Instruction/ maintenance manual of the product GWU647 IOGear
Go to page of 52
Installation Installation Guide Universal 5-Port Wi-Fi N Ether net Hub GWU647 P ART NO. M1200.
.
3 T able of Contents Package Contents 4 System Requirements 5 Product Overview 6 Installation 8 Installation without WPS - Windows XP 10 Installation without WPS - Windows Vista 16 Installation withou.
4 Package Contents • 1 X Universal 5-Port Wi-Fi N Ether net Hub • 1 X AC to USB Power Cable • 1 X AC to USB Power Adapter • 1 X Ethernet Cable • 1 X Quick Start Guide • 1.
5 System Requirements • Operating System - Windows XP , W indows Vista, Windows 7 - Mac OS X v10.4 and above • Wireless network with WPS setup • Wireless network without WPS setup and c.
WPS Reset PWR 5 1 2 3 4 6 Product Overview 2 3 1 4 1. WPS Button Push and hold the WPS button for 5~10 seconds to enable the WPS feature. 2. Ethernet Port The Ethernet port allows a LAN connection through Cat 5 cables. Supports auto-sensing at 10/100M speed, half/ full duplex.
7 LED Indicator State Description 1 2 3 4 1. LAN LED Flashing - Data is transmitting or receiving on the LAN interface. On - Port linked. Off – No link. 2. WPS LED Flashing - The WPS feature is enabled and in use. Off - The WPS featur e is not in use.
8 Installation Wireless Setup with WPS Step 1: Power on your Universal WiFi Hub using either of these methods: •ConnecttheACAdaptercabletoadevice.Make sure that the device wher e you connect the AC Adapter cable is powered on.
WPS Reset PWR 5 1 2 3 4 9 Step 1 Step 3 Step 2.
10 Installation without WPS - Windows XP Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer .
11 b. Next, right click on “Local Area Connection” and select “Properties” ..
12 c. Select “Internet Protocol (TCP/IP)” then select “Properties” . D. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section.
13 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “Site Survey” to scan for your wir eless network.
14 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A).
15 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it.
16 Installation without WPS - Windows Vista Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable cur - rently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your computer .
17 b. Under Network and Internet, click “View network status and tasks” ..
18 c. Under T asks in the left pane, click “Manage network connections” . d. Next, right click on “Local Area Connection” and click “Properties” .
19 e. Next, select “Internet Protocol V ersion 4 (TCP/IPv4)” and click “Properties”.
20 f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK.
21 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringupthecongurationutility .Click “ Site Survey ” to scan for your wireless network.
22 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A).
23 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it.
24 Installation without WPS - Windows 7 Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable cur - rently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your computer .
25 b. Under Network and Internet, click “View network status and tasks” ..
26 c. Under T asks in the left pane, click “Change Adapter Settings” . d. Next, right click on “Local Area Connection” and click “Properties” .
27 e. Next, select “Internet Protocol V ersion 4 (TCP/IPv4)” and click “Properties”.
28 f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK.
29 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “ Site Survey ” to scan for your wireless network.
30 Step 5: Select the AP you want to connect and enter the password if the network is secur ed. Click “Con- nect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A).
31 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it.
32 Installation without WPS - Mac Step 1: T urn off your computer’ s wireless con- nection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if ap- plicable). Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer .
33 b. Select your Ethernet connection in the left pane. NextchangeconguretoManualandenter IP address 192.168.1.100 and Subnet Mask 255.
34 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “ Site Survey ” to scan for your wireless network.
35 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not broadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A).
36 Step 6: Close your browser and change the network settings on your computer back to DHCP . Refer to steps 3a through 3b. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your device such as a Blu-Ray player , HDTV , or game colsole.
37 Manual Set Up If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A).
38 Step 2: Click “Next” Step 3: Enter your networks SSID and click “Next”.
39 Step 4: Enter your encryption information and click “Finished” Step 5: The Universal Wi-Fi Hub will now reboot..
40 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server addr ess automatically). Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer .
41 Firmware Upgrade Note: Ifarmwareupdateisavailable,itwillbe posted on iogear .com. Please check http://www .iogear .com/support/dm/ Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if applicable).
42 Step 5: Click “Browse” andlocatedyourrmwar ele,selectit,andclick “Open” ..
43 Step 6: Click “Upload” tostartthermwareupgradepr ocess..
44 Firmware update complete. W ait for the device to reboot before disconnecting..
45 Oncethedeviceisnishedrebooting,youwillseea statusscreen.Checkyoursettings.Afterarmwar e upgrade,theUniversalWiHubmayresetback to factory settings and need to be set up for your network again.
46 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful inter - ference in a r esidential setting.
47 This device has been tested and found to comply with the following European Union dir ectives: Electro- magnetic Capability (89/336/EMC), Low V oltage (73/23/EEC) and R&TTED (1999/5/EC).
48 The following contains information that relates to China. SJ/T 11364-2006 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉（Cd） 六价 (Cr(VI)) 多溴联苯 （PBB） 多溴二苯.
49 IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT .
50 IOGEAR 19641 Da Vinci Foothill Ranch, CA 92610 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2011 IOGEAR ® Part No. M1200 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation.
51.
© 2011 IOGEAR ® FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces.
An important point after buying a device IOGear GWU647 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IOGear GWU647 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IOGear GWU647 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IOGear GWU647 you will learn all the available features of the product, as well as information on its operation. The information that you get IOGear GWU647 will certainly help you make a decision on the purchase.
If you already are a holder of IOGear GWU647, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IOGear GWU647.
However, one of the most important roles played by the user manual is to help in solving problems with IOGear GWU647. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IOGear GWU647 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
