Instruction/ maintenance manual of the product PRO/1000 PF Intel
Go to page of 4
Intel ® PRO/ 1 000 PF Dual P o r t Ser ver Adapter T wo Gigabit Fiber Server Connections in a Single PCI Express* Slot • T wo high-performance PCI Express* 1000BASE-SX connections for slot- constra.
Specifications: Intel ® PRO/ 1000 PF Dual Por t Ser ver Adapter General Product code EXPI9402PF 4 Connectors LC IEEE standards/network topology 1000BASE-SX Wiring Multi-mode fiber (62.
T echnical Features Data rate(s) supported per port 10, 100, and 1000 Mbps Bus type PCI Express 1.0a Bus width x4 lane PCI Express operable in x4, x8, x16 slots Bus speed (x4, encoded ra te) 10 Gbps uni-directional; 10 Gbps bi-directional EEPROM-SPI and single EEPROM support • Interrupt levels INT A, INTB IEEE support 802.
1 Lead has not been intentionally added, but lead may still exist as an impurity below 1000 ppm, or an approved RoHS exemption applies. 2 Low-profile brackets will be included with this product in early 2006.
An important point after buying a device Intel PRO/1000 PF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel PRO/1000 PF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel PRO/1000 PF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel PRO/1000 PF you will learn all the available features of the product, as well as information on its operation. The information that you get Intel PRO/1000 PF will certainly help you make a decision on the purchase.
If you already are a holder of Intel PRO/1000 PF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel PRO/1000 PF.
However, one of the most important roles played by the user manual is to help in solving problems with Intel PRO/1000 PF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel PRO/1000 PF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
