Instruction/ maintenance manual of the product RM24930 Jasco
Go to page of 9
Universal Remote Instruction Manual RM24930.
3 2 Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries.
5 4 VOLUME UP/DOWN Changes the volume level of the product, normally the TV . 0-9 Enter numbers for direct channel selection. Some products require ENTER to be pressed after channel selection. ON-OFF Turns product On or Off. CHANNEL Up/Down Changes the channels.
7 6 Write your codes down here for easy reference later . Direct Code Entry 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired device button ( TV , VCR , etc.). The red indicator blinks, then stays lit.
9 8 Using Y our Remote Code Identification The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below: 1.
11 10 Using Y our Remote , cont. Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the ON•OFF button to turn the device off.
13 12 Using Y our Remote , cont. Setting any Mode to use its own V olume/Mute Control This routine can set any Mode to use only its own V olume/Mute control. Note - If your chosen Mode has no V olume/Mute functions of its own then the V olume/Mute buttons will do nothing.
15 14 Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit.
Jasco Products Company 31 1 N.W . 122nd Oklahoma City , OK 731 14 Made in China RM24930-02/05 Universal Remote Instruction Manual RM24930.
An important point after buying a device Jasco RM24930 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jasco RM24930 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jasco RM24930 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jasco RM24930 you will learn all the available features of the product, as well as information on its operation. The information that you get Jasco RM24930 will certainly help you make a decision on the purchase.
If you already are a holder of Jasco RM24930, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jasco RM24930.
However, one of the most important roles played by the user manual is to help in solving problems with Jasco RM24930. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jasco RM24930 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
