Instruction/ maintenance manual of the product 8274-( )A 8276-( )A Ingersoll-Rand
Go to page of 12
OPERATOR’S MANUAL SECTION M40 MANUAL 46 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE Released: 4/73 Tool & Hoist Products 2200 SERIES POWER MOTORS Revised: 8-2-93 (44 SERIES GEARING) Form: 286-2 Models 8274-( )A and 8276-( )A IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
MODEL lDENTlFlCATlON MODEL NO. MOTOR R.P.M. GEARING HEAD TOTAL ASS’Y: (FREE SPEED) “2200” I “44” SERIES ASS’Y. REDUCTION fORWARD(REVERSF SERIES DRIVE AUXILIARY 8274-A 41523 I 800 41305 361.
OPERATORS MANUAL M 40 This Parts List and Service Instruction Manual is composed 48 of four sections: A complete Parts List will be found on the various drawings contained in this Manual. GENERAL DESCRIPTION AND OPERATION This Manual is provided to serve as an aid in obtaining the AIR AND LUBE REQUIREMENTS maximum service from this tool.
DISASSEMBLY AND REASSEMBLY OF TOOLS Before starting to disassemble or reassemble this tool (any part or completely) be sure to read Maintenance Section. To minimize the possibility of parts damage and for conve- nience, the steps for disassembly or reassembly listed on the following pages are recommended.
GEARING SECTION M 40 46 GEARING SECTION DRIVE GEARING - “44” SERIES (36162 AND 36163) DISASSEMBLY a. Remove Key (44285) from Spindle. Tap drive end of Spindle with a non-metallic hammer to remove from housing. b. Remove Bearing (36151) and Spacer (36139).
AUXILIARY GEARING - “44” SERIES (36164 AND 36165) DISASSEMBLY REASSEMBLY a. Tap drive end of spindle with a soft face hammer to remove from housing. b. Remove bearing (36151) and spacer (36139). c. Remove shafts (36137), releasing gears from spindle.
GEARING SECTION “2200” SERIES GEARING M 40 46 DISASSEMBLY (41002 AND 41305) REASSEMBLY a. Tap drive end of Spindle with a non-metallic hammer to a. Assemble Snap Ring to Spindle. remove from housing. b. Remove Bearing (33706). Rotate Snap Ring (40842 or 40843) so open portion of ring will allow the removal of one Shaft (40481).
33705 BEARING ROLL PIN Yl76-23 34466 END PLATE 0 TORQUE TO 28 IN. LBS 33701 SPACER 33709 BEARING (FLUSH FACE--INSTALL WITH FLUSH FACE TOWARDS END PLATE) 33700 SEMS FASTENER 0 INCLUDED WITH 38301 X NOT INCLUDED WITH MOTOR 33705 BEARING 33711 SPACER * 33694 NUT TORQUE TO 9- I2 FT LBS 38302-1 MOTOR ASS’Y USED WITH MODELS 8273-( )A 0 TORQUE TO 28 IN.
PIPE PLUG Y227-3 PIPE PLUG (2) Y227-3 L 34497 HEAD FIGURE 7 When assembling Head or Motor Section to models having reversible rotation motor assemblies the following method on head aligning Roll Pin that extends through end plate of assembly is recommended.
.
.
Part of worldwide Ingersoll-Rand PN 49998115.
An important point after buying a device Ingersoll-Rand 8274-( )A 8276-( )A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand 8274-( )A 8276-( )A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand 8274-( )A 8276-( )A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand 8274-( )A 8276-( )A you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand 8274-( )A 8276-( )A will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand 8274-( )A 8276-( )A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand 8274-( )A 8276-( )A.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand 8274-( )A 8276-( )A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand 8274-( )A 8276-( )A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
