Instruction/ maintenance manual of the product XP-P5CM-GL Intel
Go to page of 28
M - 0505 01 XP-P5CM-GV/ XP-P5CM-GL Intel ® Pentium ® 4 LGA775 Processor Motherboard User's Manual.
Motherboard XP-P5CM-GV/XP-P5CM-GL May 25, 2005 May 25, 2005 XP-P5CM-GV/XP-P5CM-GL Motherboard Copyright Declaration © 2005 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology.
Contents Motherboard Layout ......................................................................... 4 1. Product Introduction .................................................................. 5 1.1. Feature Summary .................................
4 English Motherboard Layout Only for XP-P5CM-GV. Only for XP-P5CM-GL. KB_MS COM1 ATX LPT CPU_FAN F_PANEL F_USB1 PWR_LED CODEC CD_IN LGA775 USB LAN BAT ICH6 PCI1 PCI2 IT8712F BIOS XP-P5CM VGA ATX_12V .
English 5 1. Product Introduction 1.1. Feature Summary CPU LGA775 for Intel ® Pentium ® 4 Processor Intel ® Pentium ® 4 533/800MHz FSB L2 cache depends on CPU Chipset North Bridge: Intel ® 915 G V / G L South Bridge: Intel ® I CH 6 Memory 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max.
6 English 1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.2. Connectors&Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the connector.
English 7 CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN) power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires.
8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10 pin jumper.
English 9 F_USB1 (Front USB Connector) Connects to the USB connector located on the front panel of the system casing (dependent on case design). Note: Please make sure that each USB connection matches its designated position. If connections are made incorrectly, the result can lead to inability to use the function or even damage.
10 English 2. Hardware Installation 1. Please make sure that the CPU used is supported by your motherboard. 2. Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.
English 11 1. Apply a thin coating of thermal paste to complete cover the surface of the CPU. 2.1.2. Installation of Fan Sink 4. Make sure the CPU is properly installed and then close the load plate. Lower the socket lever and engage it to lock the CPU in place.
12 English 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design.
English 13 2.3. Installation of the Graphics Card 1. Before installing the graphics card, please carefully read the accompanying user manual. As well, make sure the computer power is turned off.
14 English Figure 1-2. 4X AGP Card Figure 2. 8X AGP Card To be continued... Graphics Chip Maker Model Name Nvidia Gigabyte GV-N57L128D Gigabyte GV-N59X128D ASUS V9180TD ASUS V9480-TVD ASUS V9520 MSI M.
English 15 Figure 3. PCI Express x16 Card For the most up-to-date information related to graphics card support, please link to our website at http://www.
16 English.
English 17 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features.
18 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters BIOSNow! feature <F9> Displays system information <F10> Saves settings and exits setup 3.
English 19 n Drive A/B Allows user to configure the type of floppy drive his/she installs. Options: None (No floppy drive installed) 360K, 5.25" (5.25 inch PC-type high-density drive; 360K bytes capacity.) 1.2M, 5.25" (5.25 inch AT-type high-density drive; 1.
20 English " # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology, the system will automatically provide this option. 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc.
English 21 3.4. Integrated Peripherals ø This menu allows you to control the various ports of the computer such as IDE, SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc. n On-Chip Primary PCI IDE Allows the user to enable or disable the first onboard IDE channel.
22 English n PATA IDE Set to Options: Ch.0 Master/Slave, Ch.1 Master/Slave (default:Ch.0 Master/Slave ) n SATA Port 0/2 Set to This value depends on the settings of "On-Chip SATA Mode" and "PATA IDE Set to". For example, if you set PATA IDE to Ch.
English 23 3.5. Power Management Setup ø This is used to control the various power saving features of the PC. n ACPI Suspend Type Allows user to select the Advanced Configuration and Power Interface(.
24 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI slots. n PCI 1 IRQ Assignment Allows you to assign an IRQ for the first PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14, 15 (default:Auto) n PCI 2 IRQ Assignment Allows you to assign an IRQ for the second PCI slot.
English 25 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n Current Voltage(V) Vcore / DDR25V / +3.
26 English 3.8. Frequency/Voltage Control ø This allows user to configure CPU frequency and voltage settings. n CPU Clock Ratio Allows user to set the CPU Clock Ratio. If the CPU used locks this feature, then it will not be displayed or will not function.
English 27 3.9. Load Fail-Safe Defaults ø Use this option to reset your BIOS settings to the system defaults. You should only use this if you are encountering serious problems.
28 English 4. Driver Installation Driver installation for the Windows 2000/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear. If this screen does not appear, you can use "D:setup.
An important point after buying a device Intel XP-P5CM-GL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel XP-P5CM-GL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel XP-P5CM-GL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel XP-P5CM-GL you will learn all the available features of the product, as well as information on its operation. The information that you get Intel XP-P5CM-GL will certainly help you make a decision on the purchase.
If you already are a holder of Intel XP-P5CM-GL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel XP-P5CM-GL.
However, one of the most important roles played by the user manual is to help in solving problems with Intel XP-P5CM-GL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel XP-P5CM-GL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
