Instruction/ maintenance manual of the product 845GL Intel
Go to page of 27
Intel845GL/GV Main board User’s Manual Rev: 1.0/1.2 PCB: M248 CONTENTS CHAPTER 1 PACKAGE CONTENTS………………….………………… CHAPTER 2 INTRODUCTION……………………….…………………... CHAPTER 3 MAIN BOARD LOCATIONS……………………………….
Chapter 1 Package Contents Your main board package contains the following items: 1. One M248 Rev:1.0/1.2 main board 2. One 80-Pin Ultra DMA 66/100 IDE drive ribbon cable 3. One 34-Pin Floppy drive ribbon cable 4. One front panel connector ribbon cable (optional) 5.
-Integrated display function technologies without extend VGA card Integrated 2D/3D Graphics Controller -USB Ports Six USB ports Supports compliant with Universal Se rial Bus Specification Revision 2.
Chapter 3 Main board Locations.
Chapter 4 Installation 4.1 Jumper Setting and Slot FSB CPU Frequency Jumper Setting JUMPER AUTO (Default) 400 533 JP1 1-2 2-3 OPEN JP3: Clear CMOS Jumper Setting 1-2 (Default) Normal 2-3 Clear CMOS Audio: Front panel Jumper setting PIN Function PIN Function 1 MIC+ 2 Ground 3 Vbias 4 AuD_Vcc (AVCC) 5 AuD_R_Out 6 AuD_R_Out Back 7 N.
Connectors PS/2 (Bottom) PS/2 Keyboard (Down Purple) PS/2 (Top) PS/2 Mouse Header (Up Green) USB 0/1 USB 0/1 Connector Port USB 2/3 USB 2/3 Connector Port LPT Printer Connector Port VGA VGA Display Co.
.
4.3 Memory installation This main board supports DDR200/ DDR266 DDR memory you may install 64/128/256/512MB 184 pin DDR memory. DDR SDROM uses additional power and ground lines and requires 184-pi n 2.5V unbuffered DIMM modul e rather than the 168- pin 3.
4.5 Other Device Installation 4.5.1 Floppy Disk Drive Installation This main board ships with a floppy disk driv e cable that can support one or two drives. Drives can be 3.5” or 5.25” wide, with capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connector s in only one orientation. Find the proper orientation and push down firmly until the conn ectors completely fit.
Click “NEXT” to continue Select “YES” to continue.
Select “NEXT” to continue Select “FINISH” comp leting the installation..
5.3 IAA (Intel Application Accelerator) Setup Insert the driver CD, running driver software CD, choose the directory: CD-ROM:INTELIAAXXX Click “Next” to continue Select “Yes” to continue.
Select “Next” to continue Select “Next” to Continue.
Select “Finish” to complete the ins tallation 5.4 Sound Driver Setup 5.4.1 Sound driver setup (For Realtek s eries of WIN98 operation system) Insert the driver CD, running dr iver software CD, choose the Directory:CD-ROM:SOUN DREALTEKSETUP.
Select “Finish” to complete the ins tallation Channel Sound Output Support Please follow the steps below for operation (optional): 1. After install sound driver’ click “Sound eff ect”, “AC97 audio configuration” options; 2. Click “Sound configuration” select “6 Ch annel mode for 5.
Select “Device manager” to continue Select “PCI Universal Serial Bu s” and double click to continue.
Select “Reinstall Dr iver” to continue Select “Next” to continue.
Select “Next” to continue Select “Specify a location” and type “F:INTELUSB20845WIN98_ME” that.
Select “Next” to continue Select “Next” to Continue.
Select “Next” to Continue Select “Next” to Continue.
Select “OK” to Continue Type “F:INTELUSB20845WIN98_ME” that Select “OK” to continue Select “Finish” continuing 5.5.2 Windows 2000/XP driver setup, new may run windows update to setup by internet.
Chapter 6 BIOS Setup The BIOS Setup Utility record settings and in for mation of your computer, such as date and time, the type of hardware installed, and various configuration settings. Your computers applies those information to in itia lize all the compone nt’s when booting up and basic function of coordinati on between system components.
Setup BIOS provides function, for example virus, boot-strap induct ¾ Advanced Chipset Features Setup main board chipset parameter’ for exam ple DRAM Timing ¾ Integrated Peripherals Setup include m.
¾ Boot Other Device If you enable this item, the system will also s earch for other boot devices if it fails to find an operating system from the first two locations. ¾ Swap Floppy Drive If you have two diskette drives instal led and you enable this item, drive A becomes drive B and drive B becomes drive A.
¾ Init Display First When boot-start the first time detect device Default: PCI slot ¾ Onboard FDC Controller Setup onboard FDC controller Default: Enabled ¾ Onboard Serial Port ½ Setup onboard ser.
6.8 Frequency/Voltage Control ¾ Auto Detect PCI CIK Setup auto detect PCI clock Default: Enabled ¾ CPU Clock Setup CPU BUS frequency Note: The main board auto detect CPU fr equency ‘so you needn’t setup CPU frequency by yourself the CPU can display normal.
An important point after buying a device Intel 845GL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel 845GL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel 845GL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel 845GL you will learn all the available features of the product, as well as information on its operation. The information that you get Intel 845GL will certainly help you make a decision on the purchase.
If you already are a holder of Intel 845GL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel 845GL.
However, one of the most important roles played by the user manual is to help in solving problems with Intel 845GL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel 845GL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
