Instruction/ maintenance manual of the product 19242 Jasco
Go to page of 9
Model 19242 www.jascoproduc ts.com Wire les s D oor Chi me K it Installation Ins tructions for B attery Ope rated Wireles s Door Chime Kit Prior to Installation the Try-Me feature must be removed. 1. Remove the battery cover on the chime. 2. Remove the white Styrofoam block 3.
Chim e (receiver) Push-Button (Transmitter). Chime Tune Setting The chime tune is set by adjusting the dip switch es located in the push button. The default setting is “Ding Dong” The following instructions explain how to change the tune on any wireless push button.
- Pushbutton Dip Switches and Jumpers Setting The House Security Code Each chime component has 4 jumpers for setting the house security code. In most cases you will not need to change the factory settings for the house security code.
back of the chime (See the chime components picture above). Remove the screw and take off the door. 4. Locate the chime and pushbutton jumpers shown below. Chime and Pushbutt on Jumpers 5. To change the house code, add or remove jumpers as needed. It is recommended to change only one jumper at a time and then test the system for proper operation.
Push Button Mounting Instructions Note: Avoid mounting on metal surfaces, as it may result in a reduced range of transmission. Do not mount in an area where exposed to direct rain.
Not farther than 150 feet Place push button where you would like to mount and test operation with the chime as close to it’s final location as possible. If it works, mount button here. If it does not work, see TROUBLESHOOTING. 3. Use back cover of push button as a template to mark two screw holes.
C hime U nit Mounting Instructions Note: Avoid mounting on metal surfaces, as it may result in a reduced range of transmission. 1. Select c hime m ounting location. 2. Use the supplied chime template to mark mounting holes. 3. Drill 5/32” holes at marked locations.
1. Slide power switch to “On” to turn on the chime. 2. Gently press transmitter button to sound chime. Troubleshooting Chime doesn't work: 1. Make sure push button switch is depressed and held for at least 1 second. 2. Make sure house c ode switches 1-4 on chime and push button match exactly.
or www.jascoproducts.com Made in China Hecho en China Distributed by: Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. www.jascoproducts.
An important point after buying a device Jasco 19242 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jasco 19242 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jasco 19242 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jasco 19242 you will learn all the available features of the product, as well as information on its operation. The information that you get Jasco 19242 will certainly help you make a decision on the purchase.
If you already are a holder of Jasco 19242, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jasco 19242.
However, one of the most important roles played by the user manual is to help in solving problems with Jasco 19242. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jasco 19242 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
