Instruction/ maintenance manual of the product Digital Answering Machine Ameriphone
Go to page of 26
Operating Instructions EASY RECALL 5225-0849 1 3/01 ∆ M04600•d1 EASY RECALL ® For Loud & Cr ystal Clear V oice & TTY Messages. Digit al Answering Machine ©AMERIPHONE, Inc.
Important Safety Instructions When using your telephone equipment, always follow basic safety precautions to reduce the risk of fire, electric shock, and injur y to persons, including the following: 1. Read and understand all instructions. Obser ve all warnings and other markings on the product.
Contents Introducing the Easy Recall W arranty Ser vice ............................................................................................................... .2 Sales Receipt ..................................................................
Introducing the EASY RECALL Thank you for selecting the Easy Recall answering machine from Ameriphone. These Operating Instructions and the associated Quick Operating Guide provide you with the information you need to use your Easy Recall effectively and safely .
Features on the EASY RECALL AUDIO OUTPUT JA CK SPEAKER REC/ERASE button ON/OFF button # MESSA GE DISPLA Y NEXT button PREV button F AST FOR W ARD button F AST button VO L volume slider PLA Y/P AUSE bu.
Connecting Y our Easy Recall Answ ering Machine 1. First, for your safety , always disconnect the telephone line when installing or changing the batter y . 2. Optional - install a 9-volt batter y [not included] for back up. The batter y compar tment is located on the bottom of the unit.
6. If using a telephone, connect the telephone line cord into the jack labeled PHONE on the back of the Easy Recall and into the phone jack of the tele- phone. 7. When the Easy Recall is turned on, it will announce, ” The machine is on. “ Note: Y our Easy Recall answering machine has a maximum capacity of 24 messages or 14 minutes.
a message after the tone. “ • A factor y installed outgoing TTY message, “ LV MSG GA. “ • A factor y installed Remote Access Code [1 1 1 1] . T o change your Remote Access Code, use the included tem- plate, and then follow the directions in this manual.
Setting up Your EASY RECALL (continued) 4. The display window will show how much time you have remaining. 5. Press the ON/OFF key when you are through. 6. The Easy Recall will automatically replay your recorded message. 7. T o hear your current outgoing message, press PREV & FRWD .
Setting up Your EASY RECALL (continued) 8 6. Press the key marked SA Y to verify the time setting. 7. Press the EXIT key when you are finished. 8. T o review your settings, press F-RWD . NO TE : In the event of a power outage, the T ime and Date MA Y NEED RESETTING.
English T emplate for the Easy Recall’ s k eys Setting up Your EASY RECALL (continued) 9.
English T emplate for the Easy Recall ’ s k eys (cont.) Setting up Your EASY RECALL (continued) 10.
2. T o delete a message, press the REC/ERASE key while playing the message to be deleted. Note: Unless deleted, individual messages will automatically be SA VED. 3. Press PREV key to replay the message you ’ ve just heard. Press PREV repeatedly to search for other previous messages.
Using Your EASY RECALL (Continued) 4. Use the TONE and VOLUME slide controls to adjust for optimum hearing clarity . 5. T o listen to the next message, press the NEXT key . 6. T o skip ahead within the message in 1 – 2 second increments, press the F FWD [Fast For ward] key .
Setting Y our 4-Digit Access Code for Remote Retrie val of Y our Messag es Y our Easy Recall comes with a factor y set access code of 1 1 1 1. T o program a personal access code, make sure the answering machine is ON and follow these instructions: 1. Fit the Access Code T emplate over the Easy Recall ’ s keys.
Using Your EASY RECALL (Continued) Y ou can ’ t use 0 when program- ming your 4 digit code. Use the keys labeled 1st , 2nd , 3rd and 4th to select each of the four-digit numbers for your personal access code. 4. Press the SA Y key to verify your access code.
3. The current telephone conversa- tion will now be recorded. 4. Press the ON/OFF key to end the recording. 5. The recorded conversation will be stored in the machine ’ s memor y where it can be reviewed or erased like any other voice message.
Recording a Memo [maxim um recor ding time – 2 minutes per memo] Y ou can record a memo when you want to leave a personal message for someone in your household. Memo messages will be registered on the display panel and replayed just like incoming voice messages.
Reading Y our TTY Messa ges • The TTY must be in acoustic mode, NOT direct connected, to work properly . • The number blinking after the flashing td in the display window indicates the number of TTY messages that have been received. • When using the Dialogue Q90, you must use the cable included with the Q90 with an optional adapter .
• Set both V olume and T one controls to mid-range. Adjust according to need. • If you have ONL Y TTY messages, press PLA Y . If you have both voice and TTY messages but you only want to play the TTY messages, press SLOW . • The # of messages from the answering machine will appear on your TTY ’ s screen.
Master Clear 1. Press REC/ERASE , F-RWD and ON/OFF keys simultaneously [using both hands if necessar y], then release all keys at the same time. “ Master Clear ” will be said by machine. This will: • Clear all personalized outgoing messages and returns to the unit ’ s factor y default outgoing messages.
Input P o wer 15VDC / 400 mA Optional 9-volt alkaline battery [back up] Approx. 1 1/2 hours Maximum r ecording capacity Max. of 14 minutes or 24 messages, whichever comes first. Limit of up to 2 minutes per message. Pre-r ecorded outgoing messa ges V oice and TTY Maximum outgoing messa ge length Approx.
T roub leshooting Char t SOLUTION Reset the unit by unplugging the AC adapter and removing the batteries for 10 – 20 seconds before re-installing them and plugging the AC adapter back in. Make sure the unit is plugged in and turned ON. Reset the unit as indicated above.
The Easy Recall answering machine has been registered with the Federal Communications Commission (FCC) and complies with the standards in Part 68 of the FCC Rules.
states do not allow limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above exclusions or limitations may not apply to you.
Connecting the Easy Recall ..........4 Features ....................................3 Recording your personal outgoing voice message ...........................6 Recording a telephone conversation ..............................15 Recording a memo ....
An important point after buying a device Ameriphone Digital Answering Machine (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ameriphone Digital Answering Machine yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ameriphone Digital Answering Machine - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ameriphone Digital Answering Machine you will learn all the available features of the product, as well as information on its operation. The information that you get Ameriphone Digital Answering Machine will certainly help you make a decision on the purchase.
If you already are a holder of Ameriphone Digital Answering Machine, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ameriphone Digital Answering Machine.
However, one of the most important roles played by the user manual is to help in solving problems with Ameriphone Digital Answering Machine. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ameriphone Digital Answering Machine along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
