Instruction/ maintenance manual of the product J - 2 0 0 Jacuzzi
Go to page of 60
OWNER’S MANUAL J-200 ™ Series J - 280 J - 270 J - 230 J - 210 2530-277U Rev . C.
Attention New Spa Owner! Congratulations on the purchase of your new Jacuzzi ® spa! The following is a list of automated functions performed by your spa.
T able of Contents 1.0 Important Spa Owner Information .............................................. 1 2.0 FCC Notice ................................................................................... 1 3.0 Important Safety Instructions for all Spa Owners .
12.0 Spa Maintenance ....................................................................... 32 12.1 Cleaning The Filters..................................................................... 32 12.2 DrainingandRelling .....................
J-200 Series 1.0 Important Spa Owner Information Y our Jacuzzi ® J-200 series spa is constructed to the highest standards and is capable of providing many years of trouble-free use.
J-200 Series 3.0 Important Safety Instructions for all Spa Owners READ AND FOLLOW ALL INSTRUCTIONS CAREFULL Y! This spa was manufactured to meet the standards and specications outlined in the “Virginia Graeme Baker Pool and Spa Safety Act” (VGB Safety Act).
J-200 Series A grounding wire connector is provided on this unit to connect a • mi n im um No . 8 A WG ( 8. 4 mm²) s ol i d co p pe r c on du c to r b et we e n th i s un i t an d a ny me ta l e qu i pm en t , me t al e n cl os u re s o f el e ct ri c al e q ui pm e nt , me t al w a te r p ip e, or c o nd ui t w it h in 5 fe et (1 .
J-200 Series 6. ! W ARNING: RISK OF SEVERE INJUR Y OR DEA TH! Since excessive water temperatures have a high potential for causing • fet al dama ge dur ing the ea rly mon ths of pre gna ncy , if preg nan t o r pos sib ly p reg nan t, c ons ult you r p hys icia n b efo re u sin g a spa .
J-200 Series 9. CAUTION: TO DECREASE RISK OF PRODUCT DAMAGE. Maintain water chemistry in accordance with manufacturer ’s • instructions. Proper chemical maintenance of spa water is necessary to maintain • safe water and prevent possible damage to spa components.
J-200 Series 3.1 Entrapment Risk The Consumer Products Safety Commission/USA has reported that users of pools and spas have become entrapped (stuck) to drain and/or suction ttings causing death, drowning, or serious injury (see diagram below).
J-200 Series 3. ! DANGER: RISK OF SEVERE INJUR Y OR DROWNING! Body entrapment: May occur when part of the torso becomes entrapped, inserted or sucked into a suction or outlet opening. Never allow children to play or get near the suction ttings, suction • covers, lter , lter lid or skimmer assembly .
J-200 Series 3.3 Important CSA Safety Instructions (Canada Only) When using this electrical equipment, basic safety precautions should always be followed, including the following: 1.
J-200 Series 4.0 Choosing A Location IMPORT ANT : Because of the combined weight of the spa, water and users, it is extremely important that the base upon which the spa rests be smooth, at, level and capable of uniformly supporting this weight, without shifting or settling, for the entire time the spa is in place.
J-200 Series 4.1 Outdoor Location In selecting the ideal outdoor location for your spa, we suggest that you take into consideration: The proximity to changing area and shelter (especially in colder • weather). The pathway to and from your spa (this should be free of debris so • that dirt and leaves are not easily tracked into the spa).
J-200 Series In the unlikely event that you should ever need to access or gain entry to any portion of the spa for servicing, it is highly recommended that you plan your indoor installation to provide full access to the entire spa.
J-200 Series 5.0 General Electrical Safety Instructions Y our new Jacuzzi ® spa is equipped with a “state-of-the-art” equipment system. It contains the most advanced safety and self-protective equipment in the industry . Nonetheless, this spa must be installed properly to insure dependable usage.
J-200 Series 6.0 Power Requirements Jacuzzi ® spas are designed to provide optimum performance and exibility of use when connected to the maximum electrical service listed below . Minor circuit board modications can be performed to allow your new spa to accept an electrical service other than the factory operation setting.
J-200 Series 120V/15A† 240V/30A† 240V/40A.
J-200 Series Export J-210 and J-230 Models (50 Hz) 230V/20A* 230V/30A** Circuit Breaker: 20A* 30A** Number of Wires: 3 3 Frequency: 50 Hz 50 Hz Current Draw: 15A 21A * In 20A conguration, the heater will not operate while the jets pump is running in high speed.
J-200 Series 7.0 Electrical Wiring Instructions IMPORT ANT NOTICE: The electrical wiring of this spa must meet the requirements of the National Electrical Code/USA (NEC) and any applicable state or local codes. The electrical circuit must be installed by a qualied electrician and approved by a local building/electrical inspection authority .
J-200 Series Th en remove the four control box door screws and door (Figure B). 8. Select the power supply inlet you want to use (Figure A). Feed power cable to control box, then install it through the large opening provided in the bottom side of the box.
J-200 Series GRN WHT WHT BLK BLK BLK RED 1 2 3 Figure-C TB1 to Circuit Board Power In GRN WHT WHT BLK BLK BLK RED RED RED 1 2 3 Figure-D TB1 to Circuit Board Power In Move Red Wire Here .
J-200 Series 8.0 Spa Fill Up Procedure For best results, read each step in its entirety before proceeding with that step. 1. Prepare The Spa For Filling Clear all debris from the spa. (Although the spa shell has been • polished at the factory , you may want to treat it with a specially formulated spa cleaner .
J-200 Series W ARNING: RISK OF POISONING OR DEA TH. Never leave chemicals opened and accessible to anyone. Use chemicals according to the vendors instructions. Always store chemicals in a safe and/or locked location. Keep away from and out of reach of children.
J-200 Series 8. Place Cover On Spa Kee • ping the insulating cover in place anytime the spa is not in use will reduce the time required for heating, thereby minimizing operating costs. The time required for initial heat-up will vary depending on the • starting water temperature.
J-200 Series 10. Leave spa cover open during this step to allow excessive chemical vapors to exit spa, protecting pillows and plastic knobs from chemical attack.
J-200 Series W ARNING: RISK OF PERSONAL INJUR Y . T o decrease the risk of injury , entrapment or drowning, • never leave your hot tub unattended for any reason, especially if while the cover is open and accessible to small children and animals! T o decrease the risk of • contracting a waterborne illness (e.
J-200 Series 9.0 Control Functions 9.1 Control Panel A. LED Display: Can display current water temperature (de- fault display), water temperature set point, selected ltration/ heating mode, and error messages. B. Heat Indicator: Lit when heater is on.
J-200 Series 9.2 General Spa Features and Controls J-280 model illustrated - Jet locations and features will vary by model. 1 6b 2 11 3 3 3 4 11 5 8 3 4 4 4 10 6a 9 7 7 7 11 11 2 2 2 12 Control Panel 1. Headrest Pillows (4 ea.) 2. Air Controls (4 ea.) 3.
J-200 Series 10.0 Operating Instructions The spa control system has automatic functions that operate upon start-up and normal operation to protect the system. Upon power up, the readout displays the following information: 1. Control panel displays current software release (3.
J-200 Series 10.4 Optional Multi-Colored LED Light System Operation The multi-colored LED spa light offers seven constant color variations and three unique random modes for enhanced spa enjoyment.
J-200 Series 10.7 Air Controls Certain jet systems have their own air control. Each control introduces air into the water lines that supply that specic jet group. Simply turn the air control of choice counterclockwise to open or clockwise to close.
J-200 Series Economy ltration/heating modes (F4-F6) are typically selected by customers in warm climates where heat up times are minimized due to higher ambient temperatures.
J-200 Series Lock Modes (L1-L2) L1 Lock Out (disables all spa functions to permit lter cleaning) L2 Lock Mode (disables the jets and light buttons to prevent unauthorized use of spa). Filtration/heating cycle will continue to operate as programmed in this mode.
J-200 Series Lock Modes (L1-L2) L1 Lock Out (disables all spa functions to permit lter cleaning). L2 Lock Mode (disables the jets and light buttons to prevent unauthorized use of spa). Filtration/heating cycle will continue to operate as programmed in this mode.
J-200 Series 12.0 Spa Maintenance Proper and regular maintenance of your spa will help it retain its beauty and performance. Y our authorized Jacuzzi dealer can supply you with all the information, supplies, and accessory products you will need to accomplish this.
J-200 Series T o ensure optimum performance, clean and reuse the skimmer bag and lter cartridge once a month or as necessary , depending on use. J-210 models include lters on their footwell suction covers (shown right) that prevent debris from entering the pump and the massage selector(s), when operating.
J-200 Series E Lift unthreaded lter cartridge from skimmer well. F Rinse debris from lter cartridge pleats using a garden hose and high-pressure nozzle. Start at the top and work downward to the handle. Repeat until all pleats are clean Trapped Air Bubbles Cartridge G Submerge lter cartridge in spa.
J-200 Series About every 3 months, you will want to replace the spa’s water . The frequency depends on a number of variables including the amount of use, attention paid to water quality maintenance, etc.
J-200 Series 12.4 Cleaning The Spa Interior T o preserve the sheen of your spa’s surface, it is crucial that you avoid using abrasive cleaners or cleaners which have adverse chemical effect on the surface. If you are not certain as to the suitability of a particular cleanser , consult your authorized Jacuzzi dealer .
J-200 Series CAUTION: TURN OFF POWER TO HOT TUB! Follow the directions on page 3 5 for draining the spa. 1. As the water level drops below the seats, use whatever means necessary to get the water out of the recessed seating areas and into the foot well.
J-200 Series W ARNING: F AILURE TO MAINT AIN W A TER QUALITY CAN RESUL T IN: Increase risk of contracting a waterborne illness (e.g. an • infection bacteria or virus) and/or respiratory ailments . Damage the equipment, components and spa shell, which • are not covered under the hot tub’s warranty .
J-200 Series W ARNING: OR ENTRAPMENT! Never leave your hot tub unattended for any reason .
J-200 Series 14.3 Panel Displays ICE Freeze Protection - A potential freeze condition has been detected. No action is required. Jets pump (or optional circulation pump) and heater will operate to circulate and warm water through the plumbing until spa is out of DANGER.
J-200 Series V erify water level is 1" below lowest pillow . Add water if necessary . 1. Check for clogged or dirty lter cartridge (sec. 12.1, page 2.
J-200 Series In the event your Jacuzzi ® spa is not working the way it should, please rst review all the installation and operating instructions in this manual and check the message on the panel display .
J-200 Series 15.5 No Heat Check thermostat setting. 1. Keep the spa cover in place while heating. 2. Check the settings to see if your spa is in economy ltration/heating 3. mode (page 28 ). Should checking the above steps fail to correct the problem, please call your dealer so that they may arrange service.
J-200 Series 16.0 Circuit Board Diagrams This wiring diagram is used for all J-230, J-270 and J-280 240V 60 Hz North American spa models With or Without the Circulation Pump Option.
J-200 Series This wiring diagram is used for all J-210 120/240V 60 Hz North American convertible spa models.
J-200 Series This wiring diagram is used for all J-230, J-270 and J-280 230V 50 Hz Export spa models With or Without the Circulation Pump Option.
J-200 Series 16.4 Export 50 Hz J-210 Models This wiring diagram is used for all J-210 230V 50 Hz Export spa models. Standard 3-Wire 230 V AC Connection (50 Hz, 1 Phase Service) Use copper conductors ONL Y . Wire size must be appropriate per NEC and/or local codes.
J-200 Series 17.0 Optional Stereo Receiver Functions 1 8 9 10 11 12 13 14 15 16 17 2 3 4 5 6 7 T o start enjoying your new stereo receiver , please read the following operation instructions in their entirety .
J-200 Series automatically scan and store station presets, simply press and hold A/PS for several seconds, then release. 6. DISP Button: Press DISP to switch between clock and station frequency . When selected, the clock will display for 5 seconds then automatically revert back to station frequency .
J-200 Series 1 8 9 10 11 12 13 14 15 16 17 2 3 4 5 6 7 13. In tuner mode, any station can be stored as preset 4 by simply pressing and holding this button for several seconds. T o recall the station preset, simply press and release this button.
J-200 Series 19. Eject Button (Not Illustrated): T o eject CD, press OPEN and ip- down the front access panel, then press the Eject button located to the left of CD slot.
J-200 Series 24. A directory that does not include an MP3 le is skipped.
J-200 Series Example of a disc's folder/file hierarchy Folder File Level 1 Level 2 Level 3 Level 4 Level 5 Operation of the keys Press (T rack Down) to select folder down Press (T rack UP) to select folder up Press and hold to return 10 files behind.
J-200 Series ___________________________ Model Name: ___________________________ Dealer Name: ___________________________ Notes: _________________________.
J-200 Series 55.
J-200 Series 56.
An important point after buying a device Jacuzzi J - 2 0 0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jacuzzi J - 2 0 0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jacuzzi J - 2 0 0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jacuzzi J - 2 0 0 you will learn all the available features of the product, as well as information on its operation. The information that you get Jacuzzi J - 2 0 0 will certainly help you make a decision on the purchase.
If you already are a holder of Jacuzzi J - 2 0 0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jacuzzi J - 2 0 0.
However, one of the most important roles played by the user manual is to help in solving problems with Jacuzzi J - 2 0 0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jacuzzi J - 2 0 0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
