Instruction/ maintenance manual of the product JFT Jackson
Go to page of 38
TECHNICAL MANUAL FOR JACKSON MODEL: JFT JFT -S JACKSON MSC LLC. P .O. BOX 1060 BARBOURVILLE, KY . 40906 PHONE: 1-606-523-9795 F AX: 1-606-523-9196 www .
ALL NEW JACKSON DISHW ASHERS ARE W ARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROM DEFECTS IN MA TERIAL OR WORKMANSHIP , UNDER NORMAL USE AND OPERA TION FOR A PERIOD OF (1) ONE YEAR FROM THE DA TE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DA TE OF SHIPMENT FROM THE F ACTORY .
3 ST OP! PA R E ! ARRET! CALL 1-88 8-800-5672 TO REGISTER THIS PRODUCT! F AILURE TO DO SO WILL VOID THE W A RRANTY! LL AM E AL 1-888-800- 5672 P AR A REGISTRAR ESTE P RODUCTO! AL NO HACERL O L A GARANTIA SERA ANUL ADA! S.
i REVISION/ P AGE REVISION DA TE MADE BY APPLICABLE ECN DET AILS C 04-30-04 CBW N/A Updated to new format; Added missing parts to steam booster assembly . D 12-16-04 MA W 7144, 7143 7145, 7156 Added new tall door assembly p arts. Added stop brackets to unloader stop assembly .
ii NOMENCLA TURE FOR THE MODELS COVERED IN THIS MANUAL JFT -S JFT - Electrically-heated rackless conveyor dishmachine JFT -S - S team-heated rackless conveyor dishmachine Model: Serial No.: Inst allation Date: Service Rep. Name: Phone No.: Jackson MSC LLC provides technical support for all of the dishmachines detailed in this manual.
T ABLE OF CONTENTS iii SECTION DESCRIPTION P AGE I. SPECIFICA TION INFORMA TION Performance/Capabilities of the JFT 2 Electrical Requirements of the JFT 3 Performance/Capabilities of the JFT -S 4 Elec.
T ABLE OF CONTENTS iv SECTION DESCRIPTION P AGE VI. P ARTS SECTION Final Rinse Arm Assembly 55 3/4” V acuum Breaker Repair Part s Kit/Air Gap Assemblies 56 Electrical Section Assembly 57 Electrical .
1 SECTION 1: SPECIFICA TION INFORMA TION.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 2 OPERA TING CAP ACITY (RACKS/HOUR) DISHES OR GLASSES PER HOUR (8.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 3 CONTROLS, MOTORS, & BLOWER DR YER SECTION RINSE TYPICAL HEA TER TOT AL E.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 4 PERFORMANCE/CAP ABILITIES OF THE JFT -S OPERA TING CAP ACITY (RACKS/HOUR) DISHES OR GLASSES PER HOUR (8.6 FPM) 17,101 DISHES OR GLASSES PER HOUR (6.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 5 W ASH/PREW ASH PUMP MOT OR (2) 3 HP POWER RINSE PUMP MOT OR (1) 2 HP FINAL RINSE PUMP MOTOR (1) 1/2 HP DRIVE MOTOR (1) 1/4 HP EXHAUST F AN MOTOR (1) 0.
Legend 1 - 1-1/2" NPT Machine Drain Connection (Floor drain - optional to either end) 2 - *Wash Tank Electrical Connection 3 - *Rinse Tank Electrical Connection 4 - *Booster Heater Electrical Con.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 7 3" [7 6mm] Minimum Floor Si nk or Floor Drain (Opti onal to drain at load or unload end of the m achine.
Contr ol Cabinet Door Open 7 6 4 5 2 3 1 3" [72mm] Minimum Floor Si nk or Floor Drai n (Opti onal to dr ain at load or unload end of the machi ne.
Legend 1 - 1- 1/2" N PT Mach ine D rain Connection (Floor drain - optional to either end) 2 - Electrical Connection - See Ta ble fo r Am p Dra w 3 - 3/ 4" NPT I ncom ing Wa ter Connection 4 .
Control Cabinet D oor Open 3" [72mm] Minimum Floor S ink or Floor Dr ain (Optional to drain at load or unload end of the machine.) PREWASH SECTION WASH SECTION POWER RINSE SECTION CONTROL CABINET.
Control C abinet Door Open 3 8 4 1 3" [72mm] Minimum Floor Si nk or Floor Drain (Optional t o drain at load or unload end of the machine.) Door In The Open Position 1 PREWASH SECTIO N WASH SECTIO.
12 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 13 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE NOTE: All JFT models are accompanied by a certified Jackson technician for the initial inst allation.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 14 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE (CONTINUED) CONNECTING THE DRAIN LINE: The drains for the models covered in this manu- al are gravity discharge drains.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 15 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE (CONTINUED) STEAM TRAP CONNECTIONS: There are steam traps provided on the discharge side of all steam heating devices.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 16 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE (CONTINUED) gram to see the order in which the provided washers, wheels, locknuts, and plate connectors are arranged for proper operation.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 17 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS DELIMING OPERA TIONS DELIMING OPERA TIONS: In order to maintain the dishmachine at it s optimum performance level, it will be required to remove lime and corrosion deposits on a frequent basis.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 18 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS DETERGENT CONTROL Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 19 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS OPERA TING INSTRUCTIONS Before the first st art up of the machine, check that all tools, cleaning rags, and all foreign part s are removed from the operation areas of the machine.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 20 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS OPERA TING INSTRUCTIONS (CONTINUED) DAIL Y MACHINE PREP ARA TION: Refer to the section entitled “PREP ARA TION” at the top of this page and follow the instruc- tions there.
21 SECTION 3: PREVENT A TIVE MAINTENANCE.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 22 PRE-SCRAPPING/STRAINERS Preventative maintenance should only be performed by authorized service personnel. If you have questions about who is authorized then please contact Jackson T echnical Service.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 23 DAIL Y/WEEKL Y/MONTHL Y MAINTENANCE Daily: 1. Drain and clean the dishmachine as per the cleaning instructions supplied with this manual.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 24 MONTHL Y (CONTINUED)/QUARTERL Y/ANNUAL MAINTENANCE found. Correct any deficiencies before returning the unit to an operating status. 5.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 25 ITEMS NOT REQUIRING MAINTENANCE Items that should not require maintenance: 1. Thermost ats - the thermostat s for your JFT machine are factory set so that your machine will operate in accordance with accepted regulatory parameters.
26 SECTION 4: TROUBLESHOOTING SECTION.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 27 W ARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel. Certain procedures in this section require electrical test s or measurements while power is applied to the machine.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 28 SECTION 4: TROUBLESHOOTING SECTION COMMON PROBLEMS W ARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel.
29 SECTION 5: SER VICE PROCEDURES.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 30 SECTION 5: SERVICE PROCEDURES V ACUUM BREAKER REP AIR P ARTS KIT These dishmachines are equipped with vacuum breakers to serve as back-flow prevention devices. ASSE requirements specify what type of back-flow prevention is nec- essary on dishmachines.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 31 SECTION 5: SERVICE PROCEDURES V ACUUM BREAKER REP AIR P ARTS KIT (CONTINUED) 6. Y our repair kit comes with a new plunger . Examine the old one and ensure that the mating surface is not damaged or cut.
An important point after buying a device Jackson JFT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jackson JFT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jackson JFT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jackson JFT you will learn all the available features of the product, as well as information on its operation. The information that you get Jackson JFT will certainly help you make a decision on the purchase.
If you already are a holder of Jackson JFT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jackson JFT.
However, one of the most important roles played by the user manual is to help in solving problems with Jackson JFT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jackson JFT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
