Instruction/ maintenance manual of the product Conveyor Dishmachines TS-66 Jackson
Go to page of 6
Per formance/Capacities Conveyor s TS -6 6 T raditional Series • 252 racks per hour hi-temp sanitizing rinse. • 0.7 4 gallons per rack hi-temp sanitizing rinse. • Incoming water pressure regulator • Standard 18” clearance. • T otally electro-mechanical; no solid state controls utilized.
Conveyors TS -6 6 T raditional Series Specifications NOTE: The TS-66 series conveyor dishmachines are N SF International Inc. (N SF) and Under writers Laboratories Inc.
Additional Standard Equipment: • Vent cowls/splash shields with 4” x 1 6” openings covered with removable plates for connection to exhaust ducts when required. • Flexible strip curt ains provided at the ends of the vent cowls as well as at the ends of the machine and separating the prewash, wash, power rinse, and final rinse sections.
Spe cifications Conveyors www .jacksonmsc.com 1-88 8-800-5 6 72 TS -6 6 T raditional Series Note: Chec k and/or copy all that apply . TS-66 Series Rack Conveyor Dishwasher — Item No. ____________ Shall be a Jackson T S-66 series, single t ank rack conveyor dishwasher .
TS -66 T raditional Series Left to Right Operation Shown Legend to Drawing A – Mac hine water inlet 1/2” I.P .S., 180°F minimum, 61- 1/4” above finished floor B – Electrical connection , approximately 61-1/4” above finished floor. See table for amperage requirements C – Drain connection-1 1/2” I.
TS -66 T raditional Series Right to Left Operation Shown 07610-002-9 7-65A 8/04 All specifications subject to change without notice. Recommended T able Fabrication 66” TABLE T O TABLE 8” 12-1/2” 4” 74” 82” 4” Floor sink or drain with 3” minimum drain line.
An important point after buying a device Jackson Conveyor Dishmachines TS-66 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jackson Conveyor Dishmachines TS-66 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jackson Conveyor Dishmachines TS-66 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jackson Conveyor Dishmachines TS-66 you will learn all the available features of the product, as well as information on its operation. The information that you get Jackson Conveyor Dishmachines TS-66 will certainly help you make a decision on the purchase.
If you already are a holder of Jackson Conveyor Dishmachines TS-66, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jackson Conveyor Dishmachines TS-66.
However, one of the most important roles played by the user manual is to help in solving problems with Jackson Conveyor Dishmachines TS-66. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jackson Conveyor Dishmachines TS-66 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
