Instruction/ maintenance manual of the product MIC-3321 Intel
Go to page of 50
MIC-3321 3U Comp actPCI Pentium M 760 2.0G High-performance Controller User Manual.
MIC-3321 User Manual ii Copyright Notice This document is copyrighted, 200 4. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time wi thout notice.
iii Product W arranty Advantech warrants to you, the orig inal purchaser , that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
MIC-3321 User Manual iv T echnical Support and Assistance Step 1. V isit the Advantech web site at www .advantech.com/support where you can find the latest information about the product. Step 2. Contact your distrib utor , sales representative, or Advantech's cus- tomer service center for technical support if you need additional assistance.
v Table of Contents Contents Chapter 1 Hardware Co nfiguration ................................ 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Specifications ............ .............. ...........
MIC-3321 User Manual vi 4.2.5 PNP /PCI Configuration Setup .. ............. ........... ........... 29 Figure 4.6:PNP/PCI c onfiguration screen ...... ............. 29 4.2.6 PC Hea lth Status ... ............. ........... .............. ........... ..
22 CHAPTER 1 Hardware Configuration.
MIC-3321 User Manual 2 Chapter 1 Hardware Configuration 1.1 Introduction MIC-3321 is a 3U, all-in-one, controller board, complian t with PICMG 2.0 R2.1 CompactPC I specifications. For high com puting performance, MIC-3321 uses an Intel Pentium M 760 2.
3 Chapter 1 1.2 Specifications 1.2.1 St andard SBC Functions • CPU: MIC-3321 su pports Intel Pentium M 2.0 GHz • Optional: Celeron M 1.0GHz/ Celeron M 800MHz (non cache) • BIOS: A ward 4 Mb flas.
MIC-3321 User Manual 4 1.2.2 Display • Controller: Intel Graphics Media Accelerator 900 • VRAM: DVMT3.0 128MB • Resolution: Up to 2048x1536 with 32-bit color at 75Hz 1.2.3 Mechanical and Environment al Specifications • Board Size (W x H) : 160 x 100 mm (3U) • Operating T emperature: 0 ~ 50° C (MIC-3321 Pentium M 2.
5 Chapter 1 1.4 Board Dimensions Figure 1.2: MIC-3321 Board Dimensions 1.5 Dip Switch Settings Since MIC-3321 is composed of one main board and on e daughter board, for ease of understanding and a convenient naming, we wil l use 1F (1st level) to represent the main board, an d 2F (2nd level) to represent the daughter board hereafter in this manual.
MIC-3321 User Manual 6 1.5.1 Switch Locations T able 1.1 lists the switch functions of MIC-3321 (be sure that the switch is white one). Figure 1.3 and Figure 1. 4 show the location s of S1 and S2, respectively . Figure 1.3: MIC-3321 S1 Location (1F) T able 1.
7 Chapter 1 Figure 1.4: MIC-3321 S2 Location (2F) 1.6 Safety Precautions Follow these simple precautions to protect yourself and the products. 1. T o avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any compo nents on the CPU card or other cards while the PC is on.
MIC-3321 User Manual 8.
22 CHAPTER 2 Connecting Peripherals.
MIC-3321 User Manual 10 Chapter 2 Connecting Peripherals 2.1 Connectors Figure 2.1 and 2.2 show MIC-3321 connector locations. Figure 2.3 shows MIC-3521 connector locat ion.
11 Chapter 2 Figure 2.3: MIC-3521 Connectors.
MIC-3321 User Manual 12 T able 2.1: MIC-3321 Connectors Overview Number Function Description 1F-CN1 USB1 USB1 T ype -A Female on Front side panel. 1F-CN3 USB2 USB2 T ype -A Female on Front side panel. 1F-CN2 CF CompactFlash socket 1F-CN5 VGA D-Sub 15-pin (Female) on Front side panel.
13 Chapter 2 2.2 Card Inst allation The CompactPCI connectors are firm and rigid, bu t require careful han- dling while plu gging and unpluggi ng. Improper instal lation of a card can easily damage the backplane of the chassis. The inject/eject handle of MIC -3321 helps you install and remove the card easily and safely .
MIC-3321 User Manual 14 T o remove a card: 1. Unscrew the four screws on the front pan el. 2. Press the lower handle dow n to re lease the card from the backplane.
22 CHAPTER 3 Sof tware Configuration.
MIC-3321 User Manual 16 Chapter 3 Sof tware Configuration 3.1 Overview MIC-3321 has a CD-ROM with utilities and drivers. Please install the Chipset INF driver , VGA graphics driver, and LAN driver . 3.2 Utilities and Drivers The following utiliti es and drivers are provided with the MIC-3321 series.
22 CHAPTER 4 Aw a r d B I O S S e t u p.
MIC-3321 User Manual 18 Chapter 4 A ward BIOS Setup 4.1 Introduction Once you enter the A ward BIOS CMOS Setup Utility , the Main Menu (Figure 4-1) will appear on the sc reen. The Main Menu allows you to select between nine setup functions and two exit choices.
19 Chapter 4 4.2.1 St andard CMOS Setup Figure 4.2: S tandard CMOS Setup Screen. Date The date format is <week>, <month>, <day>, <year>. Time The time format is <hour> <minute> <seco nd>, based on the 24-hour clock.
MIC-3321 User Manual 20 Halt On This category determines whether system start-up will halt when an error is detected during p ower up. The options are: No Errors/All Errors/All , But Keyboard/All, But Dis- kette/ All, B ut Disk/Key Memory This category display s base, extended, and t otal memory det ected during the POST (Power On Self T est).
21 Chapter 4 Hard Disk Boot Priority Set hard disk boot device priority . CPU Thermal Monitor The Intel Thermal MonitorAutomati c Mode. There are two Automatic modes called Intel Thermal Monit or 1 (TM1) and Intel Thermal Monitor 2 (TM2). And MIC-332 1 Auto dete C-M or P-M.
MIC-3321 User Manual 22 CPU L1 & L2 Cache Enabled (default) Enable cache Disabled Disable cache Note: The internal cache is built into the processor . Quick Power On Self T est This category speeds up Power On Self T est (POST) after you power on the computer .
23 Chapter 4 T ypematic Rate Setting Keystrokes repeat at a rate determin ed by the keyboard controller . When enabled, the typematic rate and type matic delay can be selected. The set- tings are: Enabled/Disabl ed. The default setting is Disabled. T ypematic Rate (Chars/Sec) Set the number of times a second to repeat a ke ystroke key d own.
MIC-3321 User Manual 24 4.2.3 Advanced Chip set Features Setup The Advanced Chipset Features Setup opt ion is used to change the values of the chipset registers. These registers control most of the system options in the computer . Choose the "Advanced Chipset Features" from the main menu and the followi ng screen will appear .
25 Chapter 4 DRAM RAS# to CAS# Delay This field is used to insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read fr om, or refreshed. Fast gives faster performance; and Sl ow gives more stable perfo rmance. This field applies only when synchronous DRAM have been instal led in the system.
MIC-3321 User Manual 26 Memory Hole At 15M -16M Y ou can reserve this area of system memory for ISA adapter ROM. When this area is reserved, it cannot be cach ed. The user information of periph- erals that need to use this area of system memory usually discuss es their memory requirements.
27 Chapter 4 IDE HDD Block Mode Block mode is also called bl ock transfer , multiple commands, or multip le sector read/write. If your IDE hard driv e supports block mode (most new drives do), select Enabled for automa tic detection of the optimal number of block read/w rites per sect or the drive can support.
MIC-3321 User Manual 28 USB Contr oller Select enabled if your system contains a Univ ersal Serial Bus (USB) 1.1 controller . The settings are: Enabled (Default), Disabled. USB 2.0 Controller Select enabled if your system contains a Univ ersal Serial Bus (USB) 2.
29 Chapter 4 4.2.5 PNP/PCI Configuration Setup This section describes confi guring the PCI bus system. PCI, or Personal Computer Interconnect, is a system that allows I/O devices to operate at speeds nearing the speed the CPU itse lf uses when co mmunicat ing with its own special components.
MIC-3321 User Manual 30 Resource Contr olled By The A ward Plug and Play BIOS has th e capacity to automatically config- ure all the boot and Plug and Play compatible devices. However, this capability means absolutely nothing unl ess you are using a Plug and Play operating system such as W indows 95/ 98.
31 Chapter 4 Figure 4.7: PC Health S tatus setup screen CPU W arning T emperature This item will prevent the CPU from overheating. The choices are “Dis- abled”, “50C/122F”, “53C/127F”, “.
MIC-3321 User Manual 32 4.2.7 Sp read Spectrum Control Figure 4.8: PC Health S tatus setup screen Spread Spectru m This allows the enable spread spect rum function.
33 Chapter 4 4.2.9 Set Password T o change, confirm, o r disable the passw ord, choose the "P ASSWO RD SETTING" option form the Setup main menu and press [Enter]. The password can be at most 8 characters long. Remember , to enable this fea- ture.
MIC-3321 User Manual 34 4.2.10 Save & Exit Setup If you select this and press the [Enter ] key , the valu es entered in the setup utilities will be recorded in the CMOS memory of the chi pset. The micro- processor wil l check this every time you turn your system on and com- pare this to what it finds as it check s the system.
2 APPENDIX A Programming the W atchdog T imer.
MIC-3321 User Manual 36 Appendix A W atchdog Ti mer Programming T o program the watchdog timer, you must write a program which writes a value to I/O port address 443 (hex). Thi s output value represents time interv al. The value range is from 01 (hex) to FF (h ex), and the related time interval is 0.
2 APPENDIX B Pin Assignment.
MIC-3321 User Manual 38 Appendix B Pin Assignment This chapter shows the p in assignments of MIC-3321 series C PU cards. T able B.1: MIC-3321 Connectors Overview Number Functi on Description 1F-CN1 USB1 USB1 T ype-A Female on Front side panel. 1F-CN3 USB2 USB2 T ype-A Female on Front side panel.
39 Appendix B B.1 Comp actFlash Interface The socket accepts an IDE-compat ible CompactFlash memory card. *LOW ACTIVE T able B.2: CompactFlash Interface Pin Definiti ons Pin Signal Pin Signal 1 GND 26.
MIC-3321 User Manual 40 B.2 USB 2.0 Port s B.3 VGA Connector T able B.3: USB 1.1 Ports Pin Definitions Pin Signal 1V C C 2U S B _ P - 3U S B _ P + 4G N D Pin Signal 1R E D 2 GREEN 3B L U E 4N / C 5G N.
41 Appendix B B.4 COM port B.5 PS/2 Keyboard and Mouse Connector PS/2 keyboard and mouse port pin defin itions T able B.4: COM Port Pin Definitions PIN RS-232 1 NDCD 2 NRX 3N T X 4 NDTR 5G N D 6 NDSR 7N R T S 8 NCTS 9 NRI T able B.
MIC-3321 User Manual 42 B.6 Ethernet 10/100/ 1000Base-T RJ-45 Connector B.7 Secondary IDE 44-pin 2mm Conn. For direct installation of 2.5" IDE HDD (2F-CN17) For wiring out (2F-CN18) T able B.
43 Appendix B *LOW ACTIVE T able B.7: Secondary ID E Connectors (2.5" HDD) Pin Signal Pin Signal 1 IDERST* 2 GND 3 SDD7 4 SDD8 5 SDD6 6 SDD9 7 SDD5 8 SDD10 9 SDD4 10 SDD1 1 1 1 SDD3 12 SDD12 13 S.
MIC-3321 User Manual 44 B.8 Serial A T A0 (7pin connector) Pin Signal 1G N D 2T X + 3T X - 4G N D 5R X - 6R X + 7G N D.
An important point after buying a device Intel MIC-3321 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel MIC-3321 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel MIC-3321 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel MIC-3321 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel MIC-3321 will certainly help you make a decision on the purchase.
If you already are a holder of Intel MIC-3321, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel MIC-3321.
However, one of the most important roles played by the user manual is to help in solving problems with Intel MIC-3321. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel MIC-3321 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
