Instruction/ maintenance manual of the product ATC6430M Intel
Go to page of 40
How To Use This Manual ATC 6430M Mainboard HOW TO USE THIS MANUAL This manual is written in a user - friendly style. It would be advisable for users to read it in an orderly sequence : 1.
ATC6 430M Mainboard Contents CONTENTS QUICK JUMPER & CONNECTOR SETTING .......................... A SLOT 1 AND PENTIUM II/III INSTALLATION...................B CONNECTORS AND JUMPERS DESCRIPTION .................... C CHECKLIST OF PACKAGING..... ..
Contents ATC6430 Mainboard 3 - 2 - 5 Power Management Setup ......................................................................27 3 - 2 - 6 PNP/PCI Configuration ..........................................................................31 3 - 2 - 7 PC Health Status .
ATC6430M Mainboard Chapter 1 System Fea tures 1 CHAPTER 1 System Features 1 - 1 Introduction 6430M mainboard is designed to run with Intel 810 chipset to enhance the performance and extraordinary value of the Intel Celeron TM processor - powered PC .
Chapter 1 System Features ATC 6430M Mainboard 2 1 - 2 System Specifications of 6 430M Mainboard : CPU Support: u Single CPU, with both Slot 1 and PPGA Socket 370 on board for choice. u Supports CPU Clock 66MHz, 100MHz and 133MHz ( 133MHz support “Slot 1” socket only ).
ATC6430M Mainboard Chapter 1 System Fea tures 3 : BIOS Support: u Built - in VGA BIOS in Intel 810; and built - in Keyboard BIOS;. u AWARD BIOS in Int el 810, providing CMOS Setup Utilities : - Standa.
Chapter 1 System Features ATC 6430M Mainboard 4 1 - 3 Features Highlight 1 - 3 - 1 Add - on Features for VGA in Intel 810: : Integrated Graphics Controller u 3D Hyper Pipelined Architecture . u Full 2D H/W Acceleration . u Motion Video Acceleration . : 3D Graphics Visual Enhancement s u Flat & Gouraud Shading .
ATC6430M Mainboard Chapter 1 System Fea tures 5 1 - 3 - 3 AMR and AC’97 CODEC Controller AMR slot and AC’97 CODEC are integrated into t he Mainboard to enable audio and modem playback. AMR (Audio/Modem Riser) slot is mounted on board to connect riser board with Audio and/or Modem CODEC (AMC/AC/MC Adapters).
Chapter 1 System Features ATC 6430M Mainboard 6 1 - 3 - 5 Modem Ring On With Modem Ring On function, the computer can wake up by remote signal through a connected modem. This function enables users to access their computer data from anywhere in the world.
ATC6430M Mainboard Chapter 1 System Fea tures 7 1 - 3 - 7 Ultra DMA 66 Cable (optional) Ultra DMA 66 cable (40 - pin connector & 80 - line cable) is packaged while u tilizing FW82801AA chip which supports both UDMA 33 & UDMA 66 on the mainboard .
Chapter 1 System Features ATC 6430M Mainboard 8 Function ” enabled through “ Power Management Setup” from the BIOS setup screen. Caution: For Wake - On - LAN, the +5V standby line for the power supply should be capable of delivering +5V ± 5% at 720 mA .
6430M Mainboard Chapter 2 Installa tion 9 CHAPTER 2 INSTALLATION 2 - 1 INSTALLATION PROCEDURE Before installing the computer, please prepare all components such as CPU, DRAM; peripherals such as hard drive, keyboard, CD - ROM and accessories such as cables.
Chapter 2 Installation 6430M Mainboard 10 2 - 2 CPU INSTALLATION This mainboard supports PPGA Socket 370 and Slot 1 processors. The 6430M mainboard has built - in Switching Voltage Regulator to support CPU Vcore autodetection.
6430M Mainboard Chapter 2 Installa tion 11 2 - 3 SYSTEM MEMORY INSTALLATION 6430M mainboard provides two 3.3V 168 - pin DIMM sockets for system memory expansion from 8MB to 512 M B SDRAM. These two DIMMs are arranged to two banks, please refer to page A.
Chapter 2 Installation 6430M Mainboard 12 2 - 4 INTEL 810 DRIVER INSTALLATION Ø Ø INF Files for Windows 95 /98 : 1. Start Windows 95 /98. 2. Put the All - In - One CD into your CD - ROM drive. 3. Choose Intel 810/820 Inf Files on the Autorun main menu.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 13 CHAPTER 3 AWARD BIOS SETUP Award BIOS manufacturer provides access to the system BIOS through the hardware and software on mainboard.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 14 3 - 1 UPDATE BIOS PROCEDURE 3 - 1 - 1 BIOS Update: If the BIOS needs to be updated, you can get a CD with the updated BIOS utility in the package. The CD includes : “awdflash.exe” -- BIOS update utility program “awdflash.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 15 3 - 1 - 2 UPDATE MICROCODE API Intel also provides MICROCOD E API (Applications Programming Interface) for mainboard user to update data block in BIOS quickly and easily. (You can find this utility in the All - In - One CD in the mainboard package).
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 16 3 - 2 SYSTEM BIOS CONFIGURATION SETUP The following pages explain how to set up the BIOS configuration under the Award BIOS. The SETUP program is stored in the Read - Only - Memory (ROM) on the mainboard.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 17 Control Key Description UP ARROW Move to the previous item DOWN ARROW Move to the next item LEFT ARROW Move to the item on.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 18 3 - 2 - 1 STANDARD CMOS FEATURES This screen records some basic hardware information, and sets the system clock and error handling. These records can be lost or corrupted if the on - board battery has failed or is weak.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 19 IDE Primary Master; Primary Slave Secondary Master; Secondary Slave Press Enter to enter next page for detailed hard drive setting s: CMOS Setup Utili.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 20 Drive A, Drive B This categ ory identifies the types of floppy disk drive A or drive B that have been installed in the computer. None No floppy drive installed 360K, 5.25 in 5.25“ PC - type 360KB capacity 1.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 21 3 - 2 - 2 ADVANCED BIOS FEATURES This screen is a list of system configuration options. Some of them are defaults required by the mainboard’s design, others depend on the features of your system.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 22 CPU L2 Cache ECC Checking If Enabled, this function will do ECC check to CPU L2 Cache automatically. Quick Power On Self Test This category speeds up Power On Self Te st while booting. If “Enabled”, BIOS will skip some items under check by POST .
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 23 OS Select for DRAM > 64MB This item allow s you to access the memory that is over 64MB in OS/2. The choice : Non - OS2, OS2 HDD S.M.A.R.T. Capability Select Enabled if your Hard disk supports S.M.A.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 24 3 - 2 - 3 ADVANCED C HIPSET FEATURES This screen contro ls the setting for the chipset on the mainboard.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 25 SDRAM CAS Latency Time When synchronous DRAM is installed, the number of clock cycles of CAS latency depe nds on the DRAM timing. The choices: 2,3. “2” gives faster performance and “3” gives more stable performance.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 26 page miss. Open: it will precharge bank during the service of a page miss. RAS - to - CAS Override By CAS# LT: the RAS - to - CAS delay timing will be the same as item of CAS# Latency . Override: the value will be fix ed in 2.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 27 3 - 2 - 4 INTEGRATED PERIPHERALS This section page includes all the items of IDE hard drive and Programmed Input/Output features.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 28 simpler and faster. Your system supports five modes, 0 - 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode. IDE Primary Master/Slave UDMA; IDE Secon dary Master/Slave UDMA Auto, will support the Ultra DMA function.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 29 U ART Mode Select This lets you select the Infrared mode. Choices are IrDA, ASKIR, Normal, and SCR . Only when you choose IrDA or ASKIR , the screen will then show “UART2 Duplex Mode’ for you to choose “Full” or “Half”.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 30 3 - 2 - 5 POWER MANAGEMENT SETUP This screen controls the 'green' features of this mainboard.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 31 Video Off Method This determines the manner in which the monitor is blanked. V/H SYNC + Blank This selection will cause the system to turn off the vertical and horizontal sync. port s and write blanks to the video buffer.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 32 3 - 2 - 6 PNP/PCI CONFIGURATION This screen configures the PCI Bus slots. CMOS Setup Utility – Copyright © 1984 - 1998 Award Software PnP/PCI Confi.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 33 Memory Resources Length 8K.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 34 PCI/VGA Snoop It determines whether the MPEG ISA/VGA cards can work with PCI/VGA or not. Enabled When PCI/VGA working with MPEG ISA/VGA Card Disabl ed.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 35 3 - 2 - 7 PC Health Status This screen shows your in - use PC Health Condition: CMOS Setup Utility – Copyright © 1984 - 1998 Award Software PC Health Status Vcore +2.
Chapter 3 Award BIOS Setu p ATC6430M Mainboard 36 3 - 2 - 8 FREQUENCY / VOLTAGE CONTROL This screen controls the 'green' features of this mainboard.
ATC6430M Mainboard Chapter 3 A ward BIOS Setup 37 3 - 2 - 9 LOAD FAIL - SAFE DEFAULTS When your mainboard has problems and needs to trouble shoot the system, you can use this function. The default values loaded only affect the BIOS Fe atures Setup, Chipset Features Setup, Power Management Setup and PNP/PCI Configuration Setup.
An important point after buying a device Intel ATC6430M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel ATC6430M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel ATC6430M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel ATC6430M you will learn all the available features of the product, as well as information on its operation. The information that you get Intel ATC6430M will certainly help you make a decision on the purchase.
If you already are a holder of Intel ATC6430M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel ATC6430M.
However, one of the most important roles played by the user manual is to help in solving problems with Intel ATC6430M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel ATC6430M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
