Instruction/ maintenance manual of the product PB22 Intermec
Go to page of 104
PB 22 | PB 32 Mobile Label and R eceipt Printer User ’ s Guide.
ii PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Intermec T echnologies Cor poration W orldwide Headquarters 6001 36th Ave.W . Everett, W A 98203 U.
PB22 and PB32 Mobile Label and Receipt Printer User’s Guide iii Document Change Record This page records changes to this document. The document was originally released as Revision 001. Ve rs i o n Number Date Description of Change 004 5/2011 Revised batter y information.
iv PB22 and PB32 Mobile Label and Receipt Printer User’s Guide.
Contents PB22 and PB32 Mobile Label and Receipt Printer User’s Guide v Contents Before Y ou Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Safety Information .
Contents vi PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide Printing a T est Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 2 Configuring the PB22 and PB32 .
Contents PB22 and PB32 Mobile Label and Receipt Printer User’s Guide vii Cleaning the Printer Media Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 A Specifica tions . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents viii PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide.
Before You Begin PB22 and PB32 Mobile Label and Receipt Printer User’s Guide ix Before Y ou Begin This section provides you with safe ty inf ormation, technical support information, and sources f o r additional product inf ormation. Safet y Inform ation Y our safety is extremely important.
Before You Begin x PB22 and PB32 Mobile Label an d Receipt Printer User’s Guide Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product.
Before You Begin PB22 and PB32 Mobile Label and Receipt Printer User’s Guide xi Related Documents This is a list of related Intermec documents. • Intermec Fingerprint Command Refer ence Manual •.
Before You Begin xii PB22 and PB32 Mobile Label and Receipt Pr inter User’s Guide.
1 1 Using the PB22 and PB32 Mobile Label and R eceipt Printer Use this chapter to familiarize yourself with the PB22 and PB32 mobile label and receipt printer.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 2 PB22 and PB32 Mobile Label an d Receipt Printer User’s Guide Introducing the PB22 and PB32 Mobile Label and Receipt Printer T.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 3 Identifying the Par ts of the Printer Use this illustration to familiarize yourself with some of the features of the printer.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 4 PB22 and PB32 Mobile Label an d Receipt Printer User’s Guide Understanding the Control Panel The printer control panel contains four buttons, a liquid cryst al display (LCD), and one LED indica tor.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 5 All of the buttons can act as “soft keys,” which means that the function of each button depends on the state of the printer.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 6 P B22 and PB32 Mobile Label an d Receipt Printer User’s Guide There is only one LED on the printer: the R eady-to- W ork ™ indicator .
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 7 The current f irmware type and version display on the printer screen when the printer is in Ready mode.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 8 PB22 and PB32 Mobile Label an d Receipt Printer User’s Guide T o change the printer language using IPL and a communications program 1 Connect your printer to your PC using a serial cable.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 9 c T urn the printer on. T o change the printer language using the display and IPL 1 Press the Setup button. The Setup menu system appears.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 10 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Understanding the Printer Sounds The printer plays sounds in response to several actions that you can take with the printer.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 11 Using the Batteries The printer uses a rechargeable 7 .4 V 2300 (typical) mAh lithium-ion batter y (Model AB27) for po wer.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 12 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Installing the Batter y Make sure you fully charge the battery before you use your printer . Y ou can charge the batter y before or after you install it into the printer .
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 13 Charging the Batteries There are two ways to charge the printer battery: • Charge the batter y in the AC18 4-bay battery charger.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 14 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Extending Batter y Life Here are some tips for extending the overall lif e of your battery : • Never expose the battery to direct sunlight or temperatures over 50°C (122°F).
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 15 Loading Media Y ou can use roll or fanfold receipt media with the printer . The PB22 and PB32 ship with a test page printed to verify that the printer works.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 16 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 2 If necessar y , unlock the media support lock before sliding the two media supports apart. 3 Insert a roll of media and close the media suppor ts so the roll is held f irmly in place.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 17 6 Close the media cover until it latches. 7 Press the Fe e d button to advance the media. T o load media for self -strip printing 1 Complete Steps 1 through 4 in the previous procedure.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 18 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 4 Feed the label liner over the self-strip bar and out the back of the self-strip door. 5 Close the media cover until it latches and press down on the self-strip door to make sure it locks.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 19 Printing on Floodcoated Media If you are using color ed media, also kno wn as f loodcoated media, you may need to adjust the s ettings to enable better printing.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 20 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Understanding the Display Modes The printer has six displa y modes to help you effectively interact with the printer: Ready, Information, Pause, Setup, Error, and T est.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 21 Understanding Pause Mode Use Pause mode to momentarily stop printing or to cancel a current print job. Once yo u pause the printer , the Pause mode screen appears.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 22 PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide Once you enter Setup mode, there are two editing modes: normal and enhanced. Normal Editing Mode: In normal editing mode, you see an up arrow and a right arrow f or making selections.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 23 Understanding Error Mode The printer enters Error mode when it detects an error condition such as a low battery or a paper fault.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 24 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 4 Press Feed to exit Dump mode. After you exit Dump mode, the printer re turns to Ready mode. For more information on Dump mod e, see “ Troubleshooting Communication Problems” on page 60 .
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 25 Changing Configuration Settings From the Display Y ou need to enter Setup mode befo re you can change conf iguration settings.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 26 PB22 and PB32 Mobile Label and Receipt Pr inter User’s Guide The Main Levels of the Setup Menu in IPL ESC/P supports six typ.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 27 4 Press to enter the T estprint Conf ig menu. 5 Press to enter the Config menu. 6 Press to choose a testprint. 7 Press to print the Conf ig testprint of your choice.
Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer 28 PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide.
29 2 Configuring the PB22 and PB32 In this chapter you will f ind these sections: • Connecting the Printer to Y our PC • Connecting the Printer to Y our Network • Conf iguring the Printer Settin.
Chapter 2 — Configuring the PB22 and PB32 30 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Connecting the Printer to Y our PC Y ou can easily connect to the printe r to your PC using.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 31 8 On the Hardware Installation warning screen, click Continue Anyway . 9 Click Finish to exit the New Hardware Wizard. InterDr iver files are now installed on your computer .
Chapter 2 — Configuring the PB22 and PB32 32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 7 PrintSet attempts to connect to your printer . If it cannot find your printer, click Back to review th e communication se ttings, then try again.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 33 • For Fingerprint, type : FF and press Enter . • For ESC/P , press the ESC key an d t ype : EZ {AHEAD:10} The printer responds by feeding a small amount of media.
Chapter 2 — Configuring the PB22 and PB32 34 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide T o set up Bluetooth communications with a mobile computer • Follow the procedure to discover and connect to Bluetoo th devices in your mobile computer user’s manual.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 35 The printer supports these authentication modes: none, WEP, WP A Personal and Enterprise mode (802.1x authentication), WP A2 Personal and Enterprise mode (802.
Chapter 2 — Configuring the PB22 and PB32 36 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 6 Typ e t he SSID (Network Na me) . For peer-to-peer access points, select This is an ad hoc network and select the Channel you want to use. The channel setting must be the same on all wireless devices on the ad-hoc netw ork.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 37 <STX><SI>wt,WPA_PSK<ETX> <STX><SI>wt,ROAM<ETX> <STX&.
Chapter 2 — Configuring the PB22 and PB32 38 PB22 and PB32 Mobile Label and Receipt Pr inter User’s Guide Use the following sections to set most of your wireless communication settings. For help with additional commands and information, see either the Intermec Fingerprint Developer's Guide or the IPL Developer’s Guide .
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 39 where xxxxxxxxxx is a value between 8 and 64 characters.
Chapter 2 — Configuring the PB22 and PB32 40 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide <STX><SI>ws,CA_CERT, c:/testCA.pfx @ export <ETX> <STX><SI>ws,VALIDATE,ON<ETX> where c:/testCA.pfx is the location and name of the certif icate and export is the pa ssphrase.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 41 2 Send the following commands to configure the WEP keys. The following exam ple sets WEP key 1 to 1234 and enables WEP key 1. setup "wlan","WEP1","0x0001020304" setup "wlan",".
Chapter 2 — Configuring the PB22 and PB32 42 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 4 Send these commands to conf igure the EAP_T YPE: setup "8021x","EAP_TYPE"," xxxx " where xxxx can be OFF, LEAP , PEAP, or TTLS.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 43 • the display . • the host PC using PrintSet. • the host PC using the command line. • the printer home page. • SmartSystems TM Foundation.
Chapter 2 — Configuring the PB22 and PB32 44 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Changing Configuration Settings From the Printer Home Page If you are have a printer with an 802.11 wireless radio, you can change conf iguration settings from the home page of the printer.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 45 Changing Configuration Settings Using SmartSystems Foundation Y ou can use the Smar tSystems console to change conf iguration settings on your printer.
Chapter 2 — Configuring the PB22 and PB32 46 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 2 Connect your printer to your printe r using a serial cable. For help, see “Connecting the Printer Through the Serial Por t” on page 31 .
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 47 4 Open PrintSet. The Intermec PrintSet dialog box appears. 5 Under My Printers, click the printer whose f irmware you want to upgrade. 6 Under Printer T asks in the right-hand column, click Firmware Wizard .
Chapter 2 — Configuring the PB22 and PB32 48 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide T o upgrade using the printer home page 1 Establish a connection between your printer and the ne twork. Fo r help, see “Setting Up 802.11 Radio Communications” on page 34 .
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 49 6 In the address f ield type the IP address of your printer and press Enter.
Chapter 2 — Configuring the PB22 and PB32 50 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 7 Click Maintenance . The Maintenance page appears. 8 When prompted, enter your user name and passw ord. 9 Browse to the (.bin) file you wa nt to upgrade to and select it.
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 51 Upgrading the Printer Firmware Using a Communications Program Y ou can upgrade your printer f irmware using a communications program like HyperT erminal and a pr inter running either the IPL, Fingerprint or ESC/P printer language.
Chapter 2 — Configuring the PB22 and PB32 52 PB22 and PB32 Mobile Label and Receipt Pr inter User’s Guide 6 Typ e : su -p pass admin. 7 Typ e : dlk -z The printer’s display will read “Upgrading”. 8 In the communications program window , click Tra n sf er > Send File .
Chapter 2 — Configuring the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 53 run “dlk -z” The printer’s display will read “Upgrading”. 6 In the communications program window , click Tr an sf e r > Send File .
Chapter 2 — Configuring the PB22 and PB32 54 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 7 Typ e dlk -z. The printer’s display will read “Upgrading”. 8 In the communications program window , click Tr an sf e r > Send File .
55 3 T roubleshooting and Maintaining the PB22 and PB32 Use this chapter to solve problems you may encounter while using the PB22 and PB32. This ch apter contains the following sections.
Chapter 3 — Troubleshooting and Maintaining the PB22 an d PB32 56 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide T roubleshooting the Printer Y ou may have printer operation, print quality , or printer communication problems at some time during the life of the printer printer .
Chapter 3 — Troubleshooting and Maintaining the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 57 Possible Printer Error Icons and Messages Error Ic on Error Message Description Pause The print job is paused. Paper out (IPL) Out of Paper (Fingerprint ) The printer is out of pap er .
Chapter 3 — Troubleshooting and Maintaining the PB22 an d PB32 58 PB22 and PB32 Mobile Label and Receipt Pr inter User’s Guide T roubleshooting Printer Problems and Finding Solutions Use the following tables to troubleshoot some common problems y ou may encounter with the printer .
Chapter 3 — Troubleshooting and Maintaining the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 59 The printer i s not printing with a Bluetoo th connection. • Re-establish a Bluetooth connection with the mobile computer or scanner .
Chapter 3 — Troubleshooting and Maintaining the PB22 an d PB32 60 PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide T roubleshooting Communication Problems Use Dump mode to verify that the pr inter is receiving data from the host correctly .
Chapter 3 — Troubleshooting and Maintaining the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 61 As long as a continuous string of characters is being received, the program wraps the lines until the label is full and then star ts to print another label.
Chapter 3 — Troubleshooting and Maintaining the PB22 an d PB32 62 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Resetting the Printer Y ou rarely need to reset the printer, unless you are upgrading the f irmware. If y our printer occasionally locks up, you will want to reset it.
Chapter 3 — Troubleshooting and Maintaining the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 63 PB22 and PB32 Mobile Label and Receipt Printer: Identifying t he parts .
Chapter 3 — Troubleshooting and Maintaining the PB22 an d PB32 64 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 6 Allow the printhead to dry for a minute or more before loading a new supply of media and ribbon.
Chapter 3 — Troubleshooting and Maintaining the PB22 and PB32 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 65 2 Remove the media and ribbon.
Chapter 3 — Troubleshooting and Maintaining the PB22 an d PB32 66 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide.
67 A Specifications.
Appendix A — Specifications 68 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Specifications PB22 Physical Dimensions Depth: 71. 1 mm (2.8 in) Height: 176.4 mm (6.9 in) Width: 101.6 mm (4.0 in) W eight: 678 g (1.5 lb) with battery PB32 Physical Dimensions Depth: 81.
Appendix A — Specifications PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 69 Receipt roll stock media is supplied as a continuous roll.
Appendix A — Specifications 70 PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide • Notc h: Ta g m e d i a • Black mark: T ag, and fanfold media Here are a few things to keep in mind when ordering media for the printer: • Black marks are detected only on the back (non-thermally sensitive) side of the media.
Appendix A — Specifications PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 71 Use the following table as a guide when setting sensitivity numbers. Interfaces This section describes the standard inter faces available on the PB22 and PB32 printers.
Appendix A — Specifications 72 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide RS-232 Serial Interf ace Use the following tables and grap hics to un derstand the default settings of the serial port. The illustration below shows printer end of the serial cable.
Appendix A — Specifications PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 73 The illustration below shows the PC end of the serial cable. RS-232 Serial Cable DB9 Pins USB Interface T o use the USB inter face to print from a PC, you need to have the Intermec InterDriver pr inter driver installed on your PC.
Appendix A — Specifications 74 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide The USB cable that ships with the printer has a USB T ype A connector on one end to connect to the PC and a USB Type B connector on the other end to connect to the printe r.
Appendix A — Specifications PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 75 Belt Clip Use the printer belt clip to attach the printer to your belt. Handstrap Use the printer handstrap to conveniently carr y your printer. With the handstrap attached, you can also attach the shoulder strap.
Appendix A — Specifications 76 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide.
77 B Default S ettings.
Appendix B — Default Settings 78 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Factor y Default Settings (Fingerprint Printers) Factor y Default Settings for Fingerprint Printers Set.
Appendix B— Default Setti ngs PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 79 Factor y Default Settings (IPL Printers ) Reserve printer Disab le Device name 1-16 characters Passcode.
Appendix B — Default Settings 80 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide Factor y Default Settings (ESC/P Printers ) Protocol XON/XOFF Network IP selection DHCP and BOOTP IP address 0.0.0.0 Netmask 0.0.0.0 Default router 0.0.0.
Appendix B— Default Setti ngs PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 81 Connectable Enable Encr yption Disable Authentication Disable Reserve printer Disab le Device name 1-16.
Appendix B — Default Settings 82 PB22 and PB32 Mobile Label and Receipt Printer User’s Gu ide.
83 C IPL and Fingerprint Setup Menus.
Appendix C — IPL and Fingerprint Setup Menus 84 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide IPL Setup Menu Setup SER-COM NETWORK TEST/SERVICE MEDIA CONF IGURATION POWER IP SELECTIO.
Appendix C — IPL and Fingerprint Setup Menus PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 85 Fingerprint Setup Menu Setup SER-COM NET-COM, NET1 NETWORK FEEDADJ MEDIA PRINT DEFS POWE.
Appendix C — IPL and Fingerprint Setup Menus 86 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide.
87 I Index Numerics 802.11 radio icons, u nderstanding 37 setting up communications 34 A AB27 battery 74 AC18 battery charger 13 , 74 accessories AB27 battery 74 AC18 battery charger 74 AV14 vehicle d.
Index 88 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide C cleaning the printer 62 cold boot 62 communication problems 60 using Dump mode in IP L 61 using the line analyzer in Fingerprint 60 communications setting up 802 .
Index PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 89 WPA-PSK/WPA2-PSK authentication,configurin g to use 38 L language, see printer language load media 15 M media loading 15 recommen.
Index 90 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide connecting to the printer 30 W WEP authentication configuring with Fingerprint 40 configuring with IPL 38 WPA/WPA2 authentication.
.
Worldwide Headquarters 6001 36th Avenue W est Everett, Washington 98203 U. S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2011 Intermec T echnologies Corporation.
An important point after buying a device Intermec PB22 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intermec PB22 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intermec PB22 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intermec PB22 you will learn all the available features of the product, as well as information on its operation. The information that you get Intermec PB22 will certainly help you make a decision on the purchase.
If you already are a holder of Intermec PB22, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intermec PB22.
However, one of the most important roles played by the user manual is to help in solving problems with Intermec PB22. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intermec PB22 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
