Instruction/ maintenance manual of the product RM24918 Jasco
Go to page of 16
Universal Remote Instruction Manual RM24918 RM84918.
2 Congratulations on your purchase of the RM24918 Universal Remote Control. The RM24918 is one of the most easy to use remote controls available today .
3 Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Y our remote automatically turns off if the buttons are depressed more than 30 seconds.
4 CODE SEARCH For setup. RECORD, PLA Y , STOP , REW , FF , P AUSE VCR control buttons operate your VCR even when the remote is set to operate the TV . Also operates DVD Scan -/+. Note the VCR keys also control DVD when in DVD Mode. INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.
5 VOLUME UP/DOWN Changes the volume level of the product, normally the TV . CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle. NUMBERS Enter numbers for direct channel selection. Some products require ENTER to be pressed after chan- nel selection.
6 This remote has several dedicated buttons used for DVD functions. The descriptions may vary from your original remote descriptions. SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively . SKIP (Channel Up & Down) buttons respectively locate the succeeding or preceding Chapters or T racks on a disc.
7 GUIDE/PROG button displays on-screen Satellite Channel Guide. CHANNEL+ and CHANNEL- buttons perform the “ Page+ ” and “ Page- ” function for on-screen Guide Menus used by some Satellite systems. INFO/DISPLA Y button brings up Satellite Display screen for current Channel and system informa- tion.
8 Direct Code Entry Write your codes down here for easy reference later . 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired mode button ( TV , VCR , etc.). The red indicator blinks, then stays lit.
9 Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device ( TV , VCR , etc.) to be controlled. 2.
10 Using Your Remote Code Identication TheCodeIdenticationFeatureallowsyouto identify the 4 digit library code stored under your devicekey .Forexample,ifyouwanttondout what 4 digit code is stored under your TV device key , follow the six steps below: 1.
1 1 Using Your Remote, cont. Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the POWER button to turn the device off. Controlling Combo Devices Some Combo devices (e.
12 V olume/Mute Control and Punch- Through This remote lets you select which device Mode controls your V olume/Mute buttons. The remote is initially set for all device Modes to use their own V olume/Mute control if present.
13 Using Your Remote, cont. Setting any Mode to use its own V olume/Mute Control This routine can set any Mode to use only its own V olume/Mute control. Note - If your chosen Mode has no V olume/Mute functions of its own then the V olume/Mute buttons will do nothing.
14 Remote does not operate your product. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (Y ou might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product.
15 Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit.
Jasco Products Company 31 1 N.W . 122nd Oklahoma City , OK 731 14 Made in China RM24918- Universal Remote Instruction Manual RM24918 RM84918.
An important point after buying a device Jasco RM24918 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jasco RM24918 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jasco RM24918 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jasco RM24918 you will learn all the available features of the product, as well as information on its operation. The information that you get Jasco RM24918 will certainly help you make a decision on the purchase.
If you already are a holder of Jasco RM24918, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jasco RM24918.
However, one of the most important roles played by the user manual is to help in solving problems with Jasco RM24918. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jasco RM24918 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
