olume/Mute Control and Punch- Through This remote lets you select which device Mode controls your V olume/Mute buttons. The remote is initially set for all device Modes to use their own V olume/Mute control if present.
12 Using Y our Remote, cont. Setting any Mode to use its own V olume/Mute Control This routine can set any Mode to use only its own V olume/Mute control. Note - If your chosen Mode has no V olume/Mute functions of its own then the V olume/Mute buttons will do nothing.
13 Using Y our Remote, cont. Sleep Function The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below . The remote must be in TV mode to set a Sleep T imer . This feature works even if your TV does not have a sleep feature.
14 Remote does not operate your product. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (Y ou might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product.
15 Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit.
Jasco Products Company 10 E. Memorial Road Oklahoma City , OK 731 14 Made in China RM24993-2/07 Universal Remote Instruction Manual RM24993.
An important point after buying a device Jasco RM24993 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jasco RM24993 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jasco RM24993 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jasco RM24993 you will learn all the available features of the product, as well as information on its operation. The information that you get Jasco RM24993 will certainly help you make a decision on the purchase.
If you already are a holder of Jasco RM24993, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jasco RM24993.
However, one of the most important roles played by the user manual is to help in solving problems with Jasco RM24993. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jasco RM24993 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
