Instruction/ maintenance manual of the product GCS52U IOGear
Go to page of 24
MiniView ™ Micro USB 2-Port KVM Switch with Built-in KVM Cables Installation Manual ( GCS52U) ®.
©2003 IOGEAR. All Rights Reserved. PKG-M0073 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc.
Thank you for purchasing one of the most feature-rich keyboard, video, and mouse switches on the market. IOGEAR’s MiniView™ Micro switches are first-rate connectivity accessories designed to help reduce the frustration of managing multiple computer systems.
Package Contents Overview Features Requirements Introduction Installation Operation Appendix (HotKey) Specification Troubleshooting Tech Support Radio & TV Interference Statement Limited Warranty .
This package contains: 1 MiniView TM Micro USB 2-port KVM switch 1 User Manual 1 Quick Start Guide 1 Warranty Registration Card If any items are damaged or missing, please contact your dealer.
The MiniView™ Micro USB (GCS52U) KVM switch allows access to two USB computers from a single console (keyboard, monitor, and mouse). This cost-effective way to access two computers, without extra hardware, is highly efficient and easy to use.
- Use one keyboard, monitor and mouse to control two computers - Very compact KVM switch with molded cables for computer connections - Supports Microsoft IntelliMouse and the scrolling wheel on most m.
PS/2 connection USB port VGA connection Computers with a PS/2 mouse and keyboard connection, VGA connection, and an available USB port. Requirements 5.
4 5 12 3 6 4 5 Introduction 1. VGA port for the console monitor 2. PS/2 port for the console keyboard 3. PS/2 port for the console mouse 4. VGA connector to the computer 5.
1 2 3 Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro USB KVM. If you have never installed a USB mouse and Keyboard on your computer before you may need to leave your PS/2 mouse and keyboard attached during the first boot-up after installing the GCS52U.
34 4 5 Step. 2 5.Connect the USB cable (item# 5) that is built into the KVM cable of your MiniView™ Micro to the USB port on your computer. Installation 4.Connect the VGA cable (item# 4) that is built into the KVM cable of your MiniView™ Micro to the VGA port on your computer.
Step. 3 Repeat Step 2 for your second computer. Step. 4 Turn the power of your computers on. To switch between computers, tap the Scroll Lock key twice.
MiniView™ Micro allows you to access the computers through Hot Key combinations from the keyboard. 1. Selecting computers You can toggle between the two computers by pressing and releasing the Scroll Lock key twice: [Scroll Lock]+[Scroll Lock].
To initiate the AutoScan mode, press and release the left Shift key, then press and release the right Shift key: [Left Shift] + [Right Shift]. NOTE: The interval between these two keys should be no more than 0.5 seconds. Once the scanning begins, it continues until you press the [Space Bar] to exit AutoScan Mode.
You can customize the scan interval time with the following Hot Key combination: [Left Shift] + [Right Shift] + [S] + [ n ]. [ n ] represents a number from 1 to 4 which sets the desired scan interval .
y t i v i t c A n o i t c n u F f f O d e t c e l e s t o n s i t r o P ) y d a e t S ( n O r e t u p m o c e v i t c a n a o t d e t c e n n o c s i t r o P g n i h s a l F n i d e s s e c c a g n i .
Specification 14.
Specification Con’d 15.
Troubleshooting 16.
Troubleshooting Con’d 17.
If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear.com/support for the latest tips, tricks, and troubleshoot- ing. The IOGEAR T.I.L. was designed to provide you with the latest technical information about our products.
Radio & TV Interference Statement WARNING!!! This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMEN- TATION EXCEED THE PRICE PAID FOR THE PRODUCT.
Contact info. 23 Hubble • Irvine, CA 92618 • (P)949.453.8782 • (F)949.453.8785 • www.iogear.com ®.
An important point after buying a device IOGear GCS52U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IOGear GCS52U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IOGear GCS52U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IOGear GCS52U you will learn all the available features of the product, as well as information on its operation. The information that you get IOGear GCS52U will certainly help you make a decision on the purchase.
If you already are a holder of IOGear GCS52U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IOGear GCS52U.
However, one of the most important roles played by the user manual is to help in solving problems with IOGear GCS52U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IOGear GCS52U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
