Instruction/ maintenance manual of the product 7253 Ives
Go to page of 2
7253 Bottom Center Pi vot Improper pivot set installation can lead to personal injury or property damage . F ollow all instructions carefull y. For questions contact T echnical Support at 1-888-371-7331. CAUTION ! 1. Prepare and mortise bottom of door and floor to receive pivot set .
It is very important for installer to verify that center line of top pivot point lines up with center line of bottom pivot point before final installation. NOTE ! Pivot Base Door Leaf Radius of heel edge of door must not exceed pivot point to jamb distance C pivot and door L 5/8” 16 mm 1-3/16” 30 mm to Pivot center may be varied as needed .
An important point after buying a device Ives 7253 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ives 7253 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ives 7253 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ives 7253 you will learn all the available features of the product, as well as information on its operation. The information that you get Ives 7253 will certainly help you make a decision on the purchase.
If you already are a holder of Ives 7253, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ives 7253.
However, one of the most important roles played by the user manual is to help in solving problems with Ives 7253. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ives 7253 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
