Instruction/ maintenance manual of the product STC SR00180SE Intec
Go to page of 10
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 1 of 10 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS STC SR00180SE ENGINE INLET AIR FILTER SYSTEM BELL 206 AND 407 SERI ES HELICOPTERS This supplement must.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 2 of 10 RECORD OF REVISIONS REV DATE DESCRIPTION BY IR 11/20/99 INITIAL RELEASE AG/NP A 10/25/02 ADDED FILTER SYSTEM KIT 1206IN1- 1600 AND 1206IN1-1601 TO TITLE PAGE. MINOR REVISIONS TO FILTER ELEMENT SERVICING PROCEDURES.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 3 of 10 TABLE OF CONTENTS SECTION TITLE PAGE 1 Introduction 4 1.1 General Product Information 4 1.2 Scope of ICA 4 1.3 Precautions 4 1.4 Definitions, Abbreviations, Acronyms and Symbols 5 1.5 Distribution 5 2 Airworthiness Limitations 6 3 Inspection/Test Requirement 7 3.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 4 of 10 SECTION 1 Introduction 1.1 General Product Information The engine filter system is designed to protect the turbine engine from foreign object d amage and micro erosion when operating in normal and severe environmental conditions.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 5 of 10 SECTION 1 Introduction (cont.) 1.4 Definitions, Abbreviations, Acronyms, and Symbols The following are used throughout the manual fl.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 6 of 10 SECTION 2 Airworthiness Limitations The Airworthiness Limitations secti on is FAA approved and specifies inspections and other maintenance required under §43.16 and §91.403 of the Federal Aviation Regulations unless an al ternate program has been approved.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 7 of 10 SECTION 3 Inspection/Test Requirements 3.1 General This section covers the basic maintenance and service requirements necessary for safe operation and continued airworthiness of the Model 1206 and 1407 Engine Filter Systems.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 8 of 10 SECTION 4 Filter Element Servicing 4.1 General To insure proper function and maintain a high level of filtration efficiency, great care should be taken when handling the element. The element is most likely to be damaged during servicing than in operation.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 9 of 10 SECTION 4 Filter Element Servicing (cont.) c) Rinse the element with low pressure water from a garden hose. Always flush from the inside to the outside to avoid driving particles further into the filter media.
INTEC 1206 SERIES-ICA-1 REVISION: B – 05/12/03 10 of 10 SECTION 4 Filter Element Servicing (cont.) 4.3.2 Inspection – Normal conditions. At each 150 hours of operation or upon activation of the low inlet pressure warning light, Remove the elements and inspect in accordance with paragraphs 4.
An important point after buying a device Intec STC SR00180SE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intec STC SR00180SE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intec STC SR00180SE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intec STC SR00180SE you will learn all the available features of the product, as well as information on its operation. The information that you get Intec STC SR00180SE will certainly help you make a decision on the purchase.
If you already are a holder of Intec STC SR00180SE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intec STC SR00180SE.
However, one of the most important roles played by the user manual is to help in solving problems with Intec STC SR00180SE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intec STC SR00180SE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
