Instruction/ maintenance manual of the product 7015-11 Ingersoll-Rand
Go to page of 7
OPERATOR’S MANUAL SECTION M10 MANUAL 16 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE Released: 2/86 Revised: 1-20-95 “0” SERIES DIE GRINDER (SHORT GRINDER) Form: 2884-2 Tool Products Models: 7015-11-(), 8212-1B-( ) and 8213-1B. WARNING READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. WARNING Wear eye protection when operating or performing . . maintenance on this tool. WARNING Turn off air supply and disconnect air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool.
ROUTINE LUBRICATION REQUIREMENTS Lack of or an excessive amount of lubrication will affect the perfor- mance and life of this tool. Use only recommended lubricants at below time intervals: EVERY 8 HOURS OF TOOL OPERATION - Fill lubricator reser- voirof recommended F.
2 INLET HOLES (30912) r 29 j-27* * ITEMS INCLUDED IN SERVICE KIT NO. 39001..
13 M10 PART NUMBER FOR ORDERING 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 LEVER HEAD THROTTLE ASSEMBLY (includes items 1, 2, 3, 4, 5, 6, 8, 9, 12 and 13) . BUTTON HEAD THROTTLE ASSEMBLY (includes items 1, 2, 3, 4, 5, 6, 7, 9, 10 and 11) .
MODEL IDENTIFICATION MODEL NUMBER 7015-11 RPM LEVER END CYLINDER MOTOR COLLET COLLET COLLET THROTTLE THROTTLE HOUSING ASSEMBLY (ITEM 9) (ITEM 12) PLATE ASS’Y ASS’Y (ITEM 31 CAPACITY (ITEM 17) (ITE.
Part of Worldwide Ingersoll-Rand PN 49999-405.
An important point after buying a device Ingersoll-Rand 7015-11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand 7015-11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand 7015-11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand 7015-11 you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand 7015-11 will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand 7015-11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand 7015-11.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand 7015-11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand 7015-11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
