Instruction/ maintenance manual of the product TC 32 LX CF Intel
Go to page of 10
0 The IGEL TC-Card Installation Guide TC 32 LX CF and TC 64 LX CF Revision 1 .3 11/2004.
1 Contents Page Introduction 2 PC Requirements 2 Installation 3 Mounting the TC-Card 4 Connecting th e Hard Drive Cable 5 The Power Connector 6 Supported Video Cards 7 Supported Network Interface Card.
2 Introduction The TC-card from IGEL Technology offe rs a cost-effective entry into the world of server-based co mputing. Within a fe w minutes your old PC workstation turns into an efficient a nd cost-saving IGEL Clever Client.
3 Installation 1. Disconnect the power from the PC and open the PC case 2. Install the TC-card in any spare expansion card mounting slot. 3. Locate the hard-drive and disconnect the IDE hard drive ribbon cable from the hard drive and connect it to the IDE hard drive connector on the TC-card.
4 Mounting the TC-Card The TC-Card can usually be mounted in any spare card slot as shown in figure 2. Ensure the TC-card is not touching any other components or th e chassis.
5 Connecting the Hard Drive Cable The TC-card must be set to be master (figure 3) and be c onnected to the primary IDE channel. The 40 pin hard drive cable connector usually has a “key” on one side (figure 4). Ensure th is mates with the notch in the 40 pin socket on the TC-Card.
6 The Power Connector The IGEL TC-Card requires power from the small (3.5" floppy style) power connector found in most PCs as shown in figure 6 below.
7 Supported Video cards The vast majority of video cards sh ould work satisfactorily with the TC-card in VESA mode. The follow ing specific video cards have been tested by IGEL and have been found to work sa tisfactorily. Should you encounter a problem with your vi deo card, please contact IGEL for resolution.
8 Supported Network Interface cards (NIC) Any Network Interface Card that are NE1000 or NE2000 compatible should w ork satisfactorily with the TC-card. The foll owing specific NICs have been tested by IG EL and have been found to work satisfactorily. Should you encounter a problem with your NIC, please contact IGEL for resolution.
9 IGEL Technology 5450 NW Ave 33rd. Suite 100 Fort Lauderdale , FL 33309 USA Tel: +01 954 739 - 9990 Fax:+01 954 793 - 9991 info@igel. com http://www.i gel.com IGEL Technology GmbH Schlachte 39/40 28195 Bremen Germany Tel: +49 421 1769 - 370 Fax: +49 421 1769 - 302 info@igel.
An important point after buying a device Intel TC 32 LX CF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel TC 32 LX CF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel TC 32 LX CF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel TC 32 LX CF you will learn all the available features of the product, as well as information on its operation. The information that you get Intel TC 32 LX CF will certainly help you make a decision on the purchase.
If you already are a holder of Intel TC 32 LX CF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel TC 32 LX CF.
However, one of the most important roles played by the user manual is to help in solving problems with Intel TC 32 LX CF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel TC 32 LX CF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
