Instruction/ maintenance manual of the product ID204 Interquartz
Go to page of 26
Doorphone – ID 201 Doorphone – ID 202 Doorphone – ID 204 User manual INTERQUARTZ.
Conten ts 1 BASIC DESCRIPTION ......... .......... ......... ......... .......... ......... .......... ......... ......... ... 3 1.1 F EATURES ......... .......... ......... ......... .......... ......... ......... .......... ......... .......... ....
8 DRILLING MAST ER BOARD ..... ......... .......... ......... ......... .......... ......... .......... . 27 1 Basic descript ion 1.1 Features Very slim module for surfac e mounting o nly. S upplied in 1, 2 or 4 button variants. Voice comm unication powered fr om analogue telephon e line only.
1.2 DoorPhone models Three versions are available : ID 201 -1 butt on ID 202 - 2 bu ttons ID 204 - 4 buttons 2 Installation This com pact unit is fixed by 2 scre ws to the wall. 2.1 Opening, wiring, wall mounting and settings 2.1.1 Name card pane l 1.
2.1.2 Uncover cont rol eleme nts 4. Push the aluminium s peaker grille down (see figure – 4). 2.1.3 Wiring and wall mounti ng 5. Use the wall mounting template at the end of the manual to m ark the position for the scr ew holes an d cable connection o n the mounting surf ace.
(central) and " NC " means contact normally c losed. T he relay contact is isolated fr om the other c ircuits on th e boar d. For t he v ariants of lock connection see th e picture belo w.
The PCB heating has two m ajor benefits. Firstl y, it warm s the board during winter tim e (temperatures under -20 C, most circuits have warrant y operation down to - 20 C) and secondly it helps to protect the PCB ag ainst humidity when ins talled outs ide.
2.2 Location of ID Doorphone components All mounting, control and setting elem ents are located under the speak er front aluminium grille. . PC connec tor SlimDoorPhone fixing screw hole Service switc.
2.3 Changing name cards Name car d panel (2.1.1on page 4) h as spaces to insert printed nam e cards. Insert nam e cards from top (s ee picture). Cards c an easily be printed with pictures as well as text using the included software. The card outline is marked for easy cutting .
3 Doorphon e Services 3.1 Signalling Overview The unit s ignals acoustic c onditions tha t m ay occur du ring operat ion. You can listen to the sig nalling sam ples in the ID Manag er program.
from the second group ( p arameter 2 ). The next pr ess of the same button again selects the num ber from the firs t group, etc..…… If the button is pressed af ter the line has been opened (but before the call is ans wered), the unit will hang up for the per iod given by paramet er 54, lift up the line and dia l the other group number.
4 Parameter progra mming 4.1 Programming from a telephone by DT MF 4.1.1 Entering progra mming mode The SlimDoorPhone ma y be set to programm ing mode in two w ays: 1. by passw ord – d ial the unit‘s num ber (eit her extension number, if connected to a PBX or telephone number, if co nnected to a PSTN line) .
Note 1 . i f you wish to maintain the connection in programming mode (i.e. ex tend the 34 seconds pe riod) then it is necessary to o ccasionally press a key (e.g. * , # or 7). The unit will respond with an error tone but the connection will be kept alive.
5 Parameter descr iption 5.1 Direct Dialling – Memories Parameter Value Description Default Exam.1 Exam.2 1 t nn… No. nn under button t - - - t – Button num ber (memor y) [1-4] nn – te lephone number up to 16 di gits to be stor ed. Refer to the table for ot her choices.
Parameter Value Description Default Exam .1 Exam.2 32 hhhhhh External access code in DAY + NIGHT mode - 1212 1324 33 hhhhhh External access code in DAY mode - 2211 2211 34 hhhhhh External access code .
Parameter Value Description Default Exam .1 Exam.2 38 cc Internal access code 2 impulses 66 66 66 cc – comm and from phone to rel ay closing [2 digits] – 2 impulses Parameter Value Description Default Exam.
Parameter Value Description Default Exam.1 Exam.2 44 xxxx Password 0000 0000 0000 xxxx – s ervice password for entry to programm ing Parameter Value Description Default Exam.
Parameter Value Description Def ault Exam.1 Exam.2 53 w time between button presses 2 2 2 w – m ax. time [sec ] between button presses [range 1-9] - re lay clo sing – if time bet ween t wo next press es is bigger than w time, the code is n ot evaluated corr ectly.
Parameter Value Description Def ault Exam.1 Exam.2 57 t DTMF tone duration (ms) 5 (100ms ) 5 (100ms ) 5 (100ms ) 58 m Space duration between DTMF tones (ms) 5 (100ms ) 5 (100ms ) 5 (100ms ) 59 f Recal.
Parameter Value Description Def ault Exam.1 Exam.2 5*2 y Frequency of tone detection 4 4 4 y – s etting range frequency of tone detection from telephone line, value is in next table: y frequency ran.
Parameter Value Description Def ault Exam.1 Exam.2 81 Deletes all numbers in group 1 (Day mode) 82 Deletes all numbers in group 2 (Night mode) 83 Default setting only for parameters 3x only 3.. 84 Default setting only for parameters 4x only 4.. 85 Default setting only for parameters 5x only 5.
Parametr Value Descript ion Default Exam.1 Exam.2 6 z Acoustic signalling 3 and 9 3 and 9 3 and 9 In default the un it produces acoustic signals. It can occas ionally cause a problem of incorrect detection of tones b y PBX. By changing param eter „ z“ you can s witc h off this acoustic s ignalization.
36 ss Relay closing time 05 02 05 37 pp Time between 2 impulses 05 05 05 38 cc Internal access code 2 impulses 66 66 66 39 hhh hhh External access code in DAY + NIGHT mode for 2 impulses - - - 41 v Di.
6 * t Delay of line connection (Siemens PBX) 1 1 1 6 z Acoustic signalling 3 and 9 3 an d 9 3 and 9 8# # Default setting executes 8# 1 Setting per exam. 1 executes 8# 2 Setting per exam. 2 executes 81 Deletes all numbers in group 1 (Day mode) 82 Deletes all numbers in group 2 (Night mode) 83 Default setting only for parameters 3x only 3.
switches and heat ing Max. consum ption of lighting through and heat ing 300mA 12V Max. voltage of s witch contac t 48V at I < 1A Max. current of switch contact 2A at U < 30 V Operational tem perature - 20 to + 50° C 6.
Relay closing time [sec] 36 2 Time between 2 impulses [sec] 37 2 Internal access code 2 impulses 38 2 External access code 2 impulses Day+Night 39 6 Dialling type 1 / 0 41 1 Prolong call * / # 42 1 End call 43 2 Password 44 4 DAY MODE switching 45 2 NIGHT MODE switching 46 2 Dialling mode 1 / 0 47 1 No.
An important point after buying a device Interquartz ID204 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Interquartz ID204 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Interquartz ID204 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Interquartz ID204 you will learn all the available features of the product, as well as information on its operation. The information that you get Interquartz ID204 will certainly help you make a decision on the purchase.
If you already are a holder of Interquartz ID204, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Interquartz ID204.
However, one of the most important roles played by the user manual is to help in solving problems with Interquartz ID204. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Interquartz ID204 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
