Instruction/ maintenance manual of the product 8VM800M-RZ Intel
Go to page of 40
Copyright © 2005 GIGABYTE TECHNOLOGY CO., L TD Copyright by GIGA-BYTE TECHNOLOGY CO., L TD. ("GBT"). No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT . Trademarks Third-party brands and names are the property of their respective owners.
Motherboard 8VM800M-RZ May 31, 2004 Mother Board 8VM800M-RZ May 31, 2004.
Preparing Y our Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside.
- 4 - 8VM800M-RZ Motherboard English T able of Contents Chapter 1 Introduction ................................................................................................... 5 Features Summary .....................................................
Introduction English - 5 - CPU y Socket 478 for Intel ® Pentium ® 4(Northwood, Prescott) with HT T echnology y Intel ® Pentium ® 4 533/400MHz FSB y 2nd cache depends on CPU Chipset y Northbridge :.
- 6 - 8VM800M-RZ Motherboard English Additional Features y Supports @BIOS y Supports EasyTune Overclocking y Over voltage (AGP/DDR) by BIOS y Over clock (CPU/DDR) by BIOS Form Factor y Micro A TX size form factor, 24.
Introduction English - 7 - Block Diagram VIA PM800 VIA VT8237 CPUCLK+/- (100/133MHz) System Bus 533/400MHz MCHCLK (100/133/200MHz) 66 MHz 33 MHz 14.318 MHz 48 MHz LPC BUS AGP 4X/8X AGPCLK (66MHz) 3 PC.
- 8 - 8VM800M-RZ Motherboard English T o set up your computer , you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install .
- 9 - Hardware Installation Process English Step 1-1: CPU Installation Figure 1. Pull the rod to the 90-degree directly. Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.
- 10 - 8VM800M-RZ Motherboard English Before installing the memory modules, adhere to the following warning: 1 . When DIMM LED is ON, do not install / remove DIMM from socket. 2 . Please note that the DIMM module can only fit in one direction due to the one notch.
- 11 - Hardware Installation Process English Step 4: Install I/O Peripherals Cables Step 4-1: I/O Back Panel Introduction X Y Z [ X PS/2 Keyboard and PS/2 Mouse connector This connector supports standard PS/2 keyboard and PS/2 mouse. Y Parallel port (LPT) Device like printer can be connected to Parallel port.
- 12 - 8VM800M-RZ Motherboard English Step 4-2: Connectors Introduction _ Line In jack Devices like CD-ROM, walkman etc. can be connect to Line In jack. ` Line Out jack Connect the stereo speakers or earphone to this connector. a MIC In jack Microphone can be connect to MIC In jack.
- 13 - Hardware Installation Process English 1) A TX_12V (+12V Power Connector) This connector (A TX_12V) supplies the CPU operation voltage (Vcore). If this "A TX_12V connector" is not connected, system cannot boot.
- 14 - 8VM800M-RZ Motherboard English 4) SYS_F AN (System Fan Connector) This connector allows you to link with the cooling fan on the system case to lower the system temperature. Pin No. Definition 1 GND 2 +12V 3 Sense 5) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD.
- 15 - Hardware Installation Process English 8) F_P ANEL (Front Panel Connector) Please connect the power LED, PC speaker, reset switch and power switch etc.
- 16 - 8VM800M-RZ Motherboard English 1 10) F_AUDIO (Front Audio Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header.
- 17 - Hardware Installation Process English 12) SPDIF_IO (SPDIF In/Out Connector) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function.
- 18 - 8VM800M-RZ Motherboard English 15) COMB (COM B Connector) Be careful with the polarity of the COMB connector. Check the pin assignment carefully while you connect the COMB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it.
- 19 - Hardware Installation Process English 1 8 ) BA TTERY CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
- 20 - 8VM800M-RZ Motherboard English.
- 2 1 - BIOS Setup English CONTROL KEYS < >< >< >< > Move to select item <Enter> Select Item <Esc> Main Menu - Quit and not save changes into CMOS Status Page Setup.
- 22 - 8VM800M-RZ Motherboard English • Standard CMOS Features This setup page includes all the items in standard compatible BIOS. • Advanced BIOS Features This setup page includes all the items of Award special enhanced features. • Integrated Peripherals This setup page includes all onboard peripherals.
- 2 3 - BIOS Setup English Standard CMOS Features Date The date format is <week>, <month>, <day>, <year>. Week The week, from Sun to Sat, determined by the BIOS and is display only Month The month, Jan.
- 24 - 8VM800M-RZ Motherboard English Drive A / Drive B The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity.
- 2 5 - BIOS Setup English Advanced BIOS Features First / Second / Third Boot Device Floppy Select your boot device priority by Floppy. LS120 Select your boot device priority by LS120. HDD-0~3 Select your boot device priority by HDD-0~3. SCSI Select your boot device priority by SCSI.
- 26 - 8VM800M-RZ Motherboard English Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software Integrated Peripherals On-Chip IDE Cha nnel 0 [Enabled] On-Chip IDE Cha nnel 1 [Enabled] OnChip Seri al A T A [Enabled] AC97 Audio [Auto] VIA Onboard LAN [Enabled] USB 1.
- 2 7 - BIOS Setup English USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) On-Chip LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function.
- 28 - 8VM800M-RZ Motherboard English Power Management Setup ACPI Suspend Type S1(POS) Set ACPI suspend type to S1/POS (Power On Suspend). (Default value) S3(STR) Set ACPI suspend type to S3/STR (Suspend To RAM). USB Device Wake-Up From S3 Disabled Disable this function.
- 2 9 - BIOS Setup English Modem Ring Resume An incoming call via modem can awake the system from any suspend state. Disabled Disable Modem Ring on function. Enabled Enable Modem Ring on function. (Default value) Resume by Alarm You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on system.
- 30 - 8VM800M-RZ Motherboard English PC Health Status Current Voltage (V) Vcore / DDR25V / +3.3V / +12V Detect system's voltage status automatically. Current CPU Temperature Detect CPU temperature automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/system fan speed status automatically.
- 3 1 - BIOS Setup English Frequency/Voltage Control CPU Clock Ratio This option will not be shown or not be available if you are using a CPU with the locked ratio. 15X~21X It depends on CPU Clock Ratio. This setup option will automatically assign by CPU detection.
- 32 - 8VM800M-RZ Motherboard English DRAM Clock By SPD Set DRAM Clock from as DRAM required. (Default value) 100-DDR200 Set at "100-DDR200" if you use DDR200 memory module. 133-DDR266 Set at "133-DDR266" if you use DDR266 memory module.
- 3 3 - BIOS Setup English Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software ` Sta ndard CMOS Features ` Adva nced BIOS Features ` Integrated Peripherals ` Power Ma na.
- 34 - 8VM800M-RZ Motherboard English CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software ` Sta ndard CMOS Features ` Adva nced BIOS Features ` Integrated Peripherals ` Power Ma nagement Setup .
- 3 5 - BIOS Setup English Exit Without Saving CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software ` Sta ndard CMOS Features ` Adva nced BIOS Features ` Integrated Peripherals ` Power Ma nageme.
- 36 - 8VM800M-RZ Motherboard English.
Driver Installation - 37 - English Revision History Chapter 3 Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide.
- 38 - 8VM800M-RZ Motherboard English VIA 4IN1 Driver For INF , AGP , IDE and DMA driver . VIA PM800/880 VGA Driver VGA driver for VGA integrated VIA PM800/880 chipset. USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.
Driver Installation - 39 - English.
- 40 - 8VM800M-RZ Motherboard English y y y y y T aiwan Gigabyte T echnology Co., Ltd. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei Hsien, T aiwan, R.O.C. T el: 886 (2) 8912-4888 Fax: 886 (2) 8912-4003 T ech. Support: http://tw.giga-byte.com/T echSupport/ServiceCenter.
An important point after buying a device Intel 8VM800M-RZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel 8VM800M-RZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel 8VM800M-RZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel 8VM800M-RZ you will learn all the available features of the product, as well as information on its operation. The information that you get Intel 8VM800M-RZ will certainly help you make a decision on the purchase.
If you already are a holder of Intel 8VM800M-RZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel 8VM800M-RZ.
However, one of the most important roles played by the user manual is to help in solving problems with Intel 8VM800M-RZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel 8VM800M-RZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
