Instruction/ maintenance manual of the product HTG79 Irox
Go to page of 10
HTG79 Operating Instructions Version 1.1.
Table of contents 1. Introduction Page x 2. Bedienelemente Seite x 2.1 LCD Anzeige Seite x 2.2 Tasten Seite x 3. Inbetriebnahme Seite x 4 . Funk-Thermometer Seite x 5. Bedienung 5.1 Zeit Seite x 5.2 Thermometer mit Alarm Seite x 5.2.1 Ablesen der Temperatur von jedem Kanal Seite x 5.
1. INTRODUCTION Many thanks for selecting the HTG79 from IROX. In your hands, you hold a high-quality thermo/hygrometer which we have equipped with additional functions t hat have above-average design and functi onalit y in a market comparison.
2.2 KEYS View from front CHANNEL / + (press briefly) - In normal operating mode: Changes from channel to channel ( --> 1 --> 2 --> 3 --> 4 --> 5 --> --> etc) - In the various sett.
3. PUTTING INTO OPERATION 1. Put all radio sensors that you want to use into operation and place these in close proximity (1-2 metre s) to the reception device. 2. Open the battery compartment of the display device and remove a ll insulation strips. If no batteries are in the device, insert the 2 batteries (UM-3 or ‘AA’ 1.
Signal interruptions Each sensor is read by the device once a minute. If more than 8 re adings are read one after the other without data, lines appear in the display for this channel and the HTG79 then st ops any othe r reception attempts after this for 8 hours.
5.2 THERMO/HYGROMETER WITH ALARM With regard to operation, the HTG79 is in a 'sleep mode’ when no k ey is pressed for more than 2 minutes. This status is then recognised by the fact that on the left-hand side of the display neither the symbol nor the number in the channel display is flashing.
5.2.4 Temperature and humidity alarm The alarm function is progra mmed individually per channel ( / CH1.... CH5). Each alarm is defined by an upper and lower limit of the temperature and/or the rel. humidity. If one of them is exc eeded or undercut, an acoustic and optical alarm is triggered.
5.2.5 Comfort Zone With each channel the comfort status will be displayed as per following chart: 6. CHANGE OF BATTERY : BATTERY CHANGE DISPLAY The batteries last for around 8-12 months. Dependi ng on the usage of the appliance and the batteri es used, this time can be slightly shorter or longer.
9. TECHNICAL DATA (DISPLAY UNIT) Temperature and humidi ty measurement Measurement range thermometer: Maximum range -50.0° C to +70.0° C (23. 0° F to 122.0° F) Internal sensor: -20°C to +50°C Measurement range hygrometer: Maximum range 1% to 99% r.
An important point after buying a device Irox HTG79 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Irox HTG79 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Irox HTG79 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Irox HTG79 you will learn all the available features of the product, as well as information on its operation. The information that you get Irox HTG79 will certainly help you make a decision on the purchase.
If you already are a holder of Irox HTG79, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Irox HTG79.
However, one of the most important roles played by the user manual is to help in solving problems with Irox HTG79. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Irox HTG79 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
