Instruction/ maintenance manual of the product Rack Conveyor Dishmachine Jackson
Go to page of 8
Changing Conveyor Direction 07610-003-04-72 A March 30, 2005 AJ-44 Rack Conveyor Dishmachine Maintenance Instructions.
The Jackson model AJ-44 series dishmachine has the ability to have its direction of travel changed from left to right, or from right to left. Direction of travel is determined by which end the rack of ware is put into the machine and which end the rack comes out.
a 7/16” combination wrench or 7/16” nutdriver will be required in order to hold the bolt head inside the control box. Remove the locknuts from the opposite bolts used to hold down the control box (do not remove the bolts) and secure the bracket to underside of the hood.
9. Remove the lower rinse arm support bracket, which is mounted directly opposite of the lower wash arm support bracket. 10. Remove the lower and upper rinse arms by unscrewing them and then gently pulling them out. 11. Behind the rinse manifold, remove the nut on the bracket.
16. On the drain plumbing, the rinse drain tube needs to be removed from the plumbing, as well as the wash drain tube. Both of these tubes are secured with hose clamps. Loosen the hose clamps and pull the tubes off. 17. The tee that the rinse drain nipple is in must be turned 180 B so that it is facing the opposite direction.
tor weldment. Once removed, set to the side along with its gasket. 22. Separate the rinse plumbing from the rest of the incoming plumbing by loosening the union. Ensure that the gasket on the bottom of the rinse injector stays with the assembly as you remove it.
Conveyor Switch Chart: The chart above lists the conveyor switches and their functions, depending on the direction fo travel for the machine. As you can see, when you change the direction of the conveyor, you must also alter the way the conveyor switches operate.
www.jacksonmsc.com AJ-44 Conveyor Direction Change Instructions Revision A (03/30/2005) 8 2. Work performed on Jackson dishmachines by unautho - rized or unqualified personnel may void the warranty.
An important point after buying a device Jackson Rack Conveyor Dishmachine (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jackson Rack Conveyor Dishmachine yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jackson Rack Conveyor Dishmachine - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jackson Rack Conveyor Dishmachine you will learn all the available features of the product, as well as information on its operation. The information that you get Jackson Rack Conveyor Dishmachine will certainly help you make a decision on the purchase.
If you already are a holder of Jackson Rack Conveyor Dishmachine, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jackson Rack Conveyor Dishmachine.
However, one of the most important roles played by the user manual is to help in solving problems with Jackson Rack Conveyor Dishmachine. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jackson Rack Conveyor Dishmachine along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
