Instruction/ maintenance manual of the product 630 iRobot
Go to page of 19
500/600 Series Owner's Manual.
Dear iRobot Roomba Owner , Thank you for purchasing an iRobot Roomba vacuum cleaning robot. Y ou’ve joined the millions of people who clean with r obots - the smarter way to get it done. Please take a few moments to read this manual and get acquainted with your Roomba, to get the best performance from your r obot.
4 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 5 Important Tips Roomba contains electronic parts. DO NOT submerge Roomba or spray it with water . Clean with a dry cloth only . Before using Roomba the first time, you need to activate Roomba by removing the battery pull tab.
6 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 7 iRobot Roomba Anatomy Infrared Sensor Bin Release Button Power Supply Socket Flexible Brush Cliff Sensor Openings Edg.
8 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 9 Cleaning Modes Roomba will clean based on the cleaning mode you select. Roomba has three cleaning modes. Clean Mode (all models) Roomba automatically calculates the room size and adjusts its cleaning time appropriately .
10 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 11 Cleaning Bins Roomba is compatible with three inter changeable cleaning bins. Aero-V ac TM or Original V acuum Cleaning Bin The Aero-V ac or Original vacuum cleaning bin should be used for everyday cleaning.
12 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 13 CLEAN button light Battery status Solid red Battery empty Amber pulse Charging Solid green Fully charged Quick amber pulse 16-hour refr esh charge TIP: When Roomba is on the Home Base, always make sure that the Home Base power light is on.
14 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 15 Virtual W all ® Lighthouses ™ (optional accessory for selected models) Virtual W all Lighthouses tur n on and of f automatically as Roomba is turned on and off. When they are on, a light illuminates on the top of the Virtual W all Lighthouse.
16 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 17 Home Base ® (optional accessory for selected models) Always keep the Home base plugged in. Original Home Base When Roomba is on the Home Base, the power and docked lights are gr een to indicate Roomba is charging.
18 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 19 TIP: Check that there is a dir ect line of sight from the Remote Contr ol to Roomba and that the remote is pointed at Roomba. The Remote Control, Virtual W alls and Home Base operate using an invisible infrared beam.
20 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 21 Scheduling Roomba (Models 550 and above) Setting the Time Y ou must set the time before scheduling Roomba to clean. 1 Press and hold CLOCK. 2 While holding CLOCK, use the DA Y , HOUR, and MINUTE buttons to set the correct time.
22 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 23 Regular Maintenance T o keep Roomba running at peak performance, it is recommended that you perform the following maintenance regularly: TIP: Bin emptying and brush cleaning should be done after every cleaning cycle.
24 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 25 Clean Roomba’ s front wheel 1 Pull firmly on Roomba’ s fr ont wheel to remove it fr om the robot. 2 Remove debris fr om inside the front wheel cavity . 3 Remove the fr ont wheel from its housing and clear any hair wrapped around the axle.
26 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 27 T roubleshooting Roomba will tell you something is wrong with a two-tone “uh-oh” sound followed by a series of beeps or a narrated voice. The troubleshooting light will also blink.
28 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 29 Replaceable Modules Roomba has a number of modules that can be replaced, including its drive wheels, side brush, main cleaning head, vacuum bin, caster wheel, and battery .
30 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 31 3 Install Roomba’ s faceplate by inserting the tabs into the appropriate slots, and then pushing down firmly on the inside and outsides edges of the faceplate. 4 Reinsert Roomba’ s bin.
32 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 33 3 Unscrew the four scr ews shown below and remove Roomba’ s bottom cover . 4 Remove Roomba’ s battery . 5 Reinstall Roomba’ s battery with the iRobot logo facing up.
34 iRobot Roomba 500 Series For more detailed information, visit: www .irobot.com 35 Always exercise caution when operating your Roomba. T o reduce the risk of injury or damage, keep these safety prec.
© 2009-2010 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730. All rights r eserved. iRobot, Roomba, Virtual Wall and Home Base are r egistered trademarks of iRobot Corporation. Dirt Detect and Lighthouse are trademarks of iRobot Corporation. [00152.
An important point after buying a device iRobot 630 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought iRobot 630 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data iRobot 630 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, iRobot 630 you will learn all the available features of the product, as well as information on its operation. The information that you get iRobot 630 will certainly help you make a decision on the purchase.
If you already are a holder of iRobot 630, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime iRobot 630.
However, one of the most important roles played by the user manual is to help in solving problems with iRobot 630. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device iRobot 630 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
